An ensemble of bias adjusted regional climate model simulations based on EURO-CORDEX (CORDEX-EUR11). The data set covers daily temperature (minimum, average and maximum) and precipitation for historical, rcp26, rcp45 and rcp85 experiments covering a period from 1971 to 2100. In total 8 different RCMs from 8 institutes are included in the data set. ISIMIP3BASD v2.4.1 (https://doi.org/10.5281/zenodo.4686991) method was used for bias adjustment. The method is based on a parametric quantile mapping, including trend preservation of each quantile. Bias adjustment was performed for each variable separately. We used E-OBS v19.0e (https://doi.org/10.1029/2017JD028200) data to calibrate the bias adjustment transfer functions for the period 1971 to 2005. We acknowledge the World Climate Research Programme's Working Group on Regional Climate, and the Working Group on Coupled Modelling, former coordinating body of CORDEX and responsible panel for CMIP5. We also thank the climate modelling groups (CLMcom, DMI, GERICS, IPSL-INERIS, KNMI, MPI-CSC, SMHI and UHOH) for producing and making available their model output. We also acknowledge the Earth System Grid Federation infrastructure an international effort led by the U.S. Department of Energy's Program for Climate Model Diagnosis and Intercomparison, the European Network for Earth System Modelling and other partners in the Global Organisation for Earth System Science Portals (GO-ESSP). The data was developed and utilized within the Clim4Vitis (https://clim4vitis.eu), ProgRAMM and OptAKlim projects. The project is supported by funds of the Federal Ministry of Food and Agriculture (BMEL) based on a decision of the Parliament of the Federal Republic of Germany via the Federal Office for Agriculture and Food (BLE) under the innovation support programme. ProgRAMM: 281B204516 OptAKlim: 281B203216

The CCH project (Climate Change and Health in sub-Saharan Africa, https://cch-africa.de) focuses on the rising health impacts of climate change, particularly in sub-Saharan Africa where vulnerable populations are most at risk. Despite the urgency, there has been little collaboration across disciplines to assess these effects or develop effective adaptation strategies. Key health challenges - childhood undernutrition, malaria, and cardiovascular dysfunction—remain under-researched in the context of climate change. As part of this experiment, we generated a global dataset of Wet-Bulb Globe Temperature (WBGT) projections to serve as a bioclimatic indicator for quantifying the potential health impacts of climate change. An ensemble of daily average WBGT estimates based on the primary and secondary ISIMIP3b (https://www.isimip.org) model ensemble (10 models) is provided. The ensemble includes the historical (1850–2014), SSP1-2.6 (2015–2100), SSP3-7.0 (2015–2100), and SSP5-8.5 (2015–2100) experiments. WBGT was estimated on an hourly basis using the PyWBGT Python package (Kong and Huber, 2022, doi:10.1029/2021EF002334), based on the Liljegren method (Liljegren et al., 2008, doi:10.1080/15459620802310770). This method estimates WBGT from 2 m air temperature (tas), near-surface relative humidity (hurs), surface pressure (ps), 10 m wind speed (sfcWind), and surface downward solar radiation (rsds). Hourly values were derived from daily values using an average diurnal cycle calculated separately for each Julian day. WBGT was estimated for each hour and then averaged to obtain daily values. The dataset covers the entire globe, excluding Antarctica. The following 10 models from the ISIMIP3b projects are used: CanESM5 - r1i1p1f1 CNRM-CM6-1 - r1i1p1f2 CNRM-ESM2-1 - r1i1p1f2 EC-Earth3 - r1i1p1f1 GFDL-ESM4 - r1i1p1f1 IPSL-CM6A-LR - r1i1p1f1 MIROC6 - r1i1p1f1 MPI-ESM1-2-HR - r1i1p1f1 MRI-ESM2-0 - r1i1p1f1 UKESM1-0-LL - r1i1p1f2

