1

NetCDF

unrestricted: unrestricted

eng; USA

Sea Area Fraction [CF-Standard Name]; unit: 0.01

sea_water_potential_temperature [CF-Standard Name]; unit: K

Load of Dry Aerosol Organic Matter [CF-Standard Name]; unit: kg m-2

effective_radius_of_cloud_liquid_water_particle_at_liquid_water_cloud_top [CF-Standard Name]; unit: m

Surface Concentration of Seasalt [CF-Standard Name]; unit: kg m-3

Sea Water Volume [CF-Standard Name]; unit: m3

Concentration of SO4 [CF-Standard Name]; unit: kg m-3

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

sea_ice_x_velocity [CF-Standard Name]; unit: m s-1

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: 1

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

moisture_content_of_soil_layer [CF-Standard Name]; unit: kg m-2

The surface called "surface" means the lower boundary of the atmosphere. Altitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level.[CF-Standard Name]; unit: m

sea_level means mean sea level, which is close to the geoid in sea areas. Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL.[CF-Standard Name]; unit: Pa

[CF-Standard Name]; unit: kg m-2

"condensed_water" means liquid and ice. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. [CF-Standard Name]; unit: kg m-2

tendency_of_sea_ice_amount_due_to_surface_melting [CF-Standard Name]; unit: kg m-2 s-1

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA incoming shortwave flux is the radiative flux from the sun i.e. the "downwelling" TOA shortwave flux. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

surface_downwelling_longwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

"Water" means water in all phases. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called "sublimation".) In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. "Dry deposition" means gravitational settling, impact scavenging and turbulent deposition. [CF-Standard Name]; unit: kg m-2 s-1

Water means water in all phases. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called sublimation.) In accordance with common usage in geophysical disciplines, flux implies per unit area, called flux density in physics. [CF-Standard Name]; unit: kg m-2 s-1

"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Atmosphere water vapor content is sometimes referred to as "precipitable water", although this term does not imply the water could all be precipitated.[CF-Standard Name]; unit: kg m-2

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. Black carbon aerosol is composed of elemental carbon. It is strongly light absorbing. "Wet deposition" means deposition by precipitation. [CF-Standard Name]; unit: kg m-2 s-1

number_concentration_of_cloud_liquid_water_particles_in_air_at_liquid_water_cloud_top [CF-Standard Name]; unit: m-3

sea_water_salinity [CF-Standard Name]; unit: psu

Concentration of SO4 [CF-Standard Name]; unit: kg m-3

Concentration of Dust [CF-Standard Name]; unit: kg m-3

surface_snow_area_fraction [CF-Standard Name]; unit: 0.01

relative_humidity [CF-Standard Name]; unit: 0.01

moisture_content_of_soil_layer [CF-Standard Name]; unit: kg m-2

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

Monthly Maximum Ocean Mixed Layer Thickness De?ned by Mixing Scheme [CF-Standard Name]; unit: m

Speed is the magnitude of velocity. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) The wind speed is the magnitude of the wind velocity.[CF-Standard Name]; unit: m s-1

sea_level means mean sea level, which is close to the geoid in sea areas. Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL.[CF-Standard Name]; unit: Pa

surface_diffuse_downwelling_shortwave_flux_in_air [CF-Standard Name]; unit: W m-2

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

Downwelling Clear-Sky Longwave Radiation [CF-Standard Name]; unit: W m-2

surface_downwelling_longwave_flux_in_air [CF-Standard Name]; unit: W m-2

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

"Water" means water in all phases. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called "sublimation".) In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

sea_ice_surface_temperature [CF-Standard Name]; unit: K

air_pressure_at_convective_cloud_top [CF-Standard Name]; unit: Pa

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of "area_fraction", provide a coordinate variable or scalar coordinate variable of "area_type". Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X. [CF-Standard Name]; unit: 0.01

Evaporation from Canopy [CF-Standard Name]; unit: kg m-2 s-1

The surface called "surface" means the lower boundary of the atmosphere. The surface temperature is the (skin) temperature at the interface, not the bulk temperature of the medium above or below. [CF-Standard Name]; unit: K

Mole Fraction of N2O [CF-Standard Name]; unit: 1e-9

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. located anywhere within the atmosphere, including at the lower boundary (i.e. earth' surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. [CF-Standard Name]; unit: kg m-2 s-1

