1

NetCDF

unrestricted: unrestricted

eng; USA

relative_humidity [CF-Standard Name]; unit: 0.01

not filled; unit: 0.01

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA incoming shortwave flux is the radiative flux from the sun i.e. the "downwelling" TOA shortwave flux. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

"longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

ISCCP Cloud Area Fraction [CF-Standard Name]; unit: 0.01

"tendency_of_X" means derivative of X with respect to time. The Lagrangian tendency of a quantity is its rate of change following the motion of the fluid, also called the "material derivative" or "convective derivative". The Lagrangian tendency of air pressure, often called "omega", plays the role of the upward component of air velocity when air pressure is being used as the vertical coordinate. If the vertical air velocity is upwards, it is negative when expressed as a tendency of air pressure; downwards is positive.[CF-Standard Name]; unit: Pa s-1

surface_downwelling_longwave_flux_in_air [CF-Standard Name]; unit: W m-2

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface sensible heat flux, also called "turbulent" heat flux, is the exchange of heat between the surface and the air by motion of air. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

ISCCP Cloud Area Fraction [CF-Standard Name]; unit: 0.01

surface_snow_area_fraction [CF-Standard Name]; unit: 0.01

surface_upwelling_shortwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. [CF-Standard Name]; unit: kg m-2

relative_humidity [CF-Standard Name]; unit: 0.01

The surface called "surface" means the lower boundary of the atmosphere. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. For unit "m day-1" the water equivalent of snow melt is given. [CF-Standard Name]; unit: kg m-2 s-1

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

Net Downward Flux at Top of Model [CF-Standard Name]; unit: W m-2

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of Y to the mass of X (including Y). [CF-Standard Name]; unit: 1

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

"longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: not filled

The surface called "surface" means the lower boundary of the atmosphere. Altitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level.[CF-Standard Name]; unit: m

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: not filled

"tendency_of_X" means derivative of X with respect to time. Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: not filled

Specific humidity is the mass fraction of water vapor in (moist) air. [CF-Standard Name]; unit: not filled

Soil temperature is the bulk temperature of the soil, not the surface (skin) temperature. [CF-Standard Name]; unit: not filled

The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of Y to the mass of X (including Y). [CF-Standard Name]; unit: not filled

relative_humidity [CF-Standard Name]; unit: not filled

relative_humidity [CF-Standard Name]; unit: not filled

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface. [CF-Standard Name]; unit: not filled

Net Downward Flux at Top of Model [CF-Standard Name]; unit: W m-2

"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA incoming shortwave flux is the radiative flux from the sun i.e. the "downwelling" TOA shortwave flux. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Atmosphere water vapor content is sometimes referred to as "precipitable water", although this term does not imply the water could all be precipitated.[CF-Standard Name]; unit: kg m-2

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

The surface called "surface" means the lower boundary of the atmosphere.[CF-Standard Name]; unit: Pa

time [CF-Standard Name]; unit: day

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 0.01

surface_upwelling_shortwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

"condensed_water" means liquid and ice. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. [CF-Standard Name]; unit: kg m-2

The surface called "surface" means the lower boundary of the atmosphere.[CF-Standard Name]; unit: Pa

surface_downwelling_shortwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

The surface called "surface" means the lower boundary of the atmosphere. "Northward" indicates a vector component which is positive when directed northward (negative southward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward northward" indicates the ZY component of a tensor. A downward northward stress is a downward flux of northward momentum, which accelerates the lower medium northward and the upper medium southward. The surface downward stress is the windstress on the surface. [CF-Standard Name]; unit: Pa

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

sea_level means mean sea level, which is close to the geoid in sea areas. Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL.[CF-Standard Name]; unit: Pa

The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

Mass Fraction of Stratiform Cloud Ice [CF-Standard Name]; unit: 1

surface_snow_thickness [CF-Standard Name]; unit: m

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

Tendency of Air Temperature due to Radiative Heating [CF-Standard Name]; unit: not filled

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: not filled

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface sensible heat flux, also called "turbulent" heat flux, is the exchange of heat between the surface and the air by motion of air. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: not filled

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: not filled

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: not filled

Soil Frozen Water Content [CF-Standard Name]; unit: not filled

Tendency of Air Temperature due to Diabatic Processes [CF-Standard Name]; unit: not filled

