My GeoNetwork catalogue
IPCC-DDC_CSIRO_SRES_A1FI: 140 YEARS MONTHLY MEANS Commenwealth Scientific and Industrial Research Organisation Australia
The SRES data sets were published by the IPCC in 2000 and classified
into four different scenario families (A1, A2, B1, B2).
SRES_A1 storyline describes a future world of very rapid economic
growth, global population that peaks in mid-century and declines
thereafter and the rapid introduction of new and more efficient
technologies.
It is distinguished by their technological emphasis:
A1FI: fossil intensiv,
A1T : non-fossil energy sources and
A1B : a balance across all sources.
The Mark 2 CSIRO coupled global climate model consists of the
atmospheric component which has 9 vertical levels with a R21
horizontal resolution and the ocean component which was based
on the GFDL code.
Mark2_CSIRO ( http://www.cmar.csiro.au/e-print/open/hennessy_1998a.html#ccm )
The changes of anthropogenic emissions of CO2, CH4, N2O and
sulphur dioxide are prescribed according to the above
mentioned scenario.
Simple
- Date (Publication)
- 2005-02-20
- Edition
-
1
- Citation identifier
- CSIRO_SRES_A1FI
- Citation identifier
- doi:10.1594/WDCC/CSIRO_SRES_A1FI
http://www.dar.csiro.au/
http://www.dar.csiro.au/
http://www.dar.csiro.au/
- Name
-
GRIB
- Keywords
-
-
CSIRO
-
- Keywords
-
-
CSIRO-Mk2
-
- Keywords
-
-
IPCC-DDC
-
- Keywords
-
-
IPCC-TAR
-
- Keywords
-
-
SRES-A1FI
-
- Keywords
-
-
SRES_A1
-
- Keywords
-
-
WGI
-
- Keywords
-
-
climate simulation
-
- Use limitation
-
unrestricted: unrestricted
- Language
-
eng; USA
))
- Begin date
- 1961-01-01
- End date
- 2100-12-31
- Distribution format
-
-
GRIB
()
-
GRIB
()
- Transfer size
- 280
- OnLine resource
- https://www.wdc-climate.de/ui/entry?acronym=CSIRO_SRES_A1FI
- Hierarchy level
- collection
Non quantitative attribute accuracy
- Name of measure
-
n/a
- Measure description
-
None
Conceptual consistency
- Name of measure
-
n/a
- Measure description
-
None
- Attribute description
- surface_downwelling_shortwave_flux_in_air
- Descriptor
-
surface_downwelling_shortwave_flux_in_air [CF-Standard Name]; unit: W m-2
- Attribute description
- air_pressure_at_sea_level
- Descriptor
-
sea_level means mean sea level, which is close to the geoid in sea areas. Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL.[CF-Standard Name]; unit: Pa
- Attribute description
- y_wind
- Descriptor
-
"y" indicates a vector component along the grid y-axis, when this is not true latitude, positive with increasing y. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)[CF-Standard Name]; unit: m s-1
- Attribute description
- air_temperature-atNearSurface (maximum)
- Descriptor
-
Air temperature is the bulk temperature of the air, not the surface (skin) temperature. (maximum) [CF-Standard Name-vertical_coordinate-cell_method]; unit: K
- Attribute description
- air_temperature-atNearSurface (minimum)
- Descriptor
-
Air temperature is the bulk temperature of the air, not the surface (skin) temperature. (minimum) [CF-Standard Name-vertical_coordinate-cell_method]; unit: K
- Attribute description
- surface_temperature
- Descriptor
-
The surface called "surface" means the lower boundary of the atmosphere. The surface temperature is the (skin) temperature at the interface, not the bulk temperature of the medium above or below. [CF-Standard Name]; unit: K
- Attribute description
- air_temperature
- Descriptor
-
Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K
- Attribute description
- wind_speed-at10m
- Descriptor
-
Speed is the magnitude of velocity. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) The wind speed is the magnitude of the wind velocity. [CF-Standard Name-vertical_coordinate]; unit: m s-1
- Attribute description
- snowfall_amount
- Descriptor
-
snowfall_amount [CF-Standard Name]; unit: kg m-2
- Attribute description
- specific_humidity-atPressureLevel
- Descriptor
-
specific_humidity-atPressureLevel [CF-Standard Name-vertical_coordinate]; unit: kg kg-1
- Attribute description
- air_temperature-atNearSurface
- Descriptor
-
Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name-vertical_coordinate]; unit: K
- Attribute description
- x_wind
- Descriptor
-
"x" indicates a vector component along the grid x-axis, when this is not true longitude, positive with increasing x. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.)[CF-Standard Name]; unit: m s-1
- Attribute description
- lwe_convective_precipitation_rate
- Descriptor
-
"lwe" means liquid water equivalent. [CF-Standard Name]; unit: mm d-1
- Attribute description
- convective_precipitation_rate
- Descriptor
-
"Precipitation rate" means the depth or thickness of the layer formed by precipitation per unit time. Convective precipitation is that produced by the convection schemes in an atmosphere model. "Precipitation" in the earth's atmosphere means precipitation of water in all phases. [CF-Standard Name]; unit: mm d-1
- Attribute description
- soil_moisture_content
- Descriptor
-
"moisture" means water in all phases contained in soil. "Content" indicates a quantity per unit area. The "soil content" of a quantity refers to the vertical integral from the surface down to the bottom of the soil model. For the content between specified levels in the soil, standard names including content_of_soil_layer are used. [CF-Standard Name]; unit: m
- File identifier
- wdc-climate.de:2000159 XML
- Metadata language
-
eng; USA
- Hierarchy level
- collection
- Hierarchy level name
-
CSIRO_SRES_A1FI
- Date stamp
- 2003-11-01T00:00:00
- Metadata standard name
-
ISO 19115
- Metadata standard version
-
ISO 19115-2:2009
Overviews
Spatial extent
Provided by
