The experiment CLM_C20_2_D2 contains European regional climate simulations of the years 1960-2000 on a rotated grid (CLM non hydrostatic, 0.165 degree hor. resolution, see http://www.clm-community.eu ). The simulations of the 20th century (1960-2000) have been forced by the second (_2_) run of the global 20th century climate (EH5-T63L31_OM-GR1.5L40_20C_2_6H) with observed anthropogenic forcing. In data stream 2 (_D2) the output variables of CLM are stored as time series on a rotated grid. The model region starts at -20.8725/-23.7275 (lat/lon in rotated coordinates; centre of lower left grid box) with an increment of 0.165 degree. The position of the North Pole in the rotated grid is: 39.25/-162.0 (lat/lon). The number of grid points is 255/241 (lat/lon). The sponge zone (numerically unreliable boundary grid points) of the original model output has been cut off. The regional model variables include two-dimensional near surface fields, as well as soil and atmospheric fields on different layers. The soil fields are simulated on 10 different levels with a maximum depth of 15 meters. The atmospheric fields are given on 6 pressure levels (200, 500, 700, 850, 925 and 1000 hPa). The time interval of the output fields ranges from 1 to 3 hours and includes daily output fields, depending on the respective variables. Please contact sga"at"dkrz.de for data request details. See http://sga.wdc-climate.de for more details on CLM simulations in the context of the BMBF funding priority "klimazwei", some useful information on handling climate model data and the data access regulations. The output format is netCDF Experiment with CLM 2.4.11 on NEC-SX6(hurrikan) raw data: hpss:/dxul/ut/k/k204095/prism/experiments/C20_2

The experiment CLM_A2_ZS contains Northern European regional climate simulations of the years 2070-2099 on a rotated grid (CLM non hydrostatic, 0.44 deg. hor. resolution, see http://www.clm-community.eu ). It is forced by the first (_1_) run of the global IPCC SRES A2 (EH5-T63L31_OM-GR1.5L40_A2_1_6H), which describes an economic development which is primarily regionally oriented and the technical change is more fragmented and slower than in the other SRES storylines. The model region starts at -19.36/-40.48 (lat/lon in rotated coordinates; centre of lower left corner of the domain) with rotated North Pole at 21.3/-175.0 (lat/lon). The number of grid points is 80/146 (lat/lon). The sponge zone (numerically unreliable boundary grid points) consists of 8 grid boxes at each border. EH5-T63L31_OM-GR1.5L40_A2_1_6H were nudged during the simulations (spectral nudging,von Storch, H., A spectral nudging technique for dynamical downscaling purposes. Mon. Wea. Rev, 2000 ) The regional model variables include two-dimensional near surface fields and atmospheric fields on 6 pressure levels (200, 500, 700, 850, 925 and 1000 hPa) for zonal and meridional wind, temperature and pressure. The time interval of the output fields is 3 hours. Please contact sga"at"dkrz.de for data request details. The output format is netCDF. Experiment with CLM 2.4.6 on HPC Cluster ( blizzard ).

The experiment CLM_A1B_1_D3 contains European regional climate simulations of the years 2001-2100 on a regular geographical grid. The data are generated during post processing of the corresponding data stream 2 experiment (CLM_A1B_1_D2) of regional climate model runs (CLM non hydrostatic, see http://www.clm-community.eu ). It is forced by the first (_1_) run of the global IPCC scenario A1B (EH5-T63L31_OM-GR1.5L40_A1B_1_6H), which describes a possible future world of very rapid economic growth, global population peaking in mid-century and rapid introduction of new and more efficient technologies with a balance across all energy sources. In data stream 3 (_D3) the output variables of CLM data stream 2 and some additionally derived parameters are stored as time series on a regular geograhical grid (0.2 deg. hor. res.). The transformation has been done via CDO routines. Please note, that none of the variables has been corrected for topographical differences between the two grids. The model domain of data stream 3 covers the European region starting at 34.6/-10.6 (lat/lon, centre of lower left grid box) with an increment of 0.2 degree. The number of grid points is 177/238 (lat/lon). For some model variables and additionally derived parameters some statistics on daily, monthly or yearly basis are available. See also http://sga.wdc-climate.de for a list of available parameters. Please contact sga"at"dkrz.de for data request details. See http://sga.wdc-climate.de for more details on CLM simulations in the context of the BMBF funding priority "klimazwei", some useful information on handling climate model data and the data access regulations. The output format is netCDF Experiment with CLM 2.4.11 on NEC-SX6(hurrikan) raw data: hpss:/dxul/ut/k/k204095/prism/experiments/A1B_1

