1

NetCDF

unrestricted: unrestricted

eng; USA

Speed is the magnitude of velocity. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) The wind speed is the magnitude of the wind velocity.[CF-Standard Name]; unit: not filled

Load of Seasalt [CF-Standard Name]; unit: not filled

surface_downwelling_shortwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: not filled

Surface Concentration of Dry Aerosol Secondary Organic Matter [CF-Standard Name]; unit: not filled

PARASOL Reflectance [CF-Standard Name]; unit: not filled

The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

Soil temperature is the bulk temperature of the soil, not the surface (skin) temperature. [CF-Standard Name]; unit: not filled

The surface called "surface" means the lower boundary of the atmosphere. Altitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level.[CF-Standard Name]; unit: m

The surface called "surface" means the lower boundary of the atmosphere. "Northward" indicates a vector component which is positive when directed northward (negative southward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward northward" indicates the ZY component of a tensor. A downward northward stress is a downward flux of northward momentum, which accelerates the lower medium northward and the upper medium southward. The surface downward stress is the windstress on the surface. [CF-Standard Name]; unit: not filled

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: not filled

"longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

air_pressure_at_cloud_top [CF-Standard Name]; unit: not filled

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: not filled

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: not filled

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: not filled

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

surface_downwelling_longwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: not filled

convection_time_fraction [CF-Standard Name]; unit: not filled

toa_outgoing_shortwave_flux_assuming_clear_sky [CF-Standard Name]; unit: not filled

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: not filled

"longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface latent heat flux is the exchange of heat between the surface and the air on account of evaporation (including sublimation). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: not filled

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). 'Emission' is a process entirely distinct from "re-emission" which is used in some standard names. [CF-Standard Name]; unit: not filled

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface sensible heat flux, also called "turbulent" heat flux, is the exchange of heat between the surface and the air by motion of air. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: not filled

"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA outgoing shortwave flux is the reflected and scattered solar radiative flux i.e. the "upwelling" TOA shortwave flux, sometimes called the "outgoing shortwave radiation" or "OSR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: not filled

The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: not filled

Soil Frozen Water Content [CF-Standard Name]; unit: not filled

"tendency_of_X" means derivative of X with respect to time. The Lagrangian tendency of a quantity is its rate of change following the motion of the fluid, also called the "material derivative" or "convective derivative". The Lagrangian tendency of air pressure, often called "omega", plays the role of the upward component of air velocity when air pressure is being used as the vertical coordinate. If the vertical air velocity is upwards, it is negative when expressed as a tendency of air pressure; downwards is positive.[CF-Standard Name]; unit: not filled

effective_radius_of_cloud_liquid_water_particle_at_liquid_water_cloud_top [CF-Standard Name]; unit: not filled

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: not filled

air_pressure_at_convective_cloud_base [CF-Standard Name]; unit: not filled

Concentration of Dust [CF-Standard Name]; unit: not filled

"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA outgoing shortwave flux is the reflected and scattered solar radiative flux i.e. the "upwelling" TOA shortwave flux, sometimes called the "outgoing shortwave radiation" or "OSR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

ISCCP Mean Cloud Albedo [CF-Standard Name]; unit: not filled

The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

Column Integrated Cloud Droplet Number [CF-Standard Name]; unit: not filled

Ambient Aerosol Opitical Thickness at 550 nm [CF-Standard Name]; unit: not filled

moisture_content_of_soil_layer [CF-Standard Name]; unit: not filled

[CF-Standard Name]; unit: not filled

Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. [CF-Standard Name]; unit: not filled

air_pressure_at_convective_cloud_top [CF-Standard Name]; unit: not filled

toa_outgoing_shortwave_flux_assuming_clear_sky [CF-Standard Name]; unit: not filled

relative_humidity [CF-Standard Name]; unit: not filled

Surface Concentration of Black Carbon Aerosol [CF-Standard Name]; unit: not filled

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. Black carbon aerosol is composed of elemental carbon. It is strongly light absorbing. "Dry deposition" means gravitational settling, impact scavenging and turbulent deposition. [CF-Standard Name]; unit: not filled

A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

sea_level means mean sea level, which is close to the geoid in sea areas. Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL.[CF-Standard Name]; unit: not filled

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: not filled

Carbon Mass Flux into Atmosphere due to Maintenance Autotrophic Respiration on Land

Used in MIP table(s): CMOR Table Lmon: Monthly Mean Land Fields, Including

Code list created on 2012-10-16 out of standard_output document ( http://cmip-pcmdi.llnl.gov/cmip5/docs/standard_output.xlsx )

cf:"Upward" indicates a vector component which is positive when directed upward (negative downward). Plant respiration is the sum of respiration by parts of plants both above and below the soil. Plants which photosynthesise are autotrophs i.e."producers" of the biomass which they respire from inorganic precursors using sunlight for energy. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The surface called "surface" means the lower boundary of the atmosphere. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. [CF-Standard Name]; unit: not filled

