IPCC DDC: MIROC MIROC6 model output prepared for CMIP6 DAMIP hist-sol
These data include the subset used by IPCC AR6 WGI authors of the datasets originally published in ESGF for 'CMIP6.DAMIP.MIROC.MIROC6.hist-sol' with the full Data Reference Syntax following the template 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The MIROC6 climate model, released in 2017, includes the following components: aerosol: SPRINTARS6.0, atmos: CCSR AGCM (T85; 256 x 128 longitude/latitude; 81 levels; top level 0.004 hPa), land: MATSIRO6.0, ocean: COCO4.9 (tripolar primarily 1deg; 360 x 256 longitude/latitude; 63 levels; top grid cell 0-2 m), seaIce: COCO4.9. The model was run by the JAMSTEC (Japan Agency for Marine-Earth Science and Technology, Kanagawa 236-0001, Japan), AORI (Atmosphere and Ocean Research Institute, The University of Tokyo, Chiba 277-8564, Japan), NIES (National Institute for Environmental Studies, Ibaraki 305-8506, Japan), and R-CCS (RIKEN Center for Computational Science, Hyogo 650-0047, Japan) (MIROC) in native nominal resolutions: aerosol: 250 km, atmos: 250 km, land: 250 km, ocean: 100 km, seaIce: 100 km.
Simple
- Date (Publication)
- 2023-08-15
- Edition
-
1
- Citation identifier
- C6DAMIMIHS
- Citation identifier
- doi:10.26050/WDCC/AR6.C6DAMIMIHS
http://www.nies.go.jp/index-e.html
http://www.nies.go.jp/index-e.html
- Name
-
NetCDF
- Keywords
-
-
CMIP6
-
- Keywords
-
-
DAMIP
-
- Keywords
-
-
IPCC
-
- Keywords
-
-
IPCC-AR6
-
- Keywords
-
-
IPCC-DDC
-
- Keywords
-
-
MIROC
-
- Keywords
-
-
MIROC6
-
- Keywords
-
-
climate change
-
- Keywords
-
-
hist-sol
-
- Keywords
-
-
model-output
-
- Use limitation
-
CC-BY-4.0: Creative Commons Attribution 4.0 International https://creativecommons.org/licenses/by/4.0/
- Language
-
eng; USA
- Begin date
- 1850-01-16
- End date
- 2020-12-16
- Distribution format
-
-
NetCDF
()
-
NetCDF
()
- Transfer size
- 144585
- OnLine resource
- https://www.wdc-climate.de/ui/entry?acronym=C6DAMIMIHS
- Hierarchy level
- collection
- Attribute description
- air_temperature
- Descriptor
-
Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K
- Attribute description
- sea_surface_salinity
- Descriptor
-
The unit of salinity is PSU, which is dimensionless. The units attribute should be given as 1e-3 or 0.001 i.e. parts per thousand if salinity is in PSU. Sea surface salinity is often abbreviated as "SSS". For the salinity of sea water at a particular depth or layer, a data variable of sea_water_salinity with a vertical coordinate axis should be used. [CF-Standard Name]; unit: 0.001
- Attribute description
- sea_water_potential_temperature
- Descriptor
-
sea_water_potential_temperature [CF-Standard Name]; unit: degC
- Attribute description
- surface_downwelling_shortwave_flux_in_air
- Descriptor
-
surface_downwelling_shortwave_flux_in_air [CF-Standard Name]; unit: W m-2
- Attribute description
- toa_outgoing_longwave_flux_assuming_clear_sky
- Descriptor
-
A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2
- Attribute description
- cloud_area_fraction
- Descriptor
-
"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: 0.01
- Attribute description
- surface_snow_amount
- Descriptor
-
surface_snow_amount [CF-Standard Name]; unit: kg m-2
- Attribute description
- surface_downwelling_longwave_flux_in_air
- Descriptor
-
surface_downwelling_longwave_flux_in_air [CF-Standard Name]; unit: W m-2
- Attribute description
- precipitation_flux
- Descriptor
-
In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1
- Attribute description
- sea_water_salinity
- Descriptor
-
sea_water_salinity [CF-Standard Name]; unit: 0.001
- Attribute description
- toa_outgoing_shortwave_flux_assuming_clear_sky
- Descriptor
-
toa_outgoing_shortwave_flux_assuming_clear_sky [CF-Standard Name]; unit: W m-2
- Attribute description
- geopotential_height
- Descriptor
-
Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface. [CF-Standard Name]; unit: m
- Attribute description
- atmosphere_mass_content_of_water_vapor
- Descriptor
-
atmosphere_mass_content_of_water_vapor [CF-Standard Name]; unit: kg m-2
- Attribute description
- air_temperature
- Descriptor
-
Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K
- Attribute description
- sea_surface_temperature
- Descriptor
-
Sea surface temperature is usually abbreviated as "SST". It is the temperature of sea water near the surface (including the part under sea-ice, if any), and not the skin temperature, whose standard name is surface_temperature. For the temperature of sea water at a particular depth or layer, a data variable of sea_water_temperature with a vertical coordinate axis should be used. [CF-Standard Name]; unit: degC
- Attribute description
- surface_upwelling_shortwave_flux_in_air
- Descriptor
-
The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2
- Attribute description
- eastward_wind
- Descriptor
-
"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1
- Attribute description
- air_temperature
- Descriptor
-
Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K
- Attribute description
- surface_upwelling_longwave_flux_in_air
- Descriptor
-
The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2
- Attribute description
- toa_outgoing_longwave_flux
- Descriptor
-
"longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2
- Attribute description
- air_pressure_at_mean_sea_level
- Descriptor
-
Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL. Air pressure is the force per unit area which would be exerted when the moving gas molecules of which the air is composed strike a theoretical surface of any orientation. "Mean sea level" means the time mean of sea surface elevation at a given location over an arbitrary period sufficient to eliminate the tidal signals. [CF-Standard Name]; unit: Pa
- Attribute description
- surface_temperature
- Descriptor
-
The surface called "surface" means the lower boundary of the atmosphere. The surface temperature is the (skin) temperature at the interface, not the bulk temperature of the medium above or below. [CF-Standard Name]; unit: K
- Attribute description
- northward_wind
- Descriptor
-
"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1
- Attribute description
- sea_ice_area_fraction
- Descriptor
-
sea_ice_area_fraction [CF-Standard Name]; unit: 0.01
- Attribute description
- toa_outgoing_shortwave_flux
- Descriptor
-
"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA outgoing shortwave flux is the reflected and scattered solar radiative flux i.e. the "upwelling" TOA shortwave flux, sometimes called the "outgoing shortwave radiation" or "OSR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2
- File identifier
- wdc-climate.de:3938957 XML
- Metadata language
-
eng; USA
- Hierarchy level
- collection
- Hierarchy level name
-
C6DAMIMIHS
- Date stamp
- 2026-02-04T10:21:32
- Metadata standard name
-
ISO 19115
- Metadata standard version
-
ISO 19115-2:2009
Overviews
Spatial extent
Provided by
My GeoNetwork catalogue