1

NetCDF

unrestricted: unrestricted

eng; USA

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: 1

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

"tendency_of_X" means derivative of X with respect to time. The Lagrangian tendency of a quantity is its rate of change following the motion of the fluid, also called the "material derivative" or "convective derivative". The Lagrangian tendency of air pressure, often called "omega", plays the role of the upward component of air velocity when air pressure is being used as the vertical coordinate. If the vertical air velocity is upwards, it is negative when expressed as a tendency of air pressure; downwards is positive.[CF-Standard Name]; unit: Pa s-1

"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA incoming shortwave flux is the radiative flux from the sun i.e. the "downwelling" TOA shortwave flux. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

atmosphere_net_upward_convective_mass_flux [CF-Standard Name]; unit: kg m-2 s-1

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: 0.01

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface sensible heat flux, also called "turbulent" heat flux, is the exchange of heat between the surface and the air by motion of air. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

relative_humidity [CF-Standard Name]; unit: 0.01

"longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

surface_downwelling_shortwave_flux_in_air [CF-Standard Name]; unit: W m-2

Tendency of Mass Fraction of Stratiform Cloud Liquid Water due to Riming [CF-Standard Name]; unit: s-1

downwelling_shortwave_flux_in_air [CF-Standard Name]; unit: W m-2

Water means water in all phases. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called sublimation.) In accordance with common usage in geophysical disciplines, flux implies per unit area, called flux density in physics. [CF-Standard Name]; unit: kg m-2 s-1

"shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

Tendency of Mass Fraction of Stratiform Cloud Ice due to Deposition and Sublimation [CF-Standard Name]; unit: s-1

surface_downwelling_longwave_flux_in_air [CF-Standard Name]; unit: W m-2

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface sensible heat flux, also called "turbulent" heat flux, is the exchange of heat between the surface and the air by motion of air. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

atmosphere_net_upward_convective_mass_flux [CF-Standard Name]; unit: kg m-2 s-1

The surface called "surface" means the lower boundary of the atmosphere. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. For unit "m day-1" the water equivalent of snow melt is given. [CF-Standard Name]; unit: kg m-2 s-1

Evaporation from Canopy [CF-Standard Name]; unit: kg m-2 s-1

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

Net Downward Flux at Top of Model [CF-Standard Name]; unit: W m-2

ISCCP Cloud Area Fraction [CF-Standard Name]; unit: 0.01

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

surface_upwelling_shortwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. [CF-Standard Name]; unit: kg m-2

number_concentration_of_cloud_liquid_water_particles_in_air [CF-Standard Name]; unit: m-3

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

Concentration of Dry Aerosol Organic Matter [CF-Standard Name]; unit: kg m-3

relative_humidity [CF-Standard Name]; unit: 0.01

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of Y to the mass of X (including Y). [CF-Standard Name]; unit: 1

Downwelling Clear-Sky Shortwave Radiation [CF-Standard Name]; unit: W m-2

"tendency_of_X" means derivative of X with respect to time. The Lagrangian tendency of a quantity is its rate of change following the motion of the fluid, also called the "material derivative" or "convective derivative". The Lagrangian tendency of air pressure, often called "omega", plays the role of the upward component of air velocity when air pressure is being used as the vertical coordinate. If the vertical air velocity is upwards, it is negative when expressed as a tendency of air pressure; downwards is positive.[CF-Standard Name]; unit: Pa s-1

number_concentration_of_ice_crystals_in_air_at_ice_cloud_top [CF-Standard Name]; unit: m-3

moisture_content_of_soil_layer [CF-Standard Name]; unit: kg m-2

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except black carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol. "Dry deposition" means gravitational settling, impact scavenging and turbulent deposition. [CF-Standard Name]; unit: kg m-2 s-1

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. "Dry deposition" means gravitational settling, impact scavenging and turbulent deposition. [CF-Standard Name]; unit: kg m-2 s-1

Concentration of Dust [CF-Standard Name]; unit: kg m-3

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

Tendency of Mass Fraction of Stratiform Cloud Ice In Air Due To Boundary Layer Mixing

Used in MIP table(s): CMOR Table cfMon: CFMIP Monthly-Mean Cloud Diagnostic Fields