The experiment CLM_20C_ZS contains Northern European regional climate simulations of the years 1960-1989 on a rotated grid (CLM non hydrostatic, 0.44 deg. hor. resolution, see http://www.clm-community.eu ). It is forced by the first (_1_) run of the global IPCC SRES 20C (EH5-T63L31_OM-GR1.5L40_20C_1_6H). The data represent 6 hourly values of a 20th century simulation with observed anthropogenic forcings (CO2, CH4, N2O, CFCs, O3 and sulfate). The model region starts at -19.36/-40.48 (lat/lon in rotated coordinates; centre of lower left corner of the domain) with rotated North Pole at 21.3/-175.0 (lat/lon). The number of grid points is 80/146 (lat/lon). The sponge zone (numerically unreliable boundary grid points) consists of 8 gridboxes at each border. EH5-T63L31_OM-GR1.5L40_20C_1_6H were nudged during the simulations (spectral nudging,von Storch, H., A spectral nudging technique for dynamical downscaling purposes. Mon. Wea. Rev, 2000 ) The regional model variables include two-dimensional near surface fields and atmospheric fields on 6 pressure levels (200, 500, 700, 850, 925 and 1000 hPa) for zonal and meridional wind, temperature and pressure. The time interval of the output fields is 3 hours. Please contact sga"at"dkrz.de for data request details. The output format is netCDF. Experiment with CLM 2.4.6 on HPC Cluster ( blizzard ).

The experiment CLM_A1B_2_D3 contains European regional climate simulations of the years 2001-2100 on a regular geographical grid. The data are generated during post processing of the corresponding data stream 2 experiment (CLM_A1B_2_D2) of regional climate model runs (CLM non hydrostatic, see http://www.clm-community.eu ). It is forced by the second (_2_) run of the global IPCC scenario A1B (EH5-T63L31_OM-GR1.5L40_A1B_2_6H), which describes a possible future world of very rapid economic growth, global population peaking in mid-century and rapid introduction of new and more efficient technologies with a balance across all energy sources. In data stream 3 (_D3) the output variables of CLM data stream 2 and some additionally derived parameters are stored as time series on a regular geograhical grid (0.2 deg. hor. res.). The transformation has been done via CDO routines. Please note, that none of the variables has been corrected for topographical differences between the two grids. The model domain of data stream 3 covers the European region starting at 34.6/-10.6 (lat/lon, centre of lower left grid box) with an increment of 0.2 degree. The number of grid points is 177/238 (lat/lon). For some model variables and additionally derived parameters some statistics on daily, monthly or yearly basis are available. See also http://sga.wdc-climate.de for a list of available parameters. Please contact sga"at"dkrz.de for data request details. See http://sga.wdc-climate.de for more details on CLM simulations in the context of the BMBF funding priority "klimazwei", some useful information on handling climate model data and the data access regulations. The output format is netCDF Experiment with CLM 2.4.11 on NEC-SX6(hurrikan) raw data: hpss:/dxul/ut/k/k204095/prism/experiments/A1B_2

