The SRES data sets were published by the IPCC in 2000 and classified into four different scenario families (A1, A2, B1, B2). SRES_B2 storyline describes a world in which the emphasis is on local solutions to economic, social and enviromental sustainability. The global population is increasing at a lower rate than A2. It has an intermediate level of economic development and a less rapid and more diverse technological change than in A1 and B1. The Hadley Centre Circulation Model is a 3-dim AOGCM described by (Gordon et al.,2000 and Pope et al.,2000). The atmospheric component has a 19 levels horizontal resolution, comparable with spectral resolution of T42, while the ocean component has a 20 levels resolution. HADCM3 (http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadcm3 ). The changes of anthropogenic emissions of CO2, CH4, N2O and sulphur dioxide are prescribed according to the above mentioned scenario.

The SRES data sets were published by the IPCC in 2000 and classified into four different scenario families (A1, A2, B1, B2). SRES_A2 storyline describes a very heterogeneous world with the underlying theme of self-reliance and preservation of local identities. It results in this scenario a continous increasing population together with a slower economic growth and technological change. The Hadley Centre Circulation Model is a 3-dim AOGCM described by (Gordon et al., 2000 and Pope et al., 2000). The atmospheric component has a 19 levels horizontal resolution, comparable with spectral resolution of T42, while the ocean component has a 20 levels resolution. HADCM3(http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadcm3 ) The changes of anthropogenic emissions of CO2, CH4, N2O and sulphur dioxide are prescribed according to the above mentioned scenario. These data belongs to a set of three ensemble runs, with the HADCM3-model, using the SRES_A2 scenario. They provide monthly averaged values of selected variables for the IPCC-DDC.

The SRES data sets were published by the IPCC in 2000 and classified into four different scenario families (A1, A2, B1, B2). SRES_A2 storyline describes a very heterogeneous world with the underlying theme of self-reliance and preservation of local identities. It results in this scenario a continous increasing population together with a slower economic growth and technological change. The Hadley Centre Circulation Model is a 3-dim AOGCM described by (Gordon et al., 2000 and Pope et al., 2000). The atmospheric component has a 19 levels horizontal resolution, comparable with spectral resolution of T42, while the ocean component has a 20 levels resolution. HADCM3(http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadcm3 ) The changes of anthropogenic emissions of CO2, CH4, N2O and sulphur dioxide are prescribed according to the above mentioned scenario. These data belongs to a set of three ensemble runs, with the HADCM3-model, using the SRES_A2 scenario. They provide monthly averaged values of selected variables for the IPCC-DDC. HadCM3_SRES_A2b and HadCM3_SRES_A2c follow the same experimental design and historical plus future forcings as HadCM3_SRES_A2 (Johns et al. 2003) but starting from initial conditions taken respectively 100 years and 200 years further into the HadCM3 control simulation.

'historical' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 3.2 historical (3.2 Historical) - Version 1: Simulation of recent past (1850 to 2005). Impose changing conditions (consistent with observations). Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

decadals are a group of experiments of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 1.5 decadal (1.5 decadal hindcast/forecast utilizing alternative initializations.) - Version 1: Decadal hindcast/prediction. Comparison of initialization strategies - for example, a repeat of experiment 1.1 using an alternate initialization strategy or alternate initial data. Individual decadal experiments are named decadalXXXX with starting year XXXX. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

'rcp45' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 4.1 rcp45 (4.1 RCP4.5) - Version 1: Future projection (2006-2100) forced by RCP4.5. RCP4.5 is a representative concentration pathway which approximately results in a radiative forcing of 4.5 W m-2 at year 2100, relative to pre-industrial conditions. RCPs are time-dependent, consistent projections of emissions and concentrations of radiatively active gases and particles. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

The SRES data sets were published by the IPCC in 2000 and classified into four different scenario families (A1, A2, B1, B2). SRES_A2 storyline describes a very heterogeneous world with the underlying theme of self-reliance and preservation of local identities. It results in this scenario a continous increasing population together with a slower economic growth and technological change. The Hadley Centre Circulation Model is a 3-dim AOGCM described by (Gordon et al., 2000 and Pope et al., 2000). The atmospheric component has a 19 levels horizontal resolution, comparable with spectral resolution of T42, while the ocean component has a 20 levels resolution. HADCM3(http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadcm3 ) The changes of anthropogenic emissions of CO2, CH4, N2O and sulphur dioxide are prescribed according to the above mentioned scenario. These data belongs to a set of three ensemble runs, with the HADCM3-model, using the SRES_A2 scenario. They provide monthly averaged values of selected variables for the IPCC-DDC. HadCM3_SRES_A2b and HadCM3_SRES_A2c follow the same experimental design and historical plus future forcings as HadCM3_SRES_A2 (Johns et al. 2003) but starting from initial conditions taken respectively 100 years and 200 years further into the HadCM3 control simulation.

The SRES data sets were published by the IPCC in 2000 and classified into four different scenario families (A1, A2, B1, B2). SRES_A2 storyline describes a very heterogeneous world with the underlying theme of self-reliance and preservation of local identities. It results in this scenario a continous increasing population together with a slower economic growth and technological change. The Hadley Centre Circulation Model is a 3-dim AOGCM described by (Gordon et al., 2000 and Pope et al., 2000). The atmospheric component has a 19 levels horizontal resolution, comparable with spectral resolution of T42, while the ocean component has a 20 levels resolution. HADCM3(http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadcm3 ) The changes of anthropogenic emissions of CO2, CH4, N2O and sulphur dioxide are prescribed according to the above mentioned scenario. These data belongs to a set of three ensemble runs, with the HADCM3-model, using the SRES_A2 scenario. They provide monthly averaged values of selected variables for the IPCC-DDC. HadCM3_SRES_A2b and HadCM3_SRES_A2c follow the same experimental design and historical plus future forcings as HadCM3_SRES_A2 (Johns et al. 2003) but starting from initial conditions taken respectively 100 years and 200 years further into the HadCM3 control simulation.

The SRES data sets were published by the IPCC in 2000 and classified into four different scenario families (A1, A2, B1, B2). SRES_A2 storyline describes a very heterogeneous world with the underlying theme of self-reliance and preservation of local identities. It results in this scenario a continous increasing population together with a slower economic growth and technological change. The Hadley Centre Circulation Model is a 3-dim AOGCM described by (Gordon et al., 2000 and Pope et al., 2000). The atmospheric component has a 19 levels horizontal resolution, comparable with spectral resolution of T42, while the ocean component has a 20 levels resolution. HADCM3(http://www.metoffice.gov.uk/research/modelling-systems/unified-model/climate-models/hadcm3 ) The changes of anthropogenic emissions of CO2, CH4, N2O and sulphur dioxide are prescribed according to the above mentioned scenario. These data belongs to a set of three ensemble runs, with the HADCM3-model, using the SRES_A2 scenario. They provide monthly averaged values of selected variables for the IPCC-DDC. HadCM3_SRES_A2b and HadCM3_SRES_A2c follow the same experimental design and historical plus future forcings as HadCM3_SRES_A2 (Johns et al. 2003) but starting from initial conditions taken respectively 100 years and 200 years further into the HadCM3 control simulation.

'rcp45' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 4.1 rcp45 (4.1 RCP4.5) - Version 1: Future projection (2006-2100) forced by RCP4.5. RCP4.5 is a representative concentration pathway which approximately results in a radiative forcing of 4.5 W m-2 at year 2100, relative to pre-industrial conditions. RCPs are time-dependent, consistent projections of emissions and concentrations of radiatively active gases and particles. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.