Code list created on 2012-10-16 out of standard_output document ( http://cmip-pcmdi.llnl.gov/cmip5/docs/standard_output.xlsx )

cf:'Mass fraction' is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convectionschemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivative of X with respect to time. [CF-Standard Name]; unit: s-1

surface_snow_area_fraction [CF-Standard Name]; unit: 0.01

Downwelling Clear-Sky Shortwave Radiation [CF-Standard Name]; unit: W m-2

The surface called "surface" means the lower boundary of the atmosphere. The surface temperature is the (skin) temperature at the interface, not the bulk temperature of the medium above or below. [CF-Standard Name]; unit: K

Runoff is the liquid water which drains from land. If not specified, "runoff" refers to the sum of surface runoff and subsurface drainage. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

air_pressure_at_convective_cloud_base [CF-Standard Name]; unit: Pa

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 0.01

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

sea_level means mean sea level, which is close to the geoid in sea areas. Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL.[CF-Standard Name]; unit: Pa

"condensed_water" means liquid and ice. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. [CF-Standard Name]; unit: kg m-2

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 0.01

surface_upwelling_shortwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

Speed is the magnitude of velocity. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) The wind speed is the magnitude of the wind velocity.[CF-Standard Name]; unit: m s-1

Tendency of Air Temperature due to Radiative Heating [CF-Standard Name]; unit: K s-1

Tendency of Air Temperature due to Moist Convection [CF-Standard Name]; unit: K s-1

The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

tendency_of_specific_humidity_due_to_diffusion [CF-Standard Name]; unit: s-1

surface_downwelling_shortwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

Surface Concentration of Seasalt [CF-Standard Name]; unit: kg m-3

Ambient Fine Aerosol Opitical Thickness at 550 nm [CF-Standard Name]; unit: 1

The surface called "surface" means the lower boundary of the atmosphere. "Northward" indicates a vector component which is positive when directed northward (negative southward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward northward" indicates the ZY component of a tensor. A downward northward stress is a downward flux of northward momentum, which accelerates the lower medium northward and the upper medium southward. The surface downward stress is the windstress on the surface. [CF-Standard Name]; unit: Pa

surface_snow_thickness [CF-Standard Name]; unit: m

"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of "area_fraction", provide a coordinate variable or scalar coordinate variable of "area_type". Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X. [CF-Standard Name]; unit: 0.01

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. located anywhere within the atmosphere, including at the lower boundary (i.e. earth' surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. [CF-Standard Name]; unit: kg m-2 s-1

Updraught Convective Mass Flux [CF-Standard Name]; unit: kg m-2 s-1

sea_level means mean sea level, which is close to the geoid in sea areas. Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL.[CF-Standard Name]; unit: Pa

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). 'Emission' is a process entirely distinct from "re-emission" which is used in some standard names. [CF-Standard Name]; unit: kg m-2 s-1

Load of Dry Aerosol Organic Matter [CF-Standard Name]; unit: kg m-2

[CF-Standard Name]; unit: m-3

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

atmosphere_mass_of_carbon_dioxide [CF-Standard Name]; unit: kg

Mass Fraction of Stratiform Cloud Ice [CF-Standard Name]; unit: 1

Dry Deposition Rate of DMS [CF-Standard Name]; unit: kg m-2 s-1

Tendency of Mass Fraction of Stratiform Cloud Liquid Water due to Homogeneous Nucleation [CF-Standard Name]; unit: s-1

Load of Dust [CF-Standard Name]; unit: kg m-2

downwelling_longwave_flux_in_air [CF-Standard Name]; unit: W m-2

diffusion coefficient of heat [CF-Standard Name]; unit: m2 s-1

Tendency of Mass Fraction of Stratiform Cloud Ice due to Melting to Rain [CF-Standard Name]; unit: s-1

Downwelling Clear-Sky Longwave Radiation [CF-Standard Name]; unit: W m-2

Mole Fraction of CH4 [CF-Standard Name]; unit: 1e-9

Load of Black Carbon Aerosol [CF-Standard Name]; unit: kg m-2

Depth is the vertical distance below the surface. The root depth is maximum depth of soil reached by plant roots, from which they can extract moisture.[CF-Standard Name]; unit: m

