IPCC DDC: MPI-M MPIESM1.2-HR model output prepared for CMIP6 HighResMIP
These data include the subset used by IPCC AR6 WGI authors of the datasets originally published in ESGF for 'CMIP6.HighResMIP.MPI-M.MPI-ESM1-2-HR' with the full Data Reference Syntax following the template 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The MPI-ESM1.2-HR climate model, released in 2017, includes the following components: aerosol: none, prescribed MACv2-SP, atmos: ECHAM6.3 (spectral T127; 384 x 192 longitude/latitude; 95 levels; top level 0.01 hPa), land: JSBACH3.20, landIce: none/prescribed, ocean: MPIOM1.63 (tripolar TP04, approximately 0.4deg; 802 x 404 longitude/latitude; 40 levels; top grid cell 0-12 m), ocnBgchem: HAMOCC6, seaIce: unnamed (thermodynamic (Semtner zero-layer) dynamic (Hibler 79) sea ice model). The model was run by the Max Planck Institute for Meteorology, Hamburg 20146, Germany (MPI-M) in native nominal resolutions: aerosol: 100 km, atmos: 100 km, land: 100 km, landIce: none, ocean: 50 km, ocnBgchem: 50 km, seaIce: 50 km.
Simple
- Date (Publication)
- 2023-08-21
- Edition
-
1
- Citation identifier
- C6HRMXME2
- Citation identifier
- doi:10.26050/WDCC/AR6.C6HRMXME2
http://www.mpimet.mpg.de/
http://www.mpimet.mpg.de/
http://www.mpimet.mpg.de/
http://www.mpimet.mpg.de/
http://www.mpimet.mpg.de/
http://www.mpimet.mpg.de/
http://www.mpimet.mpg.de/
http://www.mpimet.mpg.de/
http://www.mpimet.mpg.de/
not filled
http://www.mpimet.mpg.de/
http://www.mpimet.mpg.de/
http://www.mpimet.mpg.de/
http://www.mpimet.mpg.de/
http://www.mpimet.mpg.de/
http://www.mpimet.mpg.de/
- Name
-
NetCDF
- Keywords
-
-
CMIP6
-
- Keywords
-
-
HighResMIP
-
- Keywords
-
-
IPCC
-
- Keywords
-
-
IPCC-AR6
-
- Keywords
-
-
IPCC-DDC
-
- Keywords
-
-
MPI-ESM1-2-HR
-
- Keywords
-
-
MPI-M
-
- Keywords
-
-
climate change
-
- Keywords
-
-
model-output
-
- Use limitation
-
CC-BY-4.0: Creative Commons Attribution 4.0 International https://creativecommons.org/licenses/by/4.0/
- Language
-
eng; USA
- Begin date
- 1950-01-01
- End date
- 2050-12-31
- Distribution format
-
-
NetCDF
()
-
NetCDF
()
- Transfer size
- 43167
- OnLine resource
- https://www.wdc-climate.de/ui/entry?acronym=C6HRMXME2
- Hierarchy level
- collection
- Attribute description
- sea_surface_temperature
- Descriptor
-
Sea surface temperature is usually abbreviated as "SST". It is the temperature of sea water near the surface (including the part under sea-ice, if any), and not the skin temperature, whose standard name is surface_temperature. For the temperature of sea water at a particular depth or layer, a data variable of sea_water_temperature with a vertical coordinate axis should be used. [CF-Standard Name]; unit: degC
- Attribute description
- northward_wind
- Descriptor
-
"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1
- Attribute description
- geopotential_height
- Descriptor
-
Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface. [CF-Standard Name]; unit: m
- Attribute description
- air_temperature
- Descriptor
-
Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K
- Attribute description
- surface_snow_amount
- Descriptor
-
surface_snow_amount [CF-Standard Name]; unit: kg m-2
- Attribute description
- atmosphere_mass_content_of_water_vapor
- Descriptor
-
atmosphere_mass_content_of_water_vapor [CF-Standard Name]; unit: kg m-2
- Attribute description
- surface_upwelling_longwave_flux_in_air
- Descriptor
-
The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2
- Attribute description
- surface_snow_amount
- Descriptor
-
surface_snow_amount [CF-Standard Name]; unit: kg m-2
- Attribute description
- air_temperature
- Descriptor
-
Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K
- Attribute description
- air_temperature
- Descriptor
-
Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K
- Attribute description
- air_temperature
- Descriptor
-
Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K
- Attribute description
- eastward_wind
- Descriptor
-
"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1
- Attribute description
- surface_downwelling_shortwave_flux_in_air
- Descriptor
-
surface_downwelling_shortwave_flux_in_air [CF-Standard Name]; unit: W m-2
- Attribute description
- atmosphere_mass_content_of_water_vapor
- Descriptor
-
atmosphere_mass_content_of_water_vapor [CF-Standard Name]; unit: kg m-2
- Attribute description
- geopotential_height
- Descriptor
-
Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface. [CF-Standard Name]; unit: m
- Attribute description
- air_temperature
- Descriptor
-
Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K
- Attribute description
- sea_surface_temperature
- Descriptor
-
Sea surface temperature is usually abbreviated as "SST". It is the temperature of sea water near the surface (including the part under sea-ice, if any), and not the skin temperature, whose standard name is surface_temperature. For the temperature of sea water at a particular depth or layer, a data variable of sea_water_temperature with a vertical coordinate axis should be used. [CF-Standard Name]; unit: degC