The experiment CLM_C20_1_D3 contains European regional climate simulations of the years 1960-2000 on a regular geographical grid. The data are generated during post processing of the corresponding data stream 2 experiment (CLM_C20_1_D2) of regional climate model runs (CLM non hydrostatic, see http://www.clm-community.eu ). The simulations of the 20th century (1960-2000) have been forced by the first (_1_) run of the global 20th century climate (EH5-T63L31_OM-GR1.5L40_20C_1_6H) with observed anthropogenic forcing. In data stream 3 (_D3) the output variables of CLM data stream 2 and some additionally derived parameters are stored as time series on a regular grid with a horizontal spacing of 0.2 degree. The model parameters have been transformed onto the regular geographical grid by the CDO routines. Please note, that none of the variables has been corrected for topographical differences between the two grids. The model domain of data stream 3 covers the European region starting at 34.6/-10.6 (lat/lon, centre of lower left grid box) with an increment of 0.2 degree. The number of grid points is 177/238 (lat/lon). For some model variables and additionally derived parameters some statistics on daily, monthly or yearly basis are available. See also http://sga.wdc-climate.de for a list of available parameters. Please contact sga"at"dkrz.de for data request details. See http://sga.wdc-climate.de for more details on CLM simulations in the context of the BMBF funding priority "klimazwei", some useful information on handling climate model data and the data access regulations. The output format is netCDF Experiment with CLM 2.4.11 on NEC-SX6(hurrikan) raw data: hpss:/dxul/ut/k/k204095/prism/experiments/C20_1

The experiment CLM_C20_2_D2 contains European regional climate simulations of the years 1960-2000 on a rotated grid (CLM non hydrostatic, 0.165 degree hor. resolution, see http://www.clm-community.eu ). The simulations of the 20th century (1960-2000) have been forced by the second (_2_) run of the global 20th century climate (EH5-T63L31_OM-GR1.5L40_20C_2_6H) with observed anthropogenic forcing. In data stream 2 (_D2) the output variables of CLM are stored as time series on a rotated grid. The model region starts at -20.8725/-23.7275 (lat/lon in rotated coordinates; centre of lower left grid box) with an increment of 0.165 degree. The position of the North Pole in the rotated grid is: 39.25/-162.0 (lat/lon). The number of grid points is 255/241 (lat/lon). The sponge zone (numerically unreliable boundary grid points) of the original model output has been cut off. The regional model variables include two-dimensional near surface fields, as well as soil and atmospheric fields on different layers. The soil fields are simulated on 10 different levels with a maximum depth of 15 meters. The atmospheric fields are given on 6 pressure levels (200, 500, 700, 850, 925 and 1000 hPa). The time interval of the output fields ranges from 1 to 3 hours and includes daily output fields, depending on the respective variables. Please contact sga"at"dkrz.de for data request details. See http://sga.wdc-climate.de for more details on CLM simulations in the context of the BMBF funding priority "klimazwei", some useful information on handling climate model data and the data access regulations. The output format is netCDF Experiment with CLM 2.4.11 on NEC-SX6(hurrikan) raw data: hpss:/dxul/ut/k/k204095/prism/experiments/C20_2

The experiment CLM_C20_3_D2 contains European regional climate simulations of the years 1960-2000 on a rotated grid (CLM non hydrostatic, 0.165 degree hor. resolution, see http://www.clm-community.eu ). The simulations of the 20th century (1960-2000) have been forced by the third (_3_) run of the global 20th century climate (EH5-T63L31_OM-GR1.5L40_20C_3_6H) with observed anthropogenic forcing. In data stream 2 (_D2) the output variables of CLM are stored as time series on a rotated grid. The model region starts at -20.8725/-23.7275 (lat/lon in rotated coordinates; centre of lower left grid box) with an increment of 0.165 deg. The position of the North Pole in the rotated grid is: 39.25/-162.0 (lat/lon). The number of grid points is 255/241 (lat/lon). The sponge zone (numerically unreliable boundary grid points) of the original model output has been cut off. The regional model variables include two-dimensional near surface fields, as well as soil and atmospheric fields on different layers. The soil fields are simulated on 10 different levels with a maximum depth of 15 meters. The atmospheric fields are given on 6 pressure levels (200, 500, 700, 850, 925 and 1000 hPa). The time interval of the output fields ranges from 1 to 3 hours and includes daily output fields, depending on the respective variables. Please contact sga"at"dkrz.de for data request details. See http://sga.wdc-climate.de for more details on CLM simulations in the context of the BMBF funding priority "klimazwei", some useful information on handling climate model data and the data access regulations. The output format is netCDF Experiment with CLM 2.4.11 on NEC-SX6 (Stuttgart) raw data: /ut/6/k204095/imdi/experiments/C20_3/outdata/clm