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface sensible heat flux, also called "turbulent" heat flux, is the exchange of heat between the surface and the air by motion of air. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

surface_downwelling_longwave_flux_in_air [CF-Standard Name]; unit: W m-2

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 0.01

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 0.01

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: 1

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface latent heat flux is the exchange of heat between the surface and the air on account of evaporation (including sublimation). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

surface_snow_area_fraction [CF-Standard Name]; unit: 0.01

The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

"tendency_of_X" means derivative of X with respect to time. The Lagrangian tendency of a quantity is its rate of change following the motion of the fluid, also called the "material derivative" or "convective derivative". The Lagrangian tendency of air pressure, often called "omega", plays the role of the upward component of air velocity when air pressure is being used as the vertical coordinate. If the vertical air velocity is upwards, it is negative when expressed as a tendency of air pressure; downwards is positive.[CF-Standard Name]; unit: Pa s-1

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

Downwelling Clear-Sky Longwave Radiation [CF-Standard Name]; unit: W m-2

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of

Y. It means the ratio of the mass of Y to the mass of X (including Y). Convective cloud is that produced by the convection schemes in

an atmosphere model. [CF-Standard Name]; unit: 1

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. "Wet deposition" means deposition by precipitation. [CF-Standard Name]; unit: kg m-2 s-1

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

"condensed_water" means liquid and ice. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. [CF-Standard Name]; unit: kg m-2

Mass Fraction of Convective Cloud Ice [CF-Standard Name]; unit: 1

Global Mean Mole Fraction of HCFC22

Used in MIP table(s): CMOR Table Amon: Monthly Mean Atmospheric Fields and Some Surface Fields

Code list created on 2012-10-16 out of standard_output document ( http://cmip-pcmdi.llnl.gov/cmip5/docs/standard_output.xlsx )

cf:Mole fraction is used in the construction mole_fraction_of_X_in_Y, whereX is a material constituent of Y. A chemical species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. The chemicalformula for HCFC22 is CHClF2. The IUPAC name for HCFC22 is chloro-difluoro-methane. [CF-Standard Name]; unit: 1e-12

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 0.01

"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Atmosphere water vapor content is sometimes referred to as "precipitable water", although this term does not imply the water could all be precipitated.[CF-Standard Name]; unit: kg m-2

Ambient Aerosol Opitical Thickness at 550 nm [CF-Standard Name]; unit: 1

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: 0.01

Concentration of SO4 [CF-Standard Name]; unit: kg m-3

[CF-Standard Name]; unit: kg m-2 s-1

Tendency of Air Temperature due to Advection [CF-Standard Name]; unit: K s-1

Tendency of Mass Fraction of Stratiform Cloud Liquid Water due to Autoconversion [CF-Standard Name]; unit: s-1

Global Mean Mole Fraction of CFC12

Used in MIP table(s): CMOR Table Amon: Monthly Mean Atmospheric Fields and Some Surface Fields

Code list created on 2012-10-16 out of standard_output document ( http://cmip-pcmdi.llnl.gov/cmip5/docs/standard_output.xlsx )

cf:Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of CFC12 is CF2Cl2. The IUPAC name for CFC12 is dichloro-difluoro-methane. [CF-Standard Name]; unit: 1e-12

Tendency of Mass Fraction of Stratiform Cloud Liquid Water due to Advection [CF-Standard Name]; unit: s-1

Surface Concentration of Seasalt [CF-Standard Name]; unit: kg m-3

"Number concentration" means the number of particles or other specified objects per unit volume. [CF-Standard Name]; unit: m-3

Tendency of Mass Fraction of Stratiform Cloud Liquid Water due to Heterogeneous Nucleation [CF-Standard Name]; unit: s-1

Concentration of Dry Aerosol Organic Matter [CF-Standard Name]; unit: kg m-3

Speed is the magnitude of velocity. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) The wind speed is the magnitude of the wind velocity.[CF-Standard Name]; unit: m s-1

The surface called "surface" means the lower boundary of the atmosphere.[CF-Standard Name]; unit: not filled

Model Grid-Cell Area [CF-Standard Name]; unit: m2

The surface called "surface" means the lower boundary of the atmosphere.[CF-Standard Name]; unit: Pa

A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

surface_upwelling_shortwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

surface_downwelling_longwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

relative_humidity [CF-Standard Name]; unit: 0.01

ISCCP Mean Cloud Albedo [CF-Standard Name]; unit: 1

sea_level means mean sea level, which is close to the geoid in sea areas. Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL.[CF-Standard Name]; unit: Pa