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. "Dry deposition" means gravitational settling, impact scavenging and turbulent deposition. [CF-Standard Name]; unit: kg m-2 s-1

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except black carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol. "Dry deposition" means gravitational settling, impact scavenging and turbulent deposition. [CF-Standard Name]; unit: kg m-2 s-1

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except black carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol. "Wet deposition" means deposition by precipitation. [CF-Standard Name]; unit: kg m-2 s-1

Ocean Grid-Cell Volume [CF-Standard Name]; unit: m3

Load of SO4 [CF-Standard Name]; unit: kg m-2

Virtual Salt Flux into Sea Water due to Sea Ice Thermodynamics [CF-Standard Name]; unit: kg m-2 s-1

The surface called "surface" means the lower boundary of the atmosphere. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. For unit "m day-1" the water equivalent of snow melt is given. [CF-Standard Name]; unit: kg m-2 s-1

Load of Black Carbon Aerosol [CF-Standard Name]; unit: kg m-2

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: 1

Square of Sea Surface Temperature [CF-Standard Name]; unit: K2

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface sensible heat flux, also called "turbulent" heat flux, is the exchange of heat between the surface and the air by motion of air. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

Runoff is the liquid water which drains from land. If not specified, "runoff" refers to the sum of surface runoff and subsurface drainage. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

Model Grid-Cell Area [CF-Standard Name]; unit: m2

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of "area_fraction", provide a coordinate variable or scalar coordinate variable of "area_type". Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X. [CF-Standard Name]; unit: 0.01

The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

atmosphere_mass_of_carbon_dioxide [CF-Standard Name]; unit: kg

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

tendency_of_sea_ice_amount_due_to_basal_melting [CF-Standard Name]; unit: kg m-2 s-1

atmosphere_net_upward_convective_mass_flux [CF-Standard Name]; unit: kg m-2 s-1

Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface. [CF-Standard Name]; unit: m

"X_area" means the horizontal area occupied by X within the grid cell.[CF-Standard Name]; unit: 1

The surface called "surface" means the lower boundary of the atmosphere. Runoff is the liquid water which drains from land. If not specified, "runoff" refers to the sum of surface runoff and subsurface drainage. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

sea_ice_x_transport [CF-Standard Name]; unit: kg s-1

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. [CF-Standard Name]; unit: 1e-9

tendency_of_sea_ice_amount_due_to_frazil_ice_accumulation_in_leads [CF-Standard Name]; unit: kg m-2 s-1

The surface called "surface" means the lower boundary of the atmosphere. "Northward" indicates a vector component which is positive when directed northward (negative southward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward northward" indicates the ZY component of a tensor. A downward northward stress is a downward flux of northward momentum, which accelerates the lower medium northward and the upper medium southward. The surface downward stress is the windstress on the surface. [CF-Standard Name]; unit: Pa

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. Black carbon aerosol is composed of elemental carbon. It is strongly light absorbing. "Dry deposition" means gravitational settling, impact scavenging and turbulent deposition. [CF-Standard Name]; unit: kg m-2 s-1

temperature_in_surface_snow [CF-Standard Name]; unit: K

Sublimation over Sea Ice [CF-Standard Name]; unit: kg m-2 s-1

Water Flux into Sea Water due to Sea Ice Thermodynamics [CF-Standard Name]; unit: kg m-2 s-1

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: 1

Runoff is the liquid water which drains from land. If not specified, "runoff" refers to the sum of surface runoff and subsurface drainage. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: 0.01

surface_downwelling_longwave_flux_in_air [CF-Standard Name]; unit: W m-2

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface latent heat flux is the exchange of heat between the surface and the air on account of evaporation (including sublimation). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

"longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

"moisture" means water in all phases contained in soil. "Content" indicates a quantity per unit area. The "soil content" of a quantity refers to the vertical integral from the surface down to the bottom of the soil model. For the content between specified levels in the soil, standard names including content_of_soil_layer are used. The field capacity of soil is the maximum content of water it can retain against gravitational drainage. [CF-Standard Name]; unit: kg m-2

A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

Lateral Sea Ice Growth Rate

Used in MIP table(s): CMOR Table OImon: Monthly Mean Ocean Cryosphere Fields

Comment in standard_output document: the rate of change of sea ice mass due to lateral growth alone of the sea ice divided by the area of the ocean portion of the grid cell. Reported as 0.0 in regions free of sea ice.

