My GeoNetwork catalogue
HD(CP)2 short term observation data of LACROS, HOPE-Melpitz campaign by LACROS
Observation data during HOPE Melpitz of the LACROS facility that was installed at the TROPOS field site of Melpitz, approximately 40 km NE of Leipzig.
Simple
- Date (Publication)
- 2020-02-04
- Edition
-
1
- Citation identifier
- HOPM_LACROS
- Citation identifier
- doi:10.26050/WDCC/HOPM_LACROS
https://www.tropos.de/
https://www.tropos.de/
- Name
-
NetCDF
- Keywords
-
-
Active Remote Sensing
-
- Use limitation
-
CC-BY-4.0: Creative Commons Attribution 4.0 International https://creativecommons.org/licenses/by/4.0/
- Language
-
eng; USA
))
- Begin date
- 2013-09-01
- End date
- 2013-10-21
- Distribution format
-
-
NetCDF
()
-
NetCDF
()
- Transfer size
- 3668
- OnLine resource
- https://www.wdc-climate.de/ui/entry?acronym=HOPM_LACROS
- Hierarchy level
- collection
Non quantitative attribute accuracy
- Name of measure
-
n/a
- Measure description
-
None
- Attribute description
- atmosphere_mass_content_of_water_vapor
- Descriptor
-
atmosphere_mass_content_of_water_vapor [CF-Standard Name]; unit: kg m-2
- Attribute description
- rainfall_rate
- Descriptor
-
rainfall_rate [CF-Standard Name]; unit: m s-1
- Attribute description
- mass_concentration_of_frozen_water_in_air
- Descriptor
-
not filled; unit: kg m-3
- Attribute description
- number_concentration
- Descriptor
-
not filled; unit: log10(m-3 mm-1)
- Attribute description
- absolute_humidity
- Descriptor
-
not filled; unit: kg m-3
- Attribute description
- air_temperature
- Descriptor
-
Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K
- Attribute description
- atmosphere_mass_content_of_cloud_liquid_water
- Descriptor
-
"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. [CF-Standard Name]; unit: kg m-2
- Attribute description
- equivalent_reflectivity_factor
- Descriptor
-
"Equivalent reflectivity factor" is the radar reflectivity factor that is calculated from the measured radar return power assuming the target is composed of liquid water droplets whose diameter is less than one tenth of the radar wavelength, i.e., treating the droplets as Rayleigh scatterers. The actual radar reflectivity factor would depend on the size distribution and composition of the particles within the target volume and these are often unknown. [CF-Standard Name]; unit: not filled
- File identifier
- wdc-climate.de:3758154 XML
- Metadata language
-
eng; USA
- Hierarchy level
- collection
- Hierarchy level name
-
HOPM_LACROS
- Date stamp
- 2018-10-01T13:59:51
- Metadata standard name
-
ISO 19115
- Metadata standard version
-
ISO 19115-2:2009
Overviews
Spatial extent
Provided by