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. [CF-Standard Name]; unit: kg m-2

Tendency of Air Temperature Due to Stratiform Cloud and Precipitation and Boundary Layer Mixing [CF-Standard Name]; unit: K s-1

"X_area" means the horizontal area occupied by X within the grid cell.[CF-Standard Name]; unit: 1

The surface called "surface" means the lower boundary of the atmosphere. Runoff is the liquid water which drains from land. If not specified, "runoff" refers to the sum of surface runoff and subsurface drainage. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

The specification of a physical process by the phrase due_to_process means that the quantity named is a

single term in a sum of terms which together compose the general quantity named by omitting the phrase. "tendency_of_X" means derivati

ve of X with respect to time. "specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air. [CF-Standard Name]; unit: s-1

Load of Seasalt [CF-Standard Name]; unit: kg m-2

The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

The surface called "surface" means the lower boundary of the atmosphere. The surface temperature is the (skin) temperature at the interface, not the bulk temperature of the medium above or below. [CF-Standard Name]; unit: K

Soil Frozen Water Content [CF-Standard Name]; unit: kg m-2

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Dry deposition" means gravitational settling, impact scavenging and turbulent deposition. [CF-Standard Name]; unit: kg m-2 s-1

Ambient Aerosol Absorption Optical Thickness at 550 nm [CF-Standard Name]; unit: 1

Tendency of Mass Fraction of Stratiform Cloud Liquid Water In Air

Used in MIP table(s): CMOR Table cfMon: CFMIP Monthly-Mean Cloud Diagnostic Fields

Code list created on 2012-10-16 out of standard_output document ( http://cmip-pcmdi.llnl.gov/cmip5/docs/standard_output.xlsx )

cf:'Mass fraction' is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convectionschemes). "tendency_of_X" means derivative of X with respect to time. [CF-Standard Name]; unit: s-1

mole_fraction_of_dimethyl_sulfide_in_air [CF-Standard Name]; unit: 1

Dry Deposition Rate of SO4 [CF-Standard Name]; unit: kg m-2 s-1

Tendency of Specific Humidity due to Model Physics [CF-Standard Name]; unit: s-1

diffusion coefficient of momentum [CF-Standard Name]; unit: m2 s-1

air_pressure_at_cloud_top [CF-Standard Name]; unit: Pa

Soil temperature is the bulk temperature of the soil, not the surface (skin) temperature. [CF-Standard Name]; unit: K

"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of "area_fraction", provide a coordinate variable or scalar coordinate variable of "area_type". Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X. [CF-Standard Name]; unit: 0.01

toa_outgoing_shortwave_flux_assuming_clear_sky [CF-Standard Name]; unit: W m-2

"moisture" means water in all phases contained in soil. "Content" indicates a quantity per unit area. The "soil content" of a quantity refers to the vertical integral from the surface down to the bottom of the soil model. For the content between specified levels in the soil, standard names including content_of_soil_layer are used. The field capacity of soil is the maximum content of water it can retain against gravitational drainage. [CF-Standard Name]; unit: kg m-2

The surface called "surface" means the lower boundary of the atmosphere.[CF-Standard Name]; unit: not filled

The surface called "surface" means the lower boundary of the atmosphere. Altitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level.[CF-Standard Name]; unit: m

Downwelling Clear-Sky Longwave Radiation [CF-Standard Name]; unit: W m-2

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA outgoing shortwave flux is the reflected and scattered solar radiative flux i.e. the "upwelling" TOA shortwave flux, sometimes called the "outgoing shortwave radiation" or "OSR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

surface_downwelling_shortwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of Y to the mass of X (including Y). [CF-Standard Name]; unit: 1

Sea surface temperature is usually abbreviated as "SST". It is the temperature of sea water near the surface (including the part under sea-ice, if any), and not the skin temperature, whose standard name is surface_temperature. For the temperature of sea water at a particular depth or layer, a data variable of sea_water_temperature with a vertical coordinate axis should be used. [CF-Standard Name]; unit: K