The experiment CLM_B1_1_D3 contains European regional climate simulations of the years 2001-2100 on a regular geographical grid. The data are generated during post processing of the corresponding data stream 2 experiment (CLM_B1_1_D2) of regional climate model runs (CLM non hydrostatic, see http://www.clm-community.eu ). It is forced by the first (_1_) run of the global IPCC scenario B1 (EH5-T63L31_OM-GR1.5L40_B1_1_6H), which describes a possible future world with global population peaking in mid-century and rapid change in economic structures towards a service and information economy. An introduction of clean and resource efficient technologies was assumed. In data stream 3 (_D3) the output variables of CLM data stream 2 and some additionally derived parameters are stored as time series on a regular geographical grid (0.2 degree res.). The transformation has been done via CDO routines. Please note, that none of the variables has been corrected for topographical differences between the two grids. The model domain of data stream 3 covers the European region starting at 34.6/-10.6 (lat/lon, centre of lower left grid box). The number of grid points is 177/238 (lat/lon). For some model variables and additionally derived parameters some statistics on daily, monthly or yearly basis are available. Please contact sga"at"dkrz.de for data request details. See http://sga.wdc-climate.de for more details on CLM simulations in the context of the BMBF funding priority "klimazwei", some useful information on handling climate model data and the data access regulations. The output format is netCDF. Experiment with CLM 2.4.11 on NEC-SX6(hurrikan). raw data: hpss:/dxul/ut/k/k204095/prism/experiments/B1_1 data years < 2060: /dxul/ut/k/k204095/prism/experiments/B1_1/outdata/clm/yearnnnn data years > 2059: /dxul/prj/ir0264/arch/CLM/prism/experiments/B1_1/outdata/clm/yearnnnn

The experiment CLM_B1_1_D2 contains European regional climate simulations of the years 2001-2100 on a rotated grid (CLM non hydrostatic, 0.165 deg. hor. res., see http://www.clm-community.eu ). It is forced by the first (_1_) run of the global IPCC scenario B1 (EH5-T63L31_OM-GR1.5L40_B1_1_6H), which describes a possible future world with global population peaking in mid-century and rapid change in economic structures towards a service and information economy. An introduction of clean and resource efficient technologies was assumed. In data stream 2 (_D2) the output variables of CLM are stored as time series on a rotated grid. The model region starts at -20.8725/-23.7275 (centre of lower left grid box) with rotated North Pole at 39.25/-162.0 (lat/lon). The number of grid points is 255/241 (lat/lon). The sponge zone (numerically unreliable boundary grid points) of the original model output has been cut off. The regional model variables include two-dimensional near surface fields and soil and atmospheric fields on different layers. The soil fields are simulated on 10 different levels with a maximum depth of 15 meters. The atmospheric fields are given on 6 pressure levels (200, 500, 700, 850, 925 and 1000 hPa). The time interval of the output fields ranges from 1 to 3 hours and includes daily output fields, depending on the respective variable. Please contact sga"at"dkrz.de for data request details. See http://sga.wdc-climate.de for more details on CLM simulations in the context of the BMBF funding priority "klimazwei", some useful information on handling climate model data and the data access regulations. The output format is netCDF, experiment with CLM 2.4.11 on NEC-SX6(hurrikan), raw data: /dxul/ut/k/k204095/prism/experiments/B1_1 , /dxul/prj/ir0264/arch/CLM/prism/experiments/B1_1

