unrestricted: unrestricted

eng; USA

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. "Land ice" means glaciers, ice-caps and ice-sheets resting on bedrock. [CF-Standard Name]; unit: 0.01

"tendency_of_X" means derivative of X with respect to time. The Lagrangian tendency of a quantity is its rate of change following the motion of the fluid, also called the "material derivative" or "convective derivative". The Lagrangian tendency of air pressure, often called "omega", plays the role of the upward component of air velocity when air pressure is being used as the vertical coordinate. If the vertical air velocity is upwards, it is negative when expressed as a tendency of air pressure; downwards is positive.[CF-Standard Name]; unit: Pa s-1

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

"longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

relative_humidity [CF-Standard Name]; unit: 0.01

The surface called "surface" means the lower boundary of the atmosphere. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. For unit "m day-1" the water equivalent of snow melt is given. [CF-Standard Name]; unit: kg m-2 s-1

surface_upwelling_shortwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of Y to the mass of X (including Y). [CF-Standard Name]; unit: 1

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface sensible heat flux, also called "turbulent" heat flux, is the exchange of heat between the surface and the air by motion of air. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of "area_fraction", provide a coordinate variable or scalar coordinate variable of "area_type". Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X. [CF-Standard Name]; unit: 0.01

surface_snow_area_fraction [CF-Standard Name]; unit: 0.01

"tendency_of_X" means derivative of X with respect to time. The Lagrangian tendency of a quantity is its rate of change following the motion of the fluid, also called the "material derivative" or "convective derivative". The Lagrangian tendency of air pressure, often called "omega", plays the role of the upward component of air velocity when air pressure is being used as the vertical coordinate. If the vertical air velocity is upwards, it is negative when expressed as a tendency of air pressure; downwards is positive.[CF-Standard Name]; unit: Pa s-1

Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. [CF-Standard Name]; unit: kg m-2

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

Net Downward Flux at Top of Model [CF-Standard Name]; unit: W m-2

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

surface_downwelling_longwave_flux_in_air [CF-Standard Name]; unit: W m-2

"moisture" means water in all phases contained in soil. "Content" indicates a quantity per unit area. The "soil content" of a quantity refers to the vertical integral from the surface down to the bottom of the soil model. For the content between specified levels in the soil, standard names including content_of_soil_layer are used. The field capacity of soil is the maximum content of water it can retain against gravitational drainage. [CF-Standard Name]; unit: kg m-2

sea_level means mean sea level, which is close to the geoid in sea areas. Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL.[CF-Standard Name]; unit: Pa

Speed is the magnitude of velocity. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) The wind speed is the magnitude of the wind velocity.[CF-Standard Name]; unit: m s-1

atmosphere_mass_of_carbon_dioxide [CF-Standard Name]; unit: kg

"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of "area_fraction", provide a coordinate variable or scalar coordinate variable of "area_type". Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X. [CF-Standard Name]; unit: 0.01

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

The surface called "surface" means the lower boundary of the atmosphere. "Northward" indicates a vector component which is positive when directed northward (negative southward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward northward" indicates the ZY component of a tensor. A downward northward stress is a downward flux of northward momentum, which accelerates the lower medium northward and the upper medium southward. The surface downward stress is the windstress on the surface. [CF-Standard Name]; unit: Pa

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

surface_downwelling_shortwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

sea_level means mean sea level, which is close to the geoid in sea areas. Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL.[CF-Standard Name]; unit: Pa

"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of "area_fraction", provide a coordinate variable or scalar coordinate variable of "area_type". Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X. [CF-Standard Name]; unit: 0.01

"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of "area_fraction", provide a coordinate variable or scalar coordinate variable of "area_type". Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X. [CF-Standard Name]; unit: 0.01

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface latent heat flux is the exchange of heat between the surface and the air on account of evaporation (including sublimation). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface sensible heat flux, also called "turbulent" heat flux, is the exchange of heat between the surface and the air by motion of air. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

surface_downwelling_longwave_flux_in_air [CF-Standard Name]; unit: W m-2

surface_snow_area_fraction [CF-Standard Name]; unit: 0.01

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: 1

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

Speed is the magnitude of velocity. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) The wind speed is the magnitude of the wind velocity.[CF-Standard Name]; unit: m s-1

"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. Atmosphere water vapor content is sometimes referred to as "precipitable water", although this term does not imply the water could all be precipitated.[CF-Standard Name]; unit: kg m-2

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

"condensed_water" means liquid and ice. "Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. [CF-Standard Name]; unit: kg m-2

sea_level means mean sea level, which is close to the geoid in sea areas. Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL.[CF-Standard Name]; unit: Pa

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

Soil temperature is the bulk temperature of the soil, not the surface (skin) temperature. [CF-Standard Name]; unit: K

toa_outgoing_shortwave_flux_assuming_clear_sky [CF-Standard Name]; unit: W m-2

The surface called "surface" means the lower boundary of the atmosphere. Runoff is the liquid water which drains from land. If not specified, "runoff" refers to the sum of surface runoff and subsurface drainage. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of "area_fraction", provide a coordinate variable or scalar coordinate variable of "area_type". Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X. [CF-Standard Name]; unit: 0.01

"X_area" means the horizontal area occupied by X within the grid cell.[CF-Standard Name]; unit: 1