The surface called "surface" means the lower boundary of the atmosphere.[CF-Standard Name]; unit: Pa

relative_humidity [CF-Standard Name]; unit: 0.01

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

air_pressure_at_convective_cloud_top [CF-Standard Name]; unit: Pa

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface latent heat flux is the exchange of heat between the surface and the air on account of evaporation (including sublimation). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

Convective Cloud Droplet Effective Radius [CF-Standard Name]; unit: m

Tendency of Mass Fraction of Stratiform Cloud Ice due to Advection [CF-Standard Name]; unit: s-1

relative_humidity [CF-Standard Name]; unit: 0.01

The surface called "surface" means the lower boundary of the atmosphere. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward eastward" indicates the ZX component of a tensor. A downward eastward stress is a downward flux of eastward momentum, which accelerates the lower medium eastward and the upper medium westward. The surface downward stress is the windstress on the surface. [CF-Standard Name]; unit: Pa

Upwelling Clear-Sky Shortwave Radiation [CF-Standard Name]; unit: W m-2

grid scale cloud area fraction. Layer" means any layer with upper and lower boundaries that have constant valu

es in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model

layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary

coordinate variable) as well. "X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occu

pied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". In an atmosphere model, stratiform clou

d is that produced by large-scale convergence (not the convection schemes). [CF-Standard Name]; unit: 0.01

"longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

"tendency_of_X" means derivative of X with respect to time. Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K s-1

Column Integrated Cloud Droplet Number [CF-Standard Name]; unit: m-2

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. Black carbon aerosol is composed of elemental carbon. It is strongly light absorbing. "Wet deposition" means deposition by precipitation. [CF-Standard Name]; unit: kg m-2 s-1

"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of "area_fraction", provide a coordinate variable or scalar coordinate variable of "area_type". Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X. [CF-Standard Name]; unit: 0.01

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

Global Mean Mole Fraction of CFC11

Used in MIP table(s): CMOR Table Amon: Monthly Mean Atmospheric Fields and Some Surface Fields

Code list created on 2012-10-16 out of standard_output document ( http://cmip-pcmdi.llnl.gov/cmip5/docs/standard_output.xlsx )

cf:Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of CFC11 is CFCl3. The IUPAC name for CFC11 is trichloro-fluoro-methane. [CF-Standard Name]; unit: 1e-12

Hydrometeor Effective Radius of Stratiform Cloud Liquid Water [CF-Standard Name]; unit: m

number_concentration_of_cloud_liquid_water_particles_in_air_at_liquid_water_cloud_top [CF-Standard Name]; unit: m-3

Tendency of Air Temperature due to Diabatic Processes [CF-Standard Name]; unit: K s-1

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. [CF-Standard Name]; unit: 1e-9

Tendency of Specific Humidity due to Stratiform Cloud Condensation and Evaporation [CF-Standard Name]; unit: s-1

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. "Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock. [CF-Standard Name]; unit: 0.01

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: 0.01

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: 0.01

air_pressure_at_convective_cloud_top [CF-Standard Name]; unit: Pa

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 0.01

surface_snow_amount [CF-Standard Name]; unit: kg m-2

air_pressure_at_cloud_top [CF-Standard Name]; unit: Pa

The surface called "surface" means the lower boundary of the atmosphere. The surface temperature is the (skin) temperature at the interface, not the bulk temperature of the medium above or below. [CF-Standard Name]; unit: K

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

Downdraught Convective Mass Flux [CF-Standard Name]; unit: kg m-2 s-1

Specific humidity is the mass fraction of water vapor in (moist) air. [CF-Standard Name]; unit: s-1

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. "Dry deposition" means gravitational settling, impact scavenging and turbulent deposition. [CF-Standard Name]; unit: kg m-2 s-1

Mass Fraction of Stratiform Cloud Liquid Water [CF-Standard Name]; unit: 1

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

"moisture" means water in all phases contained in soil. "Content" indicates a quantity per unit area. The "soil content" of a quantity refers to the vertical integral from the surface down to the bottom of the soil model. For the content between specified levels in the soil, standard names including content_of_soil_layer are used. [CF-Standard Name]; unit: kg m-2

"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA incoming shortwave flux is the radiative flux from the sun i.e. the "downwelling" TOA shortwave flux. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