The experiment CLM_A1B_1_D2 contains European regional climate simulations of the years 2001-2100 on a rotated grid (CLM non hydrostatic, 0.165 deg. hor. resolution, see http://www.clm-community.eu ). It is forced by the first (_1_) run of the global IPCC scenario A1B (EH5-T63L31_OM-GR1.5L40_A1B_1_6H), which describes a possible future world of very rapid economic growth, global population peaking in mid-century and rapid introduction of new and more efficient technologies with a balance across all energy sources. In data stream 2 (_D2) the output variables of CLM are stored as time series on a rotated grid. The model region starts at -20.8725/-23.7275 (lat/lon in rotated coordinates; centre of lower left grid box) with rotated North Pole at 39.25/-162.0 (lat/lon). The number of grid points is 255/241 (lat/lon). The sponge zone (numerically unreliable boundary grid points) of the original model output has been cut off. The regional model variables include two-dimensional near surface fields, as well as soil and atmospheric fields on different layers. The soil fields are simulated on 10 different levels with a maximum depth of 15 meters. The atmospheric fields are given on 6 pressure levels (200, 500, 700, 850, 925 and 1000 hPa). The time interval of the output fields ranges from 1 to 3 hours and includes daily output fields, depending on the respective variables. Please contact sga"at"dkrz.de for data request details. See http://sga.wdc-climate.de for more details on CLM simulations in the context of the BMBF funding priority "klimazwei", some useful information on handling climate model data and the data access regulations. The output format is netCDF Experiment with CLM 2.4.11 on NEC-SX6(hurrikan) raw data: hpss:/dxul/ut/k/k204095/prism/experiments/A1B_1

The experiment CLM_B1_2_D2 contains European regional climate simulations of the years 2001-2100 on a rotated grid (CLM non hydrostatic, 0.165 deg. hor. res., see http://www.clm-community.eu ). It is forced by the second (_2_) run of the global IPCC scenario B1 (EH5-T63L31_OM-GR1.5L40_B1_2_6H), which describes a possible future world with global population peaking in mid-century and rapid change in economic structures towards a service and information economy. An introduction of clean and resource efficient technologies was assumed. In data stream 2 (_D2) the output variables of CLM are stored as time series on a rotated grid. The model region starts at -20.8725/-23.7275 (lat/lon in rotated coordinates; centre of lower left grid box) with rotated North Pole at 39.25/-162.0 (lat/lon). The number of grid points is 255/241 (lat/lon). The sponge zone (numerically unreliable boundary grid points) of the original model output has been cut off. The regional model variables include two-dimensional near surface fields, as well as soil and atmospheric fields on different layers. The soil fields are simulated on 10 different levels with a maximum depth of 15 meters. The atmospheric fields are given on 6 pressure levels (200, 500, 700, 850, 925 and 1000 hPa). The time interval of the output fields ranges from 1 to 3 hours and includes daily output fields, depending on the respective variables. Please contact sga"at"dkrz.de for data request details. See http://sga.wdc-climate.de for more details on CLM simulations in the context of the BMBF funding priority "klimazwei", some useful information on handling climate model data and the data access regulations. The output format is netCDF Experiment with CLM 2.4.11 on NEC-SX6(hurrikan) raw data: hpss:/dxul/ut/k/k204095/prism/experiments/B1_2