Model Grid-Cell Area [CF-Standard Name]; unit: m2

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: not filled

The surface called "surface" means the lower boundary of the atmosphere.[CF-Standard Name]; unit: not filled

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: not filled

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: not filled

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. "Dry deposition" means gravitational settling, impact scavenging and turbulent deposition. [CF-Standard Name]; unit: not filled

surface_downwelling_longwave_flux_in_air [CF-Standard Name]; unit: not filled

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: not filled

A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

surface_snow_amount [CF-Standard Name]; unit: not filled

air_pressure_at_convective_cloud_base [CF-Standard Name]; unit: not filled

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: not filled

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: not filled

[CF-Standard Name]; unit: not filled

"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA incoming shortwave flux is the radiative flux from the sun i.e. the "downwelling" TOA shortwave flux. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

atmosphere_net_upward_convective_mass_flux [CF-Standard Name]; unit: not filled

The surface called "surface" means the lower boundary of the atmosphere.[CF-Standard Name]; unit: not filled

Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface. [CF-Standard Name]; unit: not filled

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of Y to the mass of X (including Y). [CF-Standard Name]; unit: not filled

shallow_convection_time_fraction [CF-Standard Name]; unit: not filled

Load of SO4 [CF-Standard Name]; unit: not filled

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: not filled

air_pressure_at_cloud_top [CF-Standard Name]; unit: not filled

surface_upwelling_shortwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: not filled

Speed is the magnitude of velocity. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) The wind speed is the magnitude of the wind velocity.[CF-Standard Name]; unit: not filled

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: not filled

"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA outgoing shortwave flux is the reflected and scattered solar radiative flux i.e. the "upwelling" TOA shortwave flux, sometimes called the "outgoing shortwave radiation" or "OSR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

surface_downwelling_shortwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: not filled

"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA incoming shortwave flux is the radiative flux from the sun i.e. the "downwelling" TOA shortwave flux. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: not filled

"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Atmosphere water vapor content is sometimes referred to as "precipitable water", although this term does not imply the water could all be precipitated.[CF-Standard Name]; unit: not filled

[CF-Standard Name]; unit: not filled

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: not filled

surface_upwelling_shortwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: not filled

"condensed_water" means liquid and ice. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. [CF-Standard Name]; unit: not filled

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Dry deposition" means gravitational settling, impact scavenging and turbulent deposition. [CF-Standard Name]; unit: not filled

tendency_of_atmosphere_mass_content_of_dimethyl_sulfide_due_to_emission [CF-Standard Name]; unit: not filled

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: not filled

Sublimation over Sea Ice [CF-Standard Name]; unit: not filled

"longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

Ambient Aerosol Opitical Thickness at 550 nm [CF-Standard Name]; unit: not filled

A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

ISCCP Cloud Area Fraction [CF-Standard Name]; unit: not filled

surface_downwelling_shortwave_flux_in_air [CF-Standard Name]; unit: not filled

"tendency_of_X" means derivative of X with respect to time. The Lagrangian tendency of a quantity is its rate of change following the motion of the fluid, also called the "material derivative" or "convective derivative". The Lagrangian tendency of air pressure, often called "omega", plays the role of the upward component of air velocity when air pressure is being used as the vertical coordinate. If the vertical air velocity is upwards, it is negative when expressed as a tendency of air pressure; downwards is positive.[CF-Standard Name]; unit: not filled

surface_downwelling_longwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: not filled

Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. [CF-Standard Name]; unit: not filled

moisture_content_of_soil_layer [CF-Standard Name]; unit: not filled

Precipitation onto Canopy [CF-Standard Name]; unit: not filled

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: not filled

ISCCP Mean Cloud Albedo [CF-Standard Name]; unit: not filled

Carbon Mass Flux into Atmosphere due to Growth Autotrophic Respiration on Land

Used in MIP table(s): CMOR Table Lmon: Monthly Mean Land Fields, Including

Code list created on 2012-10-16 out of standard_output document ( http://cmip-pcmdi.llnl.gov/cmip5/docs/standard_output.xlsx )

cf:"Upward" indicates a vector component which is positive when directed upward (negative downward). Plant respiration is the sum of respiration by parts of plants both above and below the soil. Plants which photosynthesise are autotrophs i.e."producers" of the biomass which they respire from inorganic precursors using sunlight for energy. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The surface called "surface" means the lower boundary of the atmosphere. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. [CF-Standard Name]; unit: not filled

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. "Primary particulate organic matter " means all organic matter emitted directly to the atmosphere as particles except black carbon. The sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol is particulate_organic_matter_dry_aerosol. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. [CF-Standard Name]; unit: not filled

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of Y to the mass of X (including Y). [CF-Standard Name]; unit: not filled

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

Net primary productivity is the excess of gross_primary_producivity (rate of synthesis of biomass per unit area from inorganic precursors by autotrophs, or "producers", especially by photosynthesising plants using sunlight for energy) over the rate at which they themselves respire some of this biomass (plant_respiration, assuming all producers to be plants). "Productivity of carbon" refers to the production of biomass expressed as the mass of carbon which it contains. [CF-Standard Name]; unit: not filled

surface_downwelling_shortwave_flux_in_air [CF-Standard Name]; unit: not filled

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: not filled

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: not filled

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: not filled

Evaporation from Canopy [CF-Standard Name]; unit: not filled

Surface Concentration of Seasalt [CF-Standard Name]; unit: not filled

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. [CF-Standard Name]; unit: not filled

Concentration of SO4 [CF-Standard Name]; unit: not filled

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: not filled

relative_humidity [CF-Standard Name]; unit: not filled

"moisture" means water in all phases contained in soil. "Content" indicates a quantity per unit area. The "soil content" of a quantity refers to the vertical integral from the surface down to the bottom of the soil model. For the content between specified levels in the soil, standard names including content_of_soil_layer are used. [CF-Standard Name]; unit: not filled

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell.[CF-Standard Name]; unit: 0.01

Load of Dust [CF-Standard Name]; unit: not filled

surface_downwelling_longwave_flux_in_air [CF-Standard Name]; unit: not filled

PARASOL Reflectance [CF-Standard Name]; unit: not filled

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface latent heat flux is the exchange of heat between the surface and the air on account of evaporation (including sublimation). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: not filled

Gross primary productivity is the rate of synthesis of biomass per unit area from inorganic precursors by autotrophs, especially by photosynthesising plants using sunlight for energy. The producers also respire some of this biomass and the difference is net_primary_producivity. "Productivity of carbon" refers to the production of biomass expressed as the mass of carbon which it contains. [CF-Standard Name]; unit: not filled

The surface called "surface" means the lower boundary of the atmosphere. The surface temperature is the (skin) temperature at the interface, not the bulk temperature of the medium above or below. [CF-Standard Name]; unit: not filled

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. Black carbon aerosol is composed of elemental carbon. It is strongly light absorbing. "Wet deposition" means deposition by precipitation. [CF-Standard Name]; unit: not filled

Load of Black Carbon Aerosol [CF-Standard Name]; unit: not filled

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface sensible heat flux, also called "turbulent" heat flux, is the exchange of heat between the surface and the air by motion of air. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: not filled

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

sea_level means mean sea level, which is close to the geoid in sea areas. Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL.[CF-Standard Name]; unit: not filled

Load of Dry Aerosol Secondary Organic Matter [CF-Standard Name]; unit: not filled

Net Carbon Mass Flux out of Atmophere due to Net Ecosystem Productivity on Land.

Used in MIP table(s): CMOR Table Lmon: Monthly Mean Land Fields, Including

Comment in standard_output document: Natural flux of CO2 (expressed as a mass flux of carbon) from the atmosphere to the land calculated as the difference between uptake associated will photosynthesis and the release of CO2 from the sum of plant and soil respiration and fire. Positive flux is into the land. emissions from natural fires + human ignition fires as calculated by the fire module of the DGVM, but excluding any CO2 flux from fire included in fLuc, defined below (CO2 Flux to Atmosphere from Land Use Change).

Code list created on 2012-10-16 out of standard_output document ( http://cmip-pcmdi.llnl.gov/cmip5/docs/standard_output.xlsx )

cf:"Downward" indicates a vector component which is positive when directed downward (negative upward). The phrase 'expressed_as' is used in the construction A_expressed_as_B, where B is a chemical constituent of A. It means that the quantity indicated by the standard name is calculated solely with respect to the B contained in A, neglecting all other chemical constituents of A. "All land processes" means plant and soil respiration, photosynthesis, animal grazing, crop harvesting, natural fires and anthropogenic land use change. "Anthropogenic land use change" means human changes to land, excluding forest regrowth. It includes fires ignited by humans for the purpose of land use change and the processes of eventual disposal and decomposition of wood products such as paper, cardboard, furniture and timber for construction. The quantity with standard name surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes is equal to the difference between the quantities with standard names surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes_excluding_anthropogenic_land_use_change and surface_net_upward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_emission_from_anthropogenic_land_use_change. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The chemical formula for carbon dioxide is CO2. [CF-Standard Name]; unit: not filled

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. Black carbon aerosol is composed of elemental carbon. It is strongly light absorbing. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. [CF-Standard Name]; unit: not filled

[CF-Standard Name]; unit: not filled

"condensed_water" means liquid and ice. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. [CF-Standard Name]; unit: not filled

toa_outgoing_shortwave_flux_assuming_clear_sky [CF-Standard Name]; unit: not filled

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: not filled

The surface called "surface" means the lower boundary of the atmosphere. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward eastward" indicates the ZX component of a tensor. A downward eastward stress is a downward flux of eastward momentum, which accelerates the lower medium eastward and the upper medium westward. The surface downward stress is the windstress on the surface. [CF-Standard Name]; unit: not filled

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: not filled

"Water" means water in all phases. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called "sublimation".) In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: not filled

air_pressure_at_convective_cloud_top [CF-Standard Name]; unit: not filled

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: not filled

eng; USA

MOGAsc

ISO 19115

ISO 19115-2:2009