Concentration of SO4 [CF-Standard Name]; unit: kg m-3

Upwelling Clear-Sky Shortwave Radiation [CF-Standard Name]; unit: W m-2

Mole Fraction of N2O [CF-Standard Name]; unit: 1e-9

Runoff is the liquid water which drains from land. If not specified, "runoff" refers to the sum of surface runoff and subsurface drainage. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

Tendency of Mass Fraction of Stratiform Cloud Liquid Water In Air Due To Bergeron Findeisen Process To Cloud Ice

Used in MIP table(s): CMOR Table cfMon: CFMIP Monthly-Mean Cloud Diagnostic Fields

Code list created on 2012-10-16 out of standard_output document ( http://cmip-pcmdi.llnl.gov/cmip5/docs/standard_output.xlsx )

cf:'Mass fraction' is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convection schemes). The specification of a physical process by the phrase due_to_process means that the quantity named is a single term in a sum of terms which together compose the general quantity named by omitting the phrase. The Bergeron-Findeisen process is the conversion of cloud liquid water to cloud ice arising from the fact that water vapor has a lower equilibrium vapor pressure with respect to ice than it has with respect to liquid water at the same subfreezing temperature. "tendency_of_X" means derivative of X with respect to time. [CF-Standard Name]; unit: s-1

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. Black carbon aerosol is composed of elemental carbon. It is strongly light absorbing. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. [CF-Standard Name]; unit: kg m-2 s-1

Concentration of Dust [CF-Standard Name]; unit: kg m-3

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 0.01

downwelling_longwave_flux_in_air [CF-Standard Name]; unit: W m-2

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 0.01

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. "Emission" means emission from a primary source located anywhere within the atmosphere, including at the lower boundary (i.e. earth's surface). "Emission" is a process entirely distinct from "re-emission" which is used in some standard names. [CF-Standard Name]; unit: kg m-2 s-1

soot_content_of_surface_snow [CF-Standard Name]; unit: kg m-2

"shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

Global Mean Mole Fraction of CFC113

Used in MIP table(s): CMOR Table Amon: Monthly Mean Atmospheric Fields and Some Surface Fields

Code list created on 2012-10-16 out of standard_output document ( http://cmip-pcmdi.llnl.gov/cmip5/docs/standard_output.xlsx )

cf:Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. The chemical formula of CFC113 is CCl2FCClF2. The IUPAC name for CFC113 is 1,1,2-trichloro-1,2,2-trifluoro-ethane. [CF-Standard Name]; unit: 1e-12

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: 0.01

Ambient Aerosol Opitical Thickness at 550 nm [CF-Standard Name]; unit: 1

ISCCP Mean Cloud Albedo [CF-Standard Name]; unit: 1

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: 1

The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

Runoff is the liquid water which drains from land. If not specified, "runoff" refers to the sum of surface runoff and subsurface drainage. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

PARASOL Reflectance [CF-Standard Name]; unit: 1

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface latent heat flux is the exchange of heat between the surface and the air on account of evaporation (including sublimation). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

toa_outgoing_shortwave_flux_assuming_clear_sky [CF-Standard Name]; unit: W m-2

surface_downwelling_shortwave_flux_in_air [CF-Standard Name]; unit: W m-2

Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface. [CF-Standard Name]; unit: m

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: 1

Sublimation over Sea Ice [CF-Standard Name]; unit: kg m-2 s-1

moisture_content_of_soil_layer [CF-Standard Name]; unit: kg m-2

Tendency of Mass Fraction of Stratiform Cloud Liquid Water due to Condensation and Evaporation [CF-Standard Name]; unit: s-1

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: 1

PARASOL Reflectance [CF-Standard Name]; unit: 1

mole_fraction_of_sulfur_dioxide_in_air [CF-Standard Name]; unit: 1

[CF-Standard Name]; unit: kg m-2 s-1

Surface Concentration of Black Carbon Aerosol [CF-Standard Name]; unit: kg m-3

Load of SO4 [CF-Standard Name]; unit: kg m-2

temperature_in_surface_snow [CF-Standard Name]; unit: K

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. Black carbon aerosol is composed of elemental carbon. It is strongly light absorbing. "Dry deposition" means gravitational settling, impact scavenging and turbulent deposition. [CF-Standard Name]; unit: kg m-2 s-1