The experiment CLM_B1_2_D3 contains European regional climate simulations of the years 2001-2100 on a regular geographical grid. The data are generated during post processing of the corresponding data stream 2 experiment (CLM_B1_2_D2) of regional climate model runs (CLM non hydrostatic, see http://www.clm-community.eu ). It is forced by the second (_2_) run of the global IPCC scenario B1 (EH5-T63L31_OM-GR1.5L40_B1_2_6H), which describes a possible future world with global population peaking in mid-century and rapid change in economic structures towards a service and information economy. An introduction of clean and resource efficient technologies was assumed. In data stream 3 (_D3) the output variables of CLM data stream 2 and some additionally derived parameters are stored as time series on a regular geograhical grid (0.2 deg. hor. res.). The transformation has been done via CDO routines. Please note, that none of the variables has been corrected for topographical differences between the two grids. The model domain of data stream 3 covers the European region starting at 34.6/-10.6 (lat/lon, centre of lower left grid box) with an increment of 0.2 degree. The number of grid points is 177/238 (lat/lon). For some model variables and additionally derived parameters some statistics on daily, monthly or yearly basis are available. See also http://sga.wdc-climate.de for a list of available parameters. Please contact sga"at"dkrz.de for data request details. See http://sga.wdc-climate.de for more details on CLM simulations in the context of the BMBF funding priority "klimazwei", some useful information on handling climate model data and the data access regulations. The output format is netCDF Experiment with CLM 2.4.11 on NEC-SX6(hurrikan) raw data: hpss:/dxul/ut/k/k204095/prism/experiments/B1_2

The experiment CLM_B1_1_D2 contains European regional climate simulations of the years 2001-2100 on a rotated grid (CLM non hydrostatic, 0.165 deg. hor. res., see http://www.clm-community.eu ). It is forced by the first (_1_) run of the global IPCC scenario B1 (EH5-T63L31_OM-GR1.5L40_B1_1_6H), which describes a possible future world with global population peaking in mid-century and rapid change in economic structures towards a service and information economy. An introduction of clean and resource efficient technologies was assumed. In data stream 2 (_D2) the output variables of CLM are stored as time series on a rotated grid. The model region starts at -20.8725/-23.7275 (centre of lower left grid box) with rotated North Pole at 39.25/-162.0 (lat/lon). The number of grid points is 255/241 (lat/lon). The sponge zone (numerically unreliable boundary grid points) of the original model output has been cut off. The regional model variables include two-dimensional near surface fields and soil and atmospheric fields on different layers. The soil fields are simulated on 10 different levels with a maximum depth of 15 meters. The atmospheric fields are given on 6 pressure levels (200, 500, 700, 850, 925 and 1000 hPa). The time interval of the output fields ranges from 1 to 3 hours and includes daily output fields, depending on the respective variable. Please contact sga"at"dkrz.de for data request details. See http://sga.wdc-climate.de for more details on CLM simulations in the context of the BMBF funding priority "klimazwei", some useful information on handling climate model data and the data access regulations. The output format is netCDF, experiment with CLM 2.4.11 on NEC-SX6(hurrikan), raw data: /dxul/ut/k/k204095/prism/experiments/B1_1 , /dxul/prj/ir0264/arch/CLM/prism/experiments/B1_1

The experiment CLM_A1B_2_D3 contains European regional climate simulations of the years 2001-2100 on a regular geographical grid. The data are generated during post processing of the corresponding data stream 2 experiment (CLM_A1B_2_D2) of regional climate model runs (CLM non hydrostatic, see http://www.clm-community.eu ). It is forced by the second (_2_) run of the global IPCC scenario A1B (EH5-T63L31_OM-GR1.5L40_A1B_2_6H), which describes a possible future world of very rapid economic growth, global population peaking in mid-century and rapid introduction of new and more efficient technologies with a balance across all energy sources. In data stream 3 (_D3) the output variables of CLM data stream 2 and some additionally derived parameters are stored as time series on a regular geograhical grid (0.2 deg. hor. res.). The transformation has been done via CDO routines. Please note, that none of the variables has been corrected for topographical differences between the two grids. The model domain of data stream 3 covers the European region starting at 34.6/-10.6 (lat/lon, centre of lower left grid box) with an increment of 0.2 degree. The number of grid points is 177/238 (lat/lon). For some model variables and additionally derived parameters some statistics on daily, monthly or yearly basis are available. See also http://sga.wdc-climate.de for a list of available parameters. Please contact sga"at"dkrz.de for data request details. See http://sga.wdc-climate.de for more details on CLM simulations in the context of the BMBF funding priority "klimazwei", some useful information on handling climate model data and the data access regulations. The output format is netCDF Experiment with CLM 2.4.11 on NEC-SX6(hurrikan) raw data: hpss:/dxul/ut/k/k204095/prism/experiments/A1B_2