The experiment CLM_C20_3_D2 contains European regional climate simulations of the years 1960-2000 on a rotated grid (CLM non hydrostatic, 0.165 degree hor. resolution, see http://www.clm-community.eu ). The simulations of the 20th century (1960-2000) have been forced by the third (_3_) run of the global 20th century climate (EH5-T63L31_OM-GR1.5L40_20C_3_6H) with observed anthropogenic forcing. In data stream 2 (_D2) the output variables of CLM are stored as time series on a rotated grid. The model region starts at -20.8725/-23.7275 (lat/lon in rotated coordinates; centre of lower left grid box) with an increment of 0.165 deg. The position of the North Pole in the rotated grid is: 39.25/-162.0 (lat/lon). The number of grid points is 255/241 (lat/lon). The sponge zone (numerically unreliable boundary grid points) of the original model output has been cut off. The regional model variables include two-dimensional near surface fields, as well as soil and atmospheric fields on different layers. The soil fields are simulated on 10 different levels with a maximum depth of 15 meters. The atmospheric fields are given on 6 pressure levels (200, 500, 700, 850, 925 and 1000 hPa). The time interval of the output fields ranges from 1 to 3 hours and includes daily output fields, depending on the respective variables. Please contact sga"at"dkrz.de for data request details. See http://sga.wdc-climate.de for more details on CLM simulations in the context of the BMBF funding priority "klimazwei", some useful information on handling climate model data and the data access regulations. The output format is netCDF Experiment with CLM 2.4.11 on NEC-SX6 (Stuttgart) raw data: /ut/6/k204095/imdi/experiments/C20_3/outdata/clm

The experiment CLM_A1B_1_D2 contains European regional climate simulations of the years 2001-2100 on a rotated grid (CLM non hydrostatic, 0.165 deg. hor. resolution, see http://www.clm-community.eu ). It is forced by the first (_1_) run of the global IPCC scenario A1B (EH5-T63L31_OM-GR1.5L40_A1B_1_6H), which describes a possible future world of very rapid economic growth, global population peaking in mid-century and rapid introduction of new and more efficient technologies with a balance across all energy sources. In data stream 2 (_D2) the output variables of CLM are stored as time series on a rotated grid. The model region starts at -20.8725/-23.7275 (lat/lon in rotated coordinates; centre of lower left grid box) with rotated North Pole at 39.25/-162.0 (lat/lon). The number of grid points is 255/241 (lat/lon). The sponge zone (numerically unreliable boundary grid points) of the original model output has been cut off. The regional model variables include two-dimensional near surface fields, as well as soil and atmospheric fields on different layers. The soil fields are simulated on 10 different levels with a maximum depth of 15 meters. The atmospheric fields are given on 6 pressure levels (200, 500, 700, 850, 925 and 1000 hPa). The time interval of the output fields ranges from 1 to 3 hours and includes daily output fields, depending on the respective variables. Please contact sga"at"dkrz.de for data request details. See http://sga.wdc-climate.de for more details on CLM simulations in the context of the BMBF funding priority "klimazwei", some useful information on handling climate model data and the data access regulations. The output format is netCDF Experiment with CLM 2.4.11 on NEC-SX6(hurrikan) raw data: hpss:/dxul/ut/k/k204095/prism/experiments/A1B_1

The experiment CLM_A1B_ZS contains Northern European regional climate simulations of the years 2070-2099 on a rotated grid (CLM non hydrostatic, 0.44 deg. hor. resolution, see http://www.clm-community.eu ). It is forced by the first (_1_) run of the global IPCC SRES A1B (EH5-T63L31_OM-GR1.5L40_A1B_1_6H), which describes a possible future world of very rapid economic growth, global population peaking in mid-century and rapid introduction of new and more efficient technologies with a balance across all energy sources. The model region starts at -19.36/-40.48 (lat/lon in rotated coordinates; centre of lower left corner of the domain) with rotated North Pole at 21.3/-175.0 (lat/lon). The number of grid points is 80/146 (lat/lon). The sponge zone (numerically unreliable boundary grid points) consists of 8 grid boxes at each border. EH5-T63L31_OM-GR1.5L40_A1B_1_6H were nudged during the simulations (spectral nudging,von Storch, H., A spectral nudging technique for dynamical downscaling purposes. Mon. Wea. Rev, 2000 ) The regional model variables include two-dimensional near surface fields and atmospheric fields on 6 pressure levels (200, 500, 700, 850, 925 and 1000 hPa) for zonal and meridional wind, temperature and pressure. The time interval of the output fields is 3 hours. Please contact sga"at"dkrz.de for data request details. The output format is netCDF. Experiment with CLM 2.4.6 on HPC Cluster ( blizzard ).