The surface called "surface" means the lower boundary of the atmosphere. The surface temperature is the (skin) temperature at the interface, not the bulk temperature of the medium above or below. [CF-Standard Name]; unit: K

The surface called "surface" means the lower boundary of the atmosphere. Altitude is the (geometric) height above the geoid, which is the reference geopotential surface. The geoid is similar to mean sea level.[CF-Standard Name]; unit: m

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. [CF-Standard Name]; unit: 1e-9

The surface called "surface" means the lower boundary of the atmosphere. "Upward" indicates a vector component which is positive when directed upward (negative downward). The surface latent heat flux is the exchange of heat between the surface and the air on account of evaporation (including sublimation). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of "area_fraction", provide a coordinate variable or scalar coordinate variable of "area_type". Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X. [CF-Standard Name]; unit: 0.01

air_pressure_at_convective_cloud_top [CF-Standard Name]; unit: Pa

The surface called "surface" means the lower boundary of the atmosphere. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward eastward" indicates the ZX component of a tensor. A downward eastward stress is a downward flux of eastward momentum, which accelerates the lower medium eastward and the upper medium westward. The surface downward stress is the windstress on the surface. [CF-Standard Name]; unit: Pa

"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of "area_fraction", provide a coordinate variable or scalar coordinate variable of "area_type". Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X. [CF-Standard Name]; unit: 0.01

"longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

relative_humidity [CF-Standard Name]; unit: 0.01

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

The surface called "surface" means the lower boundary of the atmosphere. The surface temperature is the (skin) temperature at the interface, not the bulk temperature of the medium above or below. [CF-Standard Name]; unit: K

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: 0.01

surface_snow_amount [CF-Standard Name]; unit: kg m-2

"moisture" means water in all phases contained in soil. "Content" indicates a quantity per unit area. The "soil content" of a quantity refers to the vertical integral from the surface down to the bottom of the soil model. For the content between specified levels in the soil, standard names including content_of_soil_layer are used. [CF-Standard Name]; unit: kg m-2

Runoff is the liquid water which drains from land. If not specified, "runoff" refers to the sum of surface runoff and subsurface drainage. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA incoming shortwave flux is the radiative flux from the sun i.e. the "downwelling" TOA shortwave flux. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 0.01

Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface. [CF-Standard Name]; unit: m

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

surface_downwelling_shortwave_flux_in_air [CF-Standard Name]; unit: W m-2

Runoff is the liquid water which drains from land. If not specified, "runoff" refers to the sum of surface runoff and subsurface drainage. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: 0.01

Gross primary productivity is the rate of synthesis of biomass per unit area from inorganic precursors by autotrophs, especially by photosynthesising plants using sunlight for energy. The producers also respire some of this biomass and the difference is net_primary_producivity. "Productivity of carbon" refers to the production of biomass expressed as the mass of carbon which it contains. [CF-Standard Name]; unit: kg m-2 s-1

"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA outgoing shortwave flux is the reflected and scattered solar radiative flux i.e. the "upwelling" TOA shortwave flux, sometimes called the "outgoing shortwave radiation" or "OSR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

Speed is the magnitude of velocity. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) The wind speed is the magnitude of the wind velocity.[CF-Standard Name]; unit: m s-1

A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation. "toa" means top of atmosphere. The TOA outgoing longwave flux is the upwelling thermal radiative flux, often called the "outgoing longwave radiation" or "OLR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of "area_fraction", provide a coordinate variable or scalar coordinate variable of "area_type". Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X. [CF-Standard Name]; unit: 0.01

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: 1

"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of "area_fraction", provide a coordinate variable or scalar coordinate variable of "area_type". Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X. [CF-Standard Name]; unit: 0.01

[CF-Standard Name]; unit: kg m-2 s-1

The surface called "surface" means the lower boundary of the atmosphere.[CF-Standard Name]; unit: Pa

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell.[CF-Standard Name]; unit: 0.01

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

surface_snow_amount [CF-Standard Name]; unit: kg m-2

Mass fraction is used in the construction mass_fraction_of_X_in_Y, where X is a material constituent of Y. It means the ratio of the mass of Y to the mass of X (including Y). [CF-Standard Name]; unit: 1

surface_downwelling_longwave_flux_in_air_assuming_clear_sky [CF-Standard Name]; unit: W m-2

Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface. [CF-Standard Name]; unit: m

Net primary productivity is the excess of gross_primary_producivity (rate of synthesis of biomass per unit area from inorganic precursors by autotrophs, or "producers", especially by photosynthesising plants using sunlight for energy) over the rate at which they themselves respire some of this biomass (plant_respiration, assuming all producers to be plants). "Productivity of carbon" refers to the production of biomass expressed as the mass of carbon which it contains. [CF-Standard Name]; unit: kg m-2 s-1

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1

"Water" means water in all phases. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called "sublimation".) In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

surface_downwelling_shortwave_flux_in_air [CF-Standard Name]; unit: W m-2

"Area fraction" means the fraction of horizontal area. To specify which area is quantified by a variable of "area_fraction", provide a coordinate variable or scalar coordinate variable of "area_type". Alternatively, if one is defined, use a more specific standard name of "X_area_fraction" for the fraction of horizontal area occupied by X. [CF-Standard Name]; unit: 0.01