IPCC-DDC_HADCM3_SRES_B2: 150 YEARS MONTHLY MEANS Hadley Centre for Climate Prediction and Research - UK Met Office
The SRES data sets were published by the IPCC in 2000 and classified
into four different scenario families (A1, A2, B1, B2).
SRES_B2 storyline describes a world in which the emphasis is on
local solutions to economic, social and enviromental sustainability.
The global population is increasing at a lower rate than A2. It has
an intermediate level of economic development and a less rapid and
more diverse technological change than in A1 and B1.
The Hadley Centre Circulation Model is a 3-dim AOGCM described
by (Gordon et al.,2000 and Pope et al.,2000).
The atmospheric component has a 19 levels horizontal resolution,
comparable with spectral resolution of T42, while the ocean
component has a 20 levels resolution.
HADCM3 ( http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadcm 3 ).
The changes of anthropogenic emissions of CO2, CH4, N2O and sulphur
dioxide are prescribed according to the above mentioned scenario.
Simple
- Date (Publication)
- 2004-08-03
- Edition
-
1
- Citation identifier
- HADCM3_SRES_B2
- Citation identifier
- doi:10.1594/WDCC/HADCM3_SRES_B2
http://www.meto.gov.uk/sec5/sec5pg1.html
http://www.meto.gov.uk/sec5/sec5pg1.html
http://www.meto.gov.uk/sec5/sec5pg1.html
- Name
-
GRIB
- Keywords
-
-
HadCM3
-
- Keywords
-
-
Hadley-Centre
-
- Keywords
-
-
IPCC-DDC
-
- Keywords
-
-
IPCC-TAR
-
- Keywords
-
-
SRES-B2
-
- Keywords
-
-
SRES_B2
-
- Keywords
-
-
UKMO
-
- Keywords
-
-
WGI
-
- Use limitation
-
unrestricted: unrestricted
- Language
-
eng; USA
- Begin date
- 1950-01-01
- End date
- 2100-01-01
- Distribution format
-
-
GRIB
()
-
GRIB
()
- Transfer size
- 482
- OnLine resource
- https://www.wdc-climate.de/ui/entry?acronym=HADCM3_SRES_B2
- Hierarchy level
- collection
- Attribute description
- air_temperature
- Descriptor
-
Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K
- Attribute description
- air_pressure_at_sea_level
- Descriptor
-
sea_level means mean sea level, which is close to the geoid in sea areas. Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL.[CF-Standard Name]; unit: Pa
- Attribute description
- wind_speed-atNearSurface
- Descriptor
-
wind_speed-atNearSurface [CF-Standard Name-vertical_coordinate]; unit: m s-1
- Attribute description
- relative_humidity-atPressureLevel
- Descriptor
-
relative_humidity-atPressureLevel [CF-Standard Name-vertical_coordinate]; unit: 0.01
- Attribute description
- relative_humidity-atNearSurface
- Descriptor
-
relative_humidity-atNearSurface [CF-Standard Name-vertical_coordinate]; unit: 0.01
- Attribute description
- air_temperature-atNearSurface (minimum)
- Descriptor
-
Air temperature is the bulk temperature of the air, not the surface (skin) temperature. (minimum) [CF-Standard Name-vertical_coordinate-cell_method]; unit: K
- Attribute description
- geopotential_height
- Descriptor
-
Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface. [CF-Standard Name]; unit: gpm
- Attribute description
- surface_downwelling_shortwave_flux_in_air
- Descriptor
-
surface_downwelling_shortwave_flux_in_air [CF-Standard Name]; unit: W m-2
- Attribute description
- soil_moisture_content
- Descriptor
-
"moisture" means water in all phases contained in soil. "Content" indicates a quantity per unit area. The "soil content" of a quantity refers to the vertical integral from the surface down to the bottom of the soil model. For the content between specified levels in the soil, standard names including content_of_soil_layer are used. [CF-Standard Name]; unit: m
- Attribute description
- lwe_convective_precipitation_rate
- Descriptor
-
"lwe" means liquid water equivalent. [CF-Standard Name]; unit: mm d-1
- Attribute description
- air_temperature-atNearSurface
- Descriptor
-
Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name-vertical_coordinate]; unit: K
- Attribute description
- snowfall_amount
- Descriptor
-
snowfall_amount [CF-Standard Name]; unit: kg m-2
- Attribute description
- air_temperature-atNearSurface (maximum)
- Descriptor
-
Air temperature is the bulk temperature of the air, not the surface (skin) temperature. (maximum) [CF-Standard Name-vertical_coordinate-cell_method]; unit: K
- File identifier
- wdc-climate.de:20319 XML
- Metadata language
-
eng; USA
- Hierarchy level
- collection
- Hierarchy level name
-
HADCM3_SRES_B2
- Date stamp
- 2001-11-26T19:19:25
- Metadata standard name
-
ISO 19115
- Metadata standard version
-
ISO 19115-2:2009
Overviews
Spatial extent
Provided by
My GeoNetwork catalogue