- Attribute description
- sea_ice_area_fraction
- Descriptor
-
sea_ice_area_fraction [CF-Standard Name]; unit: 0.01
- Attribute description
- toa_outgoing_shortwave_flux
- Descriptor
-
"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA outgoing shortwave flux is the reflected and scattered solar radiative flux i.e. the "upwelling" TOA shortwave flux, sometimes called the "outgoing shortwave radiation" or "OSR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2
- Attribute description
- northward_wind
- Descriptor
-
"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1
- Attribute description
- surface_upwelling_longwave_flux_in_air
- Descriptor
-
The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2
- Attribute description
- air_pressure_at_mean_sea_level
- Descriptor
-
Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL. Air pressure is the force per unit area which would be exerted when the moving gas molecules of which the air is composed strike a theoretical surface of any orientation. "Mean sea level" means the time mean of sea surface elevation at a given location over an arbitrary period sufficient to eliminate the tidal signals. [CF-Standard Name]; unit: Pa
- Attribute description
- toa_outgoing_shortwave_flux_assuming_clear_sky
- Descriptor
-
toa_outgoing_shortwave_flux_assuming_clear_sky [CF-Standard Name]; unit: W m-2
- Attribute description
- eastward_wind
- Descriptor
-
"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1
- Attribute description
- air_temperature
- Descriptor
-
Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K
- Attribute description
- surface_temperature
- Descriptor
-
The surface called "surface" means the lower boundary of the atmosphere. The surface temperature is the (skin) temperature at the interface, not the bulk temperature of the medium above or below. [CF-Standard Name]; unit: K
- Attribute description
- toa_outgoing_shortwave_flux_assuming_clear_sky
- Descriptor
-
toa_outgoing_shortwave_flux_assuming_clear_sky [CF-Standard Name]; unit: W m-2
- Attribute description
- global_average_thermosteric_sea_level_change
- Descriptor
-
Global Average Thermosteric Sea Level Change [CF-Standard Name]; unit: m
- Attribute description
- precipitation_flux
- Descriptor
-
In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1
- Attribute description
- air_pressure_at_mean_sea_level
- Descriptor
-
Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL. Air pressure is the force per unit area which would be exerted when the moving gas molecules of which the air is composed strike a theoretical surface of any orientation. "Mean sea level" means the time mean of sea surface elevation at a given location over an arbitrary period sufficient to eliminate the tidal signals. [CF-Standard Name]; unit: Pa
- Attribute description
- surface_upwelling_shortwave_flux_in_air
- Descriptor
-
The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2
- Attribute description
- surface_temperature
- Descriptor
-
The surface called "surface" means the lower boundary of the atmosphere. The surface temperature is the (skin) temperature at the interface, not the bulk temperature of the medium above or below. [CF-Standard Name]; unit: K
- Attribute description
- surface_upwelling_shortwave_flux_in_air
- Descriptor
-
The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2
- Attribute description
- surface_downwelling_shortwave_flux_in_air
- Descriptor
-
surface_downwelling_shortwave_flux_in_air [CF-Standard Name]; unit: W m-2
- Attribute description
- sea_ice_area_fraction
- Descriptor
-
sea_ice_area_fraction [CF-Standard Name]; unit: 0.01
- Attribute description
- toa_outgoing_shortwave_flux
- Descriptor
-
"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA outgoing shortwave flux is the reflected and scattered solar radiative flux i.e. the "upwelling" TOA shortwave flux, sometimes called the "outgoing shortwave radiation" or "OSR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2
- Attribute description
- global_average_thermosteric_sea_level_change
- Descriptor
-
Global Average Thermosteric Sea Level Change [CF-Standard Name]; unit: m
- Attribute description
- precipitation_flux
- Descriptor
-
In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1
- Attribute description
- geopotential_height
- Descriptor
-
Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface. [CF-Standard Name]; unit: m
- File identifier
- wdc-climate.de:3929378 XML
- Metadata language
-
eng; USA
- Hierarchy level
- collection
- Hierarchy level name
-
C6HRMXME2
- Date stamp
- 2018-06-06T00:00:00
- Metadata standard name
-
ISO 19115
- Metadata standard version
-
ISO 19115-2:2009
http://www.mpimet.mpg.de/
http://www.mpimet.mpg.de/
http://www.mpimet.mpg.de/
http://www.mpimet.mpg.de/
http://www.mpimet.mpg.de/
http://www.mpimet.mpg.de/
http://www.mpimet.mpg.de/
http://www.mpimet.mpg.de/
http://www.mpimet.mpg.de/
not filled
http://www.mpimet.mpg.de/
http://www.mpimet.mpg.de/
http://www.mpimet.mpg.de/
http://www.mpimet.mpg.de/
Overviews
Spatial extent
Provided by
My GeoNetwork catalogue