Code list created on 2012-10-16 out of standard_output document ( http://cmip-pcmdi.llnl.gov/cmip5/docs/standard_output.xlsx )

cf:"Amount" means mass per unit area. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. An ice floe is a flat expanse of sea ice, generally taken to be less than 10 km across. "Lateral growth of ice floe" means the accumulation of ice at the extreme edges of the ice area. [CF-Standard Name]; unit: kg m-2 s-1

"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of "area_fraction", provide a coordinate variable or scalar coordinate variable of "area_type". Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X. [CF-Standard Name]; unit: 0.01

air_pressure_at_convective_cloud_base [CF-Standard Name]; unit: Pa

Mole Fraction of CH4 [CF-Standard Name]; unit: 1e-9

"tendency_of_X" means derivative of X with respect to time. The Lagrangian tendency of a quantity is its rate of change following the motion of the fluid, also called the "material derivative" or "convective derivative". The Lagrangian tendency of air pressure, often called "omega", plays the role of the upward component of air velocity when air pressure is being used as the vertical coordinate. If the vertical air velocity is upwards, it is negative when expressed as a tendency of air pressure; downwards is positive.[CF-Standard Name]; unit: Pa s-1

"moisture" means water in all phases contained in soil. "Content" indicates a quantity per unit area. The "soil content" of a quantity refers to the vertical integral from the surface down to the bottom of the soil model. For the content between specified levels in the soil, standard names including content_of_soil_layer are used. [CF-Standard Name]; unit: kg m-2

"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of "area_fraction", provide a coordinate variable or scalar coordinate variable of "area_type". Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X. [CF-Standard Name]; unit: 0.01

sea_ice_y_transport [CF-Standard Name]; unit: kg s-1

"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of "area_fraction", provide a coordinate variable or scalar coordinate variable of "area_type". Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X. [CF-Standard Name]; unit: 0.01

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: 1

[CF-Standard Name]; unit: kg m-2 s-1

surface_downwelling_shortwave_flux_in_air [CF-Standard Name]; unit: W m-2

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. [CF-Standard Name]; unit: kg m-2 s-1

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. "Wet deposition" means deposition by precipitation. [CF-Standard Name]; unit: kg m-2 s-1

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Dry deposition" means gravitational settling, impact scavenging and turbulent deposition. [CF-Standard Name]; unit: kg m-2 s-1

Dry Deposition Rate of DMS [CF-Standard Name]; unit: kg m-2 s-1

Sea Floor Depth [CF-Standard Name]; unit: m

Ocean Model Cell Thickness [CF-Standard Name]; unit: m

Ambient Aerosol Opitical Thickness at 550 nm [CF-Standard Name]; unit: 1

Global Average Thermosteric Sea Level Change [CF-Standard Name]; unit: m

Concentration of Dry Aerosol Organic Matter [CF-Standard Name]; unit: kg m-3

sea_water_potential_temperature [CF-Standard Name]; unit: K

heat_flux_into_sea_water_due_to_freezing_of_frazil_ice [CF-Standard Name]; unit: W m-2

Heat Flux into Sea Water due to Sea Ice Thermodynamics [CF-Standard Name]; unit: W m-2

sea_surface_height_above_geoid [CF-Standard Name]; unit: m

Square of Upward Ocean Mass Transport [CF-Standard Name]; unit: kg2 s-2

Concentration of Dry Aerosol Organic Matter [CF-Standard Name]; unit: kg m-3

relative_humidity [CF-Standard Name]; unit: 0.01

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

sea_level means mean sea level, which is close to the geoid in sea areas. Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL.[CF-Standard Name]; unit: Pa

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

"tendency_of_X" means derivative of X with respect to time. The Lagrangian tendency of a quantity is its rate of change following the motion of the fluid, also called the "material derivative" or "convective derivative". The Lagrangian tendency of air pressure, often called "omega", plays the role of the upward component of air velocity when air pressure is being used as the vertical coordinate. If the vertical air velocity is upwards, it is negative when expressed as a tendency of air pressure; downwards is positive.[CF-Standard Name]; unit: Pa s-1

