1

NetCDF

CC-BY-4.0: Creative Commons Attribution 4.0 International https://creativecommons.org/licenses/by/4.0/

eng; USA

sea_water_salinity [CF-Standard Name]; unit: 0.001

Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL. Air pressure is the force per unit area which would be exerted when the moving gas molecules of which the air is composed strike a theoretical surface of any orientation. "Mean sea level" means the time mean of sea surface elevation at a given location over an arbitrary period sufficient to eliminate the tidal signals. [CF-Standard Name]; unit: Pa

A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

surface_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon [CF-Standard Name]; unit: kg m-2 s-1

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

The surface called "surface" means the lower boundary of the atmosphere. The surface temperature is the (skin) temperature at the interface, not the bulk temperature of the medium above or below. [CF-Standard Name]; unit: K

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. [CF-Standard Name]; unit: mol mol-1

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. [CF-Standard Name]; unit: mol mol-1

"longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

Global Average Thermosteric Sea Level Change [CF-Standard Name]; unit: m

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: 0.01

surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes [CF-Standard Name]; unit: kg m-2 s-1

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

The unit of salinity is PSU, which is dimensionless. The units attribute should be given as 1e-3 or 0.001 i.e. parts per thousand if salinity is in PSU. Sea surface salinity is often abbreviated as "SSS". For the salinity of sea water at a particular depth or layer, a data variable of sea_water_salinity with a vertical coordinate axis should be used. [CF-Standard Name]; unit: 0.001

Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface. [CF-Standard Name]; unit: m

The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

surface_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon [CF-Standard Name]; unit: kg m-2 s-1

sea_water_potential_temperature [CF-Standard Name]; unit: degC

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

surface_downward_heat_flux_in_sea_water [CF-Standard Name]; unit: W m-2

Carbon Mass Flux out of Atmosphere Due to Gross Primary Production on Land

Comment: The rate of synthesis of biomass from inorganic precursors by autotrophs ('producers') expressed as the mass of carbon which it contains. For example, photosynthesis in plants or phytoplankton. The producers also respire some of this biomass and the difference is referred to as the net primary production.

Used for mip era 'CMIP6' in CMOR MIP table(s): Table E3hr; Table Lmon, provided in frequency(s): 3hr; mon, and for Realm(s): land.

Codelist created on 2019-02-01 from https://github.com/PCMDI/cmip6-cmor-tables (CMOR Version=3.4; table_date(s):14 December 2018) [CF-Standard Name]; unit: kg m-2 s-1

atmosphere_mass_content_of_water_vapor [CF-Standard Name]; unit: kg m-2

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

toa_outgoing_shortwave_flux_assuming_clear_sky [CF-Standard Name]; unit: W m-2

"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA outgoing shortwave flux is the reflected and scattered solar radiative flux i.e. the "upwelling" TOA shortwave flux, sometimes called the "outgoing shortwave radiation" or "OSR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

Sea surface temperature is usually abbreviated as "SST". It is the temperature of sea water near the surface (including the part under sea-ice, if any), and not the skin temperature, whose standard name is surface_temperature. For the temperature of sea water at a particular depth or layer, a data variable of sea_water_temperature with a vertical coordinate axis should be used. [CF-Standard Name]; unit: degC

"X_area" means the horizontal area occupied by X within the grid cell.[CF-Standard Name]; unit: 1

surface_snow_amount [CF-Standard Name]; unit: kg m-2

surface_downwelling_shortwave_flux_in_air [CF-Standard Name]; unit: W m-2

The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

surface_downwelling_longwave_flux_in_air [CF-Standard Name]; unit: W m-2

surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes [CF-Standard Name]; unit: kg m-2 s-1

eng; USA

C6CMICECE1

ISO 19115

ISO 19115-2:2009