• My GeoNetwork catalogue
  •   Search
  •   Map
  •   Sign in

PRIMAVERA: Eddy Rich version of the Max Planck Institute Earth System Model (MPI-ESM1.2-ER) - 1950-control run

The MPI-ESM1.2-ER configuration is designed to facilitate research on ocean eddies that are explicitly resolved. The 1950-control simulation, spans 200 years for ocean and 100 years for the atmosphere, forced by fixed-1950 GHG-forcing. This includes fixed orbital parameters, solar irradiance averaged over a solar cycle, greenhouse gas concentrations, and ozone concentrations. The simulation excludes volcanic aerosol forcing and focuses on tropospheric natural aerosols.


The MPI-ESM1.2-ER climate model includes the following components:

aerosol: none,

prescribed MACv2-SP,

atmos: ECHAM6.3 (spectral T127/L95; 384 × 192 longitude/latitude; 95 levels; top level 0.01 hPa),

land: none,

landIce: none/prescribed,

ocean: MPIOM1.63 (TP6M, approximately 0.1deg; 3602x2394 longitude/latitude; 40 levels; top grid cell 0-6 m),

ocnBgchem: none,

seaIce: unnamed (thermodynamic (Semtner zero-layer) dynamic (Hibler 79) sea ice model).


The model was run by the Max Planck Institute for Meteorology, Hamburg 20146, Germany (MPI-M) in native nominal resolutions:

aerosol: 100 km,

atmos: 100 km,

land: none,

landIce: none,

ocean: 10 km,

ocnBgchem: none,

seaIce: 10 km.


MPI-ESM-ER is a coupled climate model that is conducted following the HighResMIP protocol. Atmospheric component (ECHAM6.3) and ocean component (MPIOM) of the MPI-ESM-ER are coupled with a coupling frequency of 1hr (via OASIS3 coupler). MPI-ESM-ER includes dynamic vegetation, and interactive carbon cycle, as well as advanced representations of atmosphere and ocean processes (Stevens et al., 2013).

Simple

Date (Publication)
2024-09-18
Edition

1

Citation identifier
PRIMAVERA_ctrl
Citation identifier
doi:10.26050/WDCC/PRIMAVERA_ctrl
Principal investigator
  Max Planck Institute for Meteorology - Dr. Dian Putrasahan
https://mpimet.mpg.de/
Author
  Max Planck Institute for Meteorology - Dr. Dian Putrasahan
https://mpimet.mpg.de/
Author
  Max Planck Institute for Meteorology - Dr. Oliver Gutjahr
https://mpimet.mpg.de/
Author
  Max Planck Institute for Meteorology - Dr. Helmuth Haak
http://www.mpimet.mpg.de/
Author
  Max Planck Institute for Meteorology - Dr. Johann Jungclaus
http://www.mpimet.mpg.de/
Author
  Max Planck Institute for Meteorology - Katja Lohmann
http://www.mpimet.mpg.de/
Author
  Max Planck Institute for Meteorology - Dr. Jin-Song von Storch
http://www.mpimet.mpg.de/
Author
  Deutsches Klimarechenzentrum - Dr. Chathurika Wickramage
http://www.dkrz.de/
Publisher
  WDCC
Point of contact
  Max Planck Institute for Meteorology - Dr. Dian Putrasahan
https://mpimet.mpg.de/
Name

NetCDF

Keywords
  • 1950-control simulation

Keywords
  • MPI-ESM

Keywords
  • PRIMAVERA

Use limitation

CC-BY-4.0: Creative Commons Attribution 4.0 International https://creativecommons.org/licenses/by/4.0/

Language

eng; USA

N
S
E
W
thumbnail


Begin date
1980-01-01
End date
2179-12-31
Supplemental Information

info:eu-repo/grantAgreement/EC/H2020/641727/BE//PRIMAVERA

Distribution format
  • NetCDF ()

Transfer size
8793774
OnLine resource
https://www.wdc-climate.de/ui/entry?acronym=PRIMAVERA_ctrl
Hierarchy level
collection
Attribute description
upward_sea_water_velocity
Descriptor

upward_sea_water_velocity [CF-Standard Name]; unit: m s-1

Attribute description
ocean_barotropic_mass_streamfunction
Descriptor

Ocean Barotropic Mass Streamfunction [CF-Standard Name]; unit: kg s-1

Attribute description
surface_downward_sensible_heat_flux
Descriptor

The surface called "surface" means the lower boundary of the atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). The surface sensible heat flux, also called "turbulent" heat flux, is the exchange of heat between the surface and the air by motion of air. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

Attribute description
toa_net_downward_longwave_flux_assuming_clear_sky
Descriptor

A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation. "toa" means top of atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

Attribute description
cloud_area_fraction
Descriptor

"X_area_fraction" means the fraction of horizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". The cloud area fraction is for the whole atmosphere column, as seen from the surface or the top of the atmosphere. The cloud area fraction in a layer of the atmosphere has the standard name cloud_area_fraction_in_atmosphere_layer. [CF-Standard Name]; unit: 1

Attribute description
air_pressure
Descriptor

air_pressure [CF-Standard Name]; unit: Pa

Attribute description
snowfall_flux
Descriptor

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

Attribute description
wind_speed
Descriptor

Speed is the magnitude of velocity. Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) The wind speed is the magnitude of the wind velocity.[CF-Standard Name]; unit: m/s

Attribute description
convective_precipitation_flux
Descriptor

In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

Attribute description
vertically_integrated_water_vapor
Descriptor

not filled; unit: kg m-2

Attribute description
sea_water_y_velocity
Descriptor

A velocity is a vector quantity. "y" indicates a vector component along the grid y-axis, positive with increasing y. [CF-Standard Name]; unit: m s-1

Attribute description
sea_water_potential_density
Descriptor

Sea Water Potential Density [CF-Standard Name]; unit: kg m-3

Attribute description
atmosphere_mass_content_of_cloud_liquid_water
Descriptor

"Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. [CF-Standard Name]; unit: kg m-2

Attribute description
specific_humidity
Descriptor

"specific" means per unit mass. Specific humidity is the mass fraction of water vapor in (moist) air.[CF-Standard Name]; unit: kg/kg

Attribute description
surface_net_downward_heat_flux_where_sea
Descriptor

not filled; unit: W m-2

Attribute description
sea_water_potential_temperature_expressed_as_heat_content
Descriptor

not filled; unit: J m-2

Attribute description
air_temperature
Descriptor

Air temperature is the bulk temperature of the air, not the surface (skin) temperature. [CF-Standard Name]; unit: K

Attribute description
toa_net_downward_shortwave_flux_assuming_clear_sky
Descriptor

A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "shortwave" means shortwave radiation. "toa" means top of atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

Attribute description
air_pressure_at_mean_sea_level
Descriptor

Air pressure at sea level is the quantity often abbreviated as MSLP or PMSL. Air pressure is the force per unit area which would be exerted when the moving gas molecules of which the air is composed strike a theoretical surface of any orientation. "Mean sea level" means the time mean of sea surface elevation at a given location over an arbitrary period sufficient to eliminate the tidal signals. [CF-Standard Name]; unit: Pa

Attribute description
minus_one_times_surface_upwelling_shortwave_flux_in_air
Descriptor

"Minus one times" means that the quantity described takes the opposite sign convention to that for the quantity which has the same standard name apart from this phrase, i.e. the two quantities differ from one another by a factor of -1. The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

Attribute description
surface_downward_northward_stress
Descriptor

The surface called "surface" means the lower boundary of the atmosphere