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. "Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock. [CF-Standard Name]; unit: 0.01

surface_upwelling_shortwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface sensible heat flux, also called "turbulent" heat flux, is the exchange of heat between the surface and the air by motion of air. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: 0.01

relative_humidity [CF-Standard Name]; unit: 0.01

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: 1

relative_humidity [CF-Standard Name]; unit: 0.01

sea_ice_area_fraction [CF-Standard Name]; unit: 0.01

surface_downwelling_shortwave_flux_in_air [CF-Standard Name]; unit: W m-2

"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of "area_fraction", provide a coordinate variable or scalar coordinate variable of "area_type". Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X. [CF-Standard Name]; unit: 0.01

"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of "area_fraction", provide a coordinate variable or scalar coordinate variable of "area_type". Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X. [CF-Standard Name]; unit: 0.01

The surface called "surface" means the lower boundary of the atmosphere. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward eastward" indicates the ZX component of a tensor. A downward eastward stress is a downward flux of eastward momentum, which accelerates the lower medium eastward and the upper medium westward. The surface downward stress is the windstress on the surface. [CF-Standard Name]; unit: Pa

Model Grid-Cell Area [CF-Standard Name]; unit: m2

sea_water_salinity [CF-Standard Name]; unit: psu

surface_snow_thickness [CF-Standard Name]; unit: m

Sea Water Mass Per Unit Area [CF-Standard Name]; unit: kg m-2

sea_water_y_velocity [CF-Standard Name]; unit: m s-1

Global Average Sea Level Change [CF-Standard Name]; unit: m

Surface Concentration of Black Carbon Aerosol [CF-Standard Name]; unit: kg m-3

The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

The surface called "surface" means the lower boundary of the atmosphere. The surface temperature is the (skin) temperature at the interface, not the bulk temperature of the medium above or below. [CF-Standard Name]; unit: K

sea_ice_thickness [CF-Standard Name]; unit: m

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

The surface called "surface" means the lower boundary of the atmosphere. The surface temperature is the (skin) temperature at the interface, not the bulk temperature of the medium above or below. [CF-Standard Name]; unit: K

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: 0.01

surface_snow_amount [CF-Standard Name]; unit: kg m-2

Sea surface temperature is usually abbreviated as "SST". It is the temperature of sea water near the surface (including the part under sea-ice, if any), and not the skin temperature, whose standard name is surface_temperature. For the temperature of sea water at a particular depth or layer, a data variable of sea_water_temperature with a vertical coordinate axis should be used. [CF-Standard Name]; unit: K

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

The surface called "surface" means the lower boundary of the atmosphere.[CF-Standard Name]; unit: Pa

surface_downwelling_shortwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface latent heat flux is the exchange of heat between the surface and the air on account of evaporation (including sublimation). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

tendency_of_sea_ice_amount_due_to_congelation_ice_accumulation [CF-Standard Name]; unit: kg m-2 s-1

The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

tendency_of_atmosphere_mass_content_of_dimethyl_sulfide_due_to_emission [CF-Standard Name]; unit: kg m-2 s-1

moisture_content_of_soil_layer [CF-Standard Name]; unit: kg m-2

sea_ice_thickness [CF-Standard Name]; unit: m

"longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

[CF-Standard Name]; unit: kg m-2 s-1

[CF-Standard Name]; unit: kg m-2 s-1

Sea Water Mass [CF-Standard Name]; unit: kg

Downward Sea Ice Basal Salt Flux [CF-Standard Name]; unit: kg m-2 s-1

Load of Seasalt [CF-Standard Name]; unit: kg m-2

surface_snow_amount [CF-Standard Name]; unit: kg m-2

Load of Dust [CF-Standard Name]; unit: kg m-2

Surface Concentration of Black Carbon Aerosol [CF-Standard Name]; unit: kg m-3

Surface Concentration of Seasalt [CF-Standard Name]; unit: kg m-3

number_concentration_of_cloud_liquid_water_particles_in_air [CF-Standard Name]; unit: m-3