A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

[CF-Standard Name]; unit: kg m-2 s-1

Tendency of Specific Humidity due to Advection [CF-Standard Name]; unit: s-1

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: 0.01

"longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA outgoing shortwave flux is the reflected and scattered solar radiative flux i.e. the "upwelling" TOA shortwave flux, sometimes called the "outgoing shortwave radiation" or "OSR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

Speed is the magnitude of velocity. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) The wind speed is the magnitude of the wind velocity.[CF-Standard Name]; unit: m s-1

"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of "area_fraction", provide a coordinate variable or scalar coordinate variable of "area_type". Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X. [CF-Standard Name]; unit: 0.01

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. "particulate_organic_matter_dry_aerosol" means all particulate organic matter dry aerosol except black carbon. It is the sum of primary_particulate_organic_matter_dry_aerosol and secondary_particulate_organic_matter_dry_aerosol. "Wet deposition" means deposition by precipitation. [CF-Standard Name]; unit: kg m-2 s-1

effective_radius_of_cloud_liquid_water_particle_at_liquid_water_cloud_top [CF-Standard Name]; unit: m

Surface Concentration of Black Carbon Aerosol [CF-Standard Name]; unit: kg m-3

"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of "area_fraction", provide a coordinate variable or scalar coordinate variable of "area_type". Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X. [CF-Standard Name]; unit: 0.01

Tendency of Mass Fraction of Stratiform Cloud Ice In Air

Used in MIP table(s): CMOR Table cfMon: CFMIP Monthly-Mean Cloud Diagnostic Fields

Code list created on 2012-10-16 out of standard_output document ( http://cmip-pcmdi.llnl.gov/cmip5/docs/standard_output.xlsx )

cf:'Mass fraction' is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of X to the mass of Y (including X). A chemical or biological species denoted by X may be described by a single term such as 'nitrogen' or a phrase such as 'nox_expressed_as_nitrogen'. In an atmosphere model, stratiform cloud is that produced by large-scale convergence (not the convectionschemes). "tendency_of_X" means derivative of X with respect to time. [CF-Standard Name]; unit: s-1

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell.[CF-Standard Name]; unit: 0.01

surface_downwelling_longwave_flux_in_air [CF-Standard Name]; unit: W m-2

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 0.01

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: 1

relative_humidity [CF-Standard Name]; unit: 0.01

surface_downwelling_shortwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

moisture_content_of_soil_layer [CF-Standard Name]; unit: kg m-2

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of Y to the mass of X (including Y). [CF-Standard Name]; unit: 1

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: 0.01

Tendency of Mass Fraction of Stratiform Cloud Ice due to Icefall [CF-Standard Name]; unit: s-1

Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface. [CF-Standard Name]; unit: m

tendency_of_atmosphere_mass_content_of_dimethyl_sulfide_due_to_emission [CF-Standard Name]; unit: kg m-2 s-1

Upwelling Clear-Sky Longwave Radiation 4XCO2 Atmosphere [CF-Standard Name]; unit: W m-2

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 0.01

surface_downwelling_shortwave_flux_in_air [CF-Standard Name]; unit: W m-2

"longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

surface_downwelling_longwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

"Water" means water in all phases. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called "sublimation".) In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

air_pressure_at_convective_cloud_base [CF-Standard Name]; unit: Pa

"tendency_of_X" means derivative of X with respect to time. "Content" indicates a quantity per unit area. "Aerosol" means the suspended liquid or solid particles in air (except cloud droplets). Aerosol takes up ambient water (a process known as hygroscopic growth) depending on the relative humidity and the composition of the aerosol. "Dry aerosol" means aerosol without water. "Wet deposition" means deposition by precipitation. [CF-Standard Name]; unit: kg m-2 s-1

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 0.01

[CF-Standard Name]; unit: m-1

downwelling_shortwave_flux_in_air [CF-Standard Name]; unit: W m-2

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of Y to the mass of X (including Y). [CF-Standard Name]; unit: 1

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

surface_snow_amount [CF-Standard Name]; unit: kg m-2

Upwelling Clear-Sky Longwave Radiation 4XCO2 Atmosphere [CF-Standard Name]; unit: W m-2

The surface called "surface" means the lower boundary of the atmosphere.[CF-Standard Name]; unit: Pa

eng; USA

MIM5am

ISO 19115

ISO 19115-2:2009