My GeoNetwork catalogue
IPCC DDC: NCC NorESM2-LM model output prepared for CMIP6 CMIP esm-hist
These data include the subset used by IPCC AR6 WGI authors of the datasets originally published in ESGF for 'CMIP6.CMIP.NCC.NorESM2-LM.esm-hist' with the full Data Reference Syntax following the template 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The NorESM2-LM (low atmosphere-medium ocean resolution, GHG concentration driven) climate model, released in 2017, includes the following components: aerosol: OsloAero, atmos: CAM-OSLO (2 degree resolution; 144 x 96; 32 levels; top level 3 mb), atmosChem: OsloChemSimp, land: CLM, landIce: CISM, ocean: MICOM (1 degree resolution; 360 x 384; 70 levels; top grid cell minimum 0-2.5 m [native model uses hybrid density and generic upper-layer coordinate interpolated to z-level for contributed data]), ocnBgchem: HAMOCC, seaIce: CICE. The model was run by the NorESM Climate modeling Consortium consisting of CICERO (Center for International Climate and Environmental Research, Oslo 0349), MET-Norway (Norwegian Meteorological Institute, Oslo 0313), NERSC (Nansen Environmental and Remote Sensing Center, Bergen 5006), NILU (Norwegian Institute for Air Research, Kjeller 2027), UiB (University of Bergen, Bergen 5007), UiO (University of Oslo, Oslo 0313) and UNI (Uni Research, Bergen 5008), Norway. Mailing address: NCC, c/o MET-Norway, Henrik Mohns plass 1, Oslo 0313, Norway (NCC) in native nominal resolutions: aerosol: 250 km, atmos: 250 km, atmosChem: 250 km, land: 250 km, landIce: 250 km, ocean: 100 km, ocnBgchem: 100 km, seaIce: 100 km.
Simple
- Date (Publication)
- 2023-07-31
- Edition
-
1
- Citation identifier
- C6CMNCCNLEH
- Citation identifier
- doi:10.26050/WDCC/AR6.C6CMNCCNLEH
- Name
-
NetCDF
- Keywords
-
-
CMIP
-
- Keywords
-
-
CMIP6
-
- Keywords
-
-
IPCC
-
- Keywords
-
-
IPCC-AR6
-
- Keywords
-
-
IPCC-DDC
-
- Keywords
-
-
NCC
-
- Keywords
-
-
NorESM2-LM
-
- Keywords
-
-
climate change
-
- Keywords
-
-
esm-hist
-
- Keywords
-
-
model-output
-
- Use limitation
-
CC-BY-4.0: Creative Commons Attribution 4.0 International https://creativecommons.org/licenses/by/4.0/
- Language
-
eng; USA
))
- Begin date
- 1850-01-16
- End date
- 2014-12-16
- Distribution format
-
-
NetCDF
()
-
NetCDF
()
- Transfer size
- 26194
- OnLine resource
- https://www.wdc-climate.de/ui/entry?acronym=C6CMNCCNLEH
- Hierarchy level
- collection
- Attribute description
- air_pressure_at_mean_sea_level
- Descriptor
-
Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL. Air pressure is the force per unit area which would be exerted when the moving gas molecules of which the air is composed strike a theoretical surface of any orientation. "Mean sea level" means the time mean of sea surface elevation at a given location over an arbitrary period sufficient to eliminate the tidal signals. [CF-Standard Name]; unit: Pa
- Attribute description
- sea_ice_area_fraction
- Descriptor
-
sea_ice_area_fraction [CF-Standard Name]; unit: 0.01
- Attribute description
- mole_fraction_of_carbon_dioxide_in_air
- Descriptor
-
Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. [CF-Standard Name]; unit: mol mol-1
- Attribute description
- surface_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon
- Descriptor
-
surface_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon [CF-Standard Name]; unit: kg m-2 s-1
- Attribute description
- surface_temperature
- Descriptor
-
The surface called "surface" means the lower boundary of the atmosphere. The surface temperature is the (skin) temperature at the interface, not the bulk temperature of the medium above or below. [CF-Standard Name]; unit: K
- Attribute description
- global_average_thermosteric_sea_level_change
- Descriptor
-
Global Average Thermosteric Sea Level Change [CF-Standard Name]; unit: m
- Attribute description
- air_temperature
- Descriptor
-
Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K
- Attribute description
- surface_snow_amount
- Descriptor
-
surface_snow_amount [CF-Standard Name]; unit: kg m-2
- Attribute description
- air_temperature
- Descriptor
-
Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K
- Attribute description
- surface_downward_heat_flux_in_sea_water
- Descriptor
-
surface_downward_heat_flux_in_sea_water [CF-Standard Name]; unit: W m-2
- Attribute description
- atmosphere_mass_content_of_water_vapor
- Descriptor
-
atmosphere_mass_content_of_water_vapor [CF-Standard Name]; unit: kg m-2
- Attribute description
- gross_primary_productivity_of_biomass_expressed_as_carbon
- Descriptor
-
Carbon Mass Flux out of Atmosphere Due to Gross Primary Production on Land
Comment: The rate of synthesis of biomass from inorganic precursors by autotrophs ('producers') expressed as the mass of carbon which it contains. For example, photosynthesis in plants or phytoplankton. The producers also respire some of this biomass and the difference is referred to as the net primary production.
Used for mip era 'CMIP6' in CMOR MIP table(s): Table E3hr; Table Lmon, provided in frequency(s): 3hr; mon, and for Realm(s): land.
Codelist created on 2019-02-01 from https://github.com/PCMDI/cmip6-cmor-tables (CMOR Version=3.4; table_date(s):14 December 2018) [CF-Standard Name]; unit: kg m-2 s-1
- Attribute description
- ocean_volume
- Descriptor
-
Ocean Grid-Cell Volume [CF-Standard Name]; unit: m3
- Attribute description
- surface_air_pressure
- Descriptor
-
The surface called "surface" means the lower boundary of the atmosphere.[CF-Standard Name]; unit: Pa
- Attribute description
- sea_surface_temperature
- Descriptor
-
Sea surface temperature is usually abbreviated as "SST". It is the temperature of sea water near the surface (including the part under sea-ice, if any), and not the skin temperature, whose standard name is surface_temperature. For the temperature of sea water at a particular depth or layer, a data variable of sea_water_temperature with a vertical coordinate axis should be used. [CF-Standard Name]; unit: degC
- Attribute description
- surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes
- Descriptor
-
surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes [CF-Standard Name]; unit: kg m-2 s-1
- Attribute description
- leaf_area_index
- Descriptor
-
"X_area" means the horizontal area occupied by X within the grid cell.[CF-Standard Name]; unit: 1
- File identifier
- wdc-climate.de:3957084 XML
- Metadata language
-
eng; USA
- Hierarchy level
- collection
- Hierarchy level name
-
C6CMNCCNLEH
- Date stamp
- 2020-02-18T00:00:00
- Metadata standard name
-
ISO 19115
- Metadata standard version
-
ISO 19115-2:2009
Overviews
Spatial extent
Provided by
