My GeoNetwork catalogue
IPCC DDC: MIROC MIROC-ES2L model output prepared for CMIP6 CMIP esm-hist
These data include the subset used by IPCC AR6 WGI authors of the datasets originally published in ESGF for 'CMIP6.CMIP.MIROC.MIROC-ES2L.esm-hist' with the full Data Reference Syntax following the template 'mip_era.activity_id.institution_id.source_id.experiment_id.member_id.table_id.variable_id.grid_label.version'. The MIROC-ES2L climate model, released in 2018, includes the following components: aerosol: SPRINTARS6.0, atmos: CCSR AGCM (T42; 128 x 64 longitude/latitude; 40 levels; top level 3 hPa), land: MATSIRO6.0+VISIT-e ver.1.0, ocean: COCO4.9 (tripolar primarily 1deg; 360 x 256 longitude/latitude; 63 levels; top grid cell 0-2 m), ocnBgchem: OECO ver.2.0; NPZD-type with C/N/P/Fe/O cycles, seaIce: COCO4.9. The model was run by the JAMSTEC (Japan Agency for Marine-Earth Science and Technology, Kanagawa 236-0001, Japan), AORI (Atmosphere and Ocean Research Institute, The University of Tokyo, Chiba 277-8564, Japan), NIES (National Institute for Environmental Studies, Ibaraki 305-8506, Japan), and R-CCS (RIKEN Center for Computational Science, Hyogo 650-0047, Japan) (MIROC) in native nominal resolutions: aerosol: 500 km, atmos: 500 km, land: 500 km, ocean: 100 km, ocnBgchem: 100 km, seaIce: 100 km.
Simple
- Date (Publication)
- 2023-07-28
- Edition
-
1
- Citation identifier
- C6CMMIMILEH
- Citation identifier
- doi:10.26050/WDCC/AR6.C6CMMIMILEH
http://www.jamstec.go.jp/e/
http://www.jamstec.go.jp/e/
http://www.jamstec.go.jp/e/
http://www.jamstec.go.jp/e/
http://www.jamstec.go.jp/e/
http://www.jamstec.go.jp/e/
http://www.nies.go.jp/index-e.html
http://www.jamstec.go.jp/e/
http://www.jamstec.go.jp/e/
http://www.jamstec.go.jp/e/
http://www.jamstec.go.jp/e/
http://www.jamstec.go.jp/e/
http://www.jamstec.go.jp/e/
https://www.iis.u-tokyo.ac.jp/en/
http://www.nies.go.jp/index-e.html
http://www.nies.go.jp/index-e.html
http://www.jamstec.go.jp/e/
http://www.jamstec.go.jp/e/
http://www.jamstec.go.jp/e/
http://www.jamstec.go.jp/e/
http://www.jamstec.go.jp/e/
- Name
-
NetCDF
- Keywords
-
-
CMIP
-
- Keywords
-
-
CMIP6
-
- Keywords
-
-
IPCC
-
- Keywords
-
-
IPCC-AR6
-
- Keywords
-
-
IPCC-DDC
-
- Keywords
-
-
MIROC
-
- Keywords
-
-
MIROC-ES2L
-
- Keywords
-
-
climate change
-
- Keywords
-
-
esm-hist
-
- Keywords
-
-
model-output
-
- Use limitation
-
CC-BY-4.0: Creative Commons Attribution 4.0 International https://creativecommons.org/licenses/by/4.0/
- Language
-
eng; USA
))
- Begin date
- 1850-01-16
- End date
- 2014-12-16
- Distribution format
-
-
NetCDF
()
-
NetCDF
()
- Transfer size
- 14833
- OnLine resource
- https://www.wdc-climate.de/ui/entry?acronym=C6CMMIMILEH
- Hierarchy level
- collection
- Attribute description
- air_pressure_at_mean_sea_level
- Descriptor
-
Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL. Air pressure is the force per unit area which would be exerted when the moving gas molecules of which the air is composed strike a theoretical surface of any orientation. "Mean sea level" means the time mean of sea surface elevation at a given location over an arbitrary period sufficient to eliminate the tidal signals. [CF-Standard Name]; unit: Pa
- Attribute description
- sea_ice_area_fraction
- Descriptor
-
sea_ice_area_fraction [CF-Standard Name]; unit: 0.01
- Attribute description
- surface_temperature
- Descriptor
-
The surface called "surface" means the lower boundary of the atmosphere. The surface temperature is the (skin) temperature at the interface, not the bulk temperature of the medium above or below. [CF-Standard Name]; unit: K
- Attribute description
- air_temperature
- Descriptor
-
Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K
- Attribute description
- mole_fraction_of_carbon_dioxide_in_air
- Descriptor
-
Mole fraction is used in the construction mole_fraction_of_X_in_Y, where X is a material constituent of Y. [CF-Standard Name]; unit: mol mol-1
- Attribute description
- surface_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon
- Descriptor
-
surface_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon [CF-Standard Name]; unit: kg m-2 s-1
- Attribute description
- precipitation_flux
- Descriptor
-
In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1
- Attribute description
- surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes
- Descriptor
-
surface_net_downward_mass_flux_of_carbon_dioxide_expressed_as_carbon_due_to_all_land_processes [CF-Standard Name]; unit: kg m-2 s-1
- Attribute description
- air_temperature
- Descriptor
-
Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K
- Attribute description
- eastward_wind
- Descriptor
-
"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m s-1
- Attribute description
- air_temperature
- Descriptor
-
Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K
- Attribute description
- atmosphere_mass_content_of_water_vapor
- Descriptor
-
atmosphere_mass_content_of_water_vapor [CF-Standard Name]; unit: kg m-2
- Attribute description
- surface_air_pressure
- Descriptor
-
The surface called "surface" means the lower boundary of the atmosphere.[CF-Standard Name]; unit: Pa
- Attribute description
- sea_surface_temperature
- Descriptor
-
Sea surface temperature is usually abbreviated as "SST". It is the temperature of sea water near the surface (including the part under sea-ice, if any), and not the skin temperature, whose standard name is surface_temperature. For the temperature of sea water at a particular depth or layer, a data variable of sea_water_temperature with a vertical coordinate axis should be used. [CF-Standard Name]; unit: degC
- Attribute description
- surface_snow_amount
- Descriptor
-
surface_snow_amount [CF-Standard Name]; unit: kg m-2
- File identifier
- wdc-climate.de:3926320 XML
- Metadata language
-
eng; USA
- Hierarchy level
- collection
- Hierarchy level name
-
C6CMMIMILEH
- Date stamp
- 2020-07-31T00:00:00
- Metadata standard name
-
ISO 19115
- Metadata standard version
-
ISO 19115-2:2009
Overviews
Spatial extent
Provided by