The surface called "surface" means the lower boundary of the atmosphere. The surface temperature is the (skin) temperature at the interface, not the bulk temperature of the medium above or below. [CF-Standard Name]; unit: K

sea_ice_y_velocity [CF-Standard Name]; unit: m s-1

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: 1

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

relative_humidity [CF-Standard Name]; unit: 0.01

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface sensible heat flux, also called "turbulent" heat flux, is the exchange of heat between the surface and the air by motion of air. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

surface_upwelling_shortwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

The surface called "surface" means the lower boundary of the atmosphere.[CF-Standard Name]; unit: Pa

surface_snow_area_fraction [CF-Standard Name]; unit: 0.01

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell.[CF-Standard Name]; unit: 0.01

The surface called "surface" means the lower boundary of the atmosphere.[CF-Standard Name]; unit: Pa

Region Selection Index [CF-Standard Name]; unit: 1

The surface called "surface" means the lower boundary of the atmosphere. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. For unit "m day-1" the water equivalent of snow melt is given. [CF-Standard Name]; unit: kg m-2 s-1

Net Downward Flux at Top of Model [CF-Standard Name]; unit: W m-2

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. [CF-Standard Name]; unit: kg m-2

Soil Frozen Water Content [CF-Standard Name]; unit: kg m-2

surface_downwelling_longwave_flux_in_air [CF-Standard Name]; unit: W m-2

"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of "area_fraction", provide a coordinate variable or scalar coordinate variable of "area_type". Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X. [CF-Standard Name]; unit: 0.01

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of Y to the mass of X (including Y). [CF-Standard Name]; unit: 1

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface latent heat flux is the exchange of heat between the surface and the air on account of evaporation (including sublimation). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

[CF-Standard Name]; unit: kg m-2 s-1

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

Sea Water Pressure at Sea floor [CF-Standard Name]; unit: dbar

Global Average Steric Sea Level Change [CF-Standard Name]; unit: m

sea_water_x_velocity [CF-Standard Name]; unit: m s-1

surface_downward_heat_flux_in_snow [CF-Standard Name]; unit: W m-2

Upward Ocean Mass Transport [CF-Standard Name]; unit: kg s-1

surface_downward_heat_flux_in_sea_water [CF-Standard Name]; unit: W m-2

Concentration of Dust [CF-Standard Name]; unit: kg m-3

relative_humidity [CF-Standard Name]; unit: 0.01

sea_ice_area_fraction [CF-Standard Name]; unit: 0.01

Speed is the magnitude of velocity. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) The wind speed is the magnitude of the wind velocity.[CF-Standard Name]; unit: m s-1

surface_downwelling_shortwave_flux_in_air [CF-Standard Name]; unit: W m-2

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

surface_downwelling_shortwave_flux_in_air [CF-Standard Name]; unit: W m-2

Depth is the vertical distance below the surface. The root depth is maximum depth of soil reached by plant roots, from which they can extract moisture.[CF-Standard Name]; unit: m

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of Y to the mass of X (including Y). [CF-Standard Name]; unit: 1

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 0.01

surface_downwelling_shortwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA outgoing shortwave flux is the reflected and scattered solar radiative flux i.e. the "upwelling" TOA shortwave flux, sometimes called the "outgoing shortwave radiation" or "OSR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

rainfall_flux [CF-Standard Name]; unit: kg m-2 s-1

Runoff is the liquid water which drains from land. If not specified, "runoff" refers to the sum of surface runoff and subsurface drainage. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

toa_outgoing_shortwave_flux_assuming_clear_sky [CF-Standard Name]; unit: W m-2

Speed is the magnitude of velocity. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) The wind speed is the magnitude of the wind velocity.[CF-Standard Name]; unit: m s-1

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

Dry Deposition Rate of SO4 [CF-Standard Name]; unit: kg m-2 s-1

The surface called "surface" means the lower boundary of the atmosphere. The surface temperature is the (skin) temperature at the interface, not the bulk temperature of the medium above or below. [CF-Standard Name]; unit: K

moisture_content_of_soil_layer [CF-Standard Name]; unit: kg m-2

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. Black carbon aerosol is composed of elemental carbon. It is strongly light absorbing. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. [CF-Standard Name]; unit: kg m-2 s-1

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. "Wet deposition" means deposition by precipitation. [CF-Standard Name]; unit: kg m-2 s-1

eng; USA

MIMH85

ISO 19115

ISO 19115-2:2009