"tendency_of_X" means derivative of X with respect to time. The Lagrangian tendency of a quantity is its rate of change following the motion of the fluid, also called the "material derivative" or "convective derivative". The Lagrangian tendency of air pressure, often called "omega", plays the role of the upward component of air velocity when air pressure is being used as the vertical coordinate. If the vertical air velocity is upwards, it is negative when expressed as a tendency of air pressure; downwards is positive.[CF-Standard Name]; unit: not filled

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: not filled

"tendency_of_X" means derivative of X with respect to time. The Lagrangian tendency of a quantity is its rate of change following the motion of the fluid, also called the "material derivative" or "convective derivative". The Lagrangian tendency of air pressure, often called "omega", plays the role of the upward component of air velocity when air pressure is being used as the vertical coordinate. If the vertical air velocity is upwards, it is negative when expressed as a tendency of air pressure; downwards is positive.[CF-Standard Name]; unit: not filled

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: not filled

The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. [CF-Standard Name]; unit: kg m-2

Sublimation over Sea Ice [CF-Standard Name]; unit: kg m-2 s-1

A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

surface_downwelling_longwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

"tendency_of_X" means derivative of X with respect to time. The Lagrangian tendency of a quantity is its rate of change following the motion of the fluid, also called the "material derivative" or "convective derivative". The Lagrangian tendency of air pressure, often called "omega", plays the role of the upward component of air velocity when air pressure is being used as the vertical coordinate. If the vertical air velocity is upwards, it is negative when expressed as a tendency of air pressure; downwards is positive.[CF-Standard Name]; unit: Pa s-1

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: 1

surface_downwelling_longwave_flux_in_air [CF-Standard Name]; unit: W m-2

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface latent heat flux is the exchange of heat between the surface and the air on account of evaporation (including sublimation). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 0.01

not filled; unit: 0.01

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface sensible heat flux, also called "turbulent" heat flux, is the exchange of heat between the surface and the air by motion of air. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

surface_snow_area_fraction [CF-Standard Name]; unit: 0.01

"condensed_water" means liquid and ice. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. [CF-Standard Name]; unit: kg m-2

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of

Y. It means the ratio of the mass of Y to the mass of X (including Y). Convective cloud is that produced by the convection schemes in

an atmosphere model. [CF-Standard Name]; unit: 1

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Atmosphere water vapor content is sometimes referred to as "precipitable water", although this term does not imply the water could all be precipitated.[CF-Standard Name]; unit: kg m-2

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: 0.01

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 0.01

Mass Fraction of Convective Cloud Ice [CF-Standard Name]; unit: 1

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: not filled

The specification of a physical process by the phrase due_to_process means that the quantity named is a

single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivati

ve of X with respect to time. "specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air. [CF-Standard Name]; unit: not filled

Model Grid-Cell Area [CF-Standard Name]; unit: m2

relative_humidity [CF-Standard Name]; unit: not filled

moisture_content_of_soil_layer [CF-Standard Name]; unit: not filled

Tendency of Air Temperature due to Moist Convection [CF-Standard Name]; unit: not filled

air_pressure [CF-Standard Name]; unit: not filled

air_pressure [CF-Standard Name]; unit: not filled

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: not filled

sea_level means mean sea level, which is close to the geoid in sea areas. Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL.[CF-Standard Name]; unit: not filled

The surface called "surface" means the lower boundary of the atmosphere. The surface temperature is the (skin) temperature at the interface, not the bulk temperature of the medium above or below. [CF-Standard Name]; unit: not filled

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface sensible heat flux, also called "turbulent" heat flux, is the exchange of heat between the surface and the air by motion of air. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

sea_level means mean sea level, which is close to the geoid in sea areas. Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL.[CF-Standard Name]; unit: Pa

surface_downwelling_longwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

not filled; unit: 0.01

not filled; unit: 1

not filled; unit: 0.01

Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. [CF-Standard Name]; unit: kg m-2

not filled; unit: 1

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

air_pressure_at_cloud_top [CF-Standard Name]; unit: Pa

toa_outgoing_shortwave_flux_assuming_clear_sky [CF-Standard Name]; unit: W m-2

The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

The surface called "surface" means the lower boundary of the atmosphere. The surface temperature is the (skin) temperature at the interface, not the bulk temperature of the medium above or below. [CF-Standard Name]; unit: K

not filled; unit: 1

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: not filled

"moisture" means water in all phases contained in soil. "Content" indicates a quantity per unit area. The "soil content" of a quantity refers to the vertical integral from the surface down to the bottom of the soil model. For the content between specified levels in the soil, standard names including content_of_soil_layer are used. The field capacity of soil is the maximum content of water it can retain against gravitational drainage. [CF-Standard Name]; unit: kg m-2

relative_humidity [CF-Standard Name]; unit: not filled

surface_downwelling_longwave_flux_in_air [CF-Standard Name]; unit: W m-2

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: 1

surface_upwelling_shortwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 0.01

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 0.01

not filled; unit: 0.01

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of Y to the mass of X (including Y). [CF-Standard Name]; unit: 1

not filled; unit: Pa

"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA outgoing shortwave flux is the reflected and scattered solar radiative flux i.e. the "upwelling" TOA shortwave flux, sometimes called the "outgoing shortwave radiation" or "OSR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

surface_downwelling_shortwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. [CF-Standard Name]; unit: 1e-9

relative_humidity [CF-Standard Name]; unit: 0.01

grid scale cloud area fraction. Layer" means any layer with upper and lower boundaries that have constant valu

es in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model

layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary

coordinate variable) as well. "X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occu

pied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". In an atmosphere model, stratiform clou

d is that produced by large-scale convergence (not the convection schemes). [CF-Standard Name]; unit: 0.01

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface latent heat flux is the exchange of heat between the surface and the air on account of evaporation (including sublimation). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

"longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

The surface called "surface" means the lower boundary of the atmosphere. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward eastward" indicates the ZX component of a tensor. A downward eastward stress is a downward flux of eastward momentum, which accelerates the lower medium eastward and the upper medium westward. The surface downward stress is the windstress on the surface. [CF-Standard Name]; unit: Pa

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: not filled

Runoff is the liquid water which drains from land. If not specified, "runoff" refers to the sum of surface runoff and subsurface drainage. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

The surface called "surface" means the lower boundary of the atmosphere. Runoff is the liquid water which drains from land. If not specified, "runoff" refers to the sum of surface runoff and subsurface drainage. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

relative_humidity [CF-Standard Name]; unit: not filled

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: not filled

Tendency of Air Temperature Due to Stratiform Cloud and Precipitation and Boundary Layer Mixing [CF-Standard Name]; unit: not filled

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: not filled

Runoff is the liquid water which drains from land. If not specified, "runoff" refers to the sum of surface runoff and subsurface drainage. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

Tendency of Specific Humidity due to Advection [CF-Standard Name]; unit: not filled

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. "Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock. [CF-Standard Name]; unit: 0.01

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

"Water" means water in all phases. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called "sublimation".) In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

The surface called "surface" means the lower boundary of the atmosphere. The surface temperature is the (skin) temperature at the interface, not the bulk temperature of the medium above or below. [CF-Standard Name]; unit: K

Speed is the magnitude of velocity. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) The wind speed is the magnitude of the wind velocity.[CF-Standard Name]; unit: m s-1

relative_humidity [CF-Standard Name]; unit: 0.01

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 0.01

CALIPSO Scattering Ratio [CF-Standard Name]; unit: 1

not filled; unit: 0.01

surface_snow_amount [CF-Standard Name]; unit: kg m-2

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: 0.01

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 0.01

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: 0.01

ISCCP Mean Cloud Albedo [CF-Standard Name]; unit: 1

"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA incoming shortwave flux is the radiative flux from the sun i.e. the "downwelling" TOA shortwave flux. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 0.01

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: 1

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

Mass Fraction of Stratiform Cloud Liquid Water [CF-Standard Name]; unit: 1

surface_downwelling_shortwave_flux_in_air [CF-Standard Name]; unit: not filled

Precipitation onto Canopy [CF-Standard Name]; unit: not filled

Tendency of Specific Humidity due to Stratiform Cloud Condensation and Evaporation [CF-Standard Name]; unit: not filled

moisture_content_of_soil_layer [CF-Standard Name]; unit: not filled

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: not filled

moisture_content_of_soil_layer [CF-Standard Name]; unit: not filled

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: not filled

Water means water in all phases. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called sublimation.) In accordance with common usage in geophysical disciplines, flux implies per unit area, called flux density in physics. [CF-Standard Name]; unit: not filled

"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA outgoing shortwave flux is the reflected and scattered solar radiative flux i.e. the "upwelling" TOA shortwave flux, sometimes called the "outgoing shortwave radiation" or "OSR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

The surface called "surface" means the lower boundary of the atmosphere. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward eastward" indicates the ZX component of a tensor. A downward eastward stress is a downward flux of eastward momentum, which accelerates the lower medium eastward and the upper medium westward. The surface downward stress is the windstress on the surface. [CF-Standard Name]; unit: Pa

toa_outgoing_shortwave_flux_assuming_clear_sky [CF-Standard Name]; unit: W m-2

The surface called "surface" means the lower boundary of the atmosphere. "Northward" indicates a vector component which is positive when directed northward (negative southward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward northward" indicates the ZY component of a tensor. A downward northward stress is a downward flux of northward momentum, which accelerates the lower medium northward and the upper medium southward. The surface downward stress is the windstress on the surface. [CF-Standard Name]; unit: Pa

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: 0.01

Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface. [CF-Standard Name]; unit: m

surface_downwelling_shortwave_flux_in_air [CF-Standard Name]; unit: W m-2

toa_outgoing_shortwave_flux_assuming_clear_sky [CF-Standard Name]; unit: W m-2

Speed is the magnitude of velocity. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) The wind speed is the magnitude of the wind velocity.[CF-Standard Name]; unit: m s-1

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: 0.01

"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA outgoing shortwave flux is the reflected and scattered solar radiative flux i.e. the "upwelling" TOA shortwave flux, sometimes called the "outgoing shortwave radiation" or "OSR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: 1

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate.

There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate

can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "

X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell.

Cloud area fraction is also called "cloud amount" and "cloud cover". Convective cloud is that produced by the convection schemes in an atmo

sphere model. [CF-Standard Name]; unit: 0.01

Sublimation over Sea Ice [CF-Standard Name]; unit: kg m-2 s-1

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: not filled

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell.[CF-Standard Name]; unit: 0.01

"moisture" means water in all phases contained in soil. "Content" indicates a quantity per unit area. The "soil content" of a quantity refers to the vertical integral from the surface down to the bottom of the soil model. For the content between specified levels in the soil, standard names including content_of_soil_layer are used. [CF-Standard Name]; unit: not filled

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: not filled

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface latent heat flux is the exchange of heat between the surface and the air on account of evaporation (including sublimation). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: not filled

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: not filled

surface_downwelling_longwave_flux_in_air [CF-Standard Name]; unit: not filled

Evaporation from Canopy [CF-Standard Name]; unit: not filled

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: not filled

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: not filled

"longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

surface_downwelling_shortwave_flux_in_air [CF-Standard Name]; unit: W m-2

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface latent heat flux is the exchange of heat between the surface and the air on account of evaporation (including sublimation). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

"condensed_water" means liquid and ice. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. [CF-Standard Name]; unit: kg m-2

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of Y to the mass of X (including Y). [CF-Standard Name]; unit: 1

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 0.01

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 0.01

"Water" means water in all phases. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called "sublimation".) In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface. [CF-Standard Name]; unit: m

surface_snow_amount [CF-Standard Name]; unit: kg m-2

surface_downwelling_shortwave_flux_in_air [CF-Standard Name]; unit: W m-2

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of Y to the mass of X (including Y). [CF-Standard Name]; unit: 1

The surface called "surface" means the lower boundary of the atmosphere.[CF-Standard Name]; unit: Pa

surface_downwelling_longwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: not filled

Tendency of Specific Humidity due to Model Physics [CF-Standard Name]; unit: not filled

Tendency of Air Temperature due to Advection [CF-Standard Name]; unit: not filled

Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface. [CF-Standard Name]; unit: not filled

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: not filled

Depth is the vertical distance below the surface. The root depth is maximum depth of soil reached by plant roots, from which they can extract moisture.[CF-Standard Name]; unit: m

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: not filled

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of Y to the mass of X (including Y). [CF-Standard Name]; unit: not filled

surface_downwelling_shortwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: 0.01

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 0.01

PARASOL Reflectance [CF-Standard Name]; unit: 1

CloudSat Radar Reflectivity CFAD [CF-Standard Name]; unit: 1

eng; USA

CEC5af

ISO 19115

ISO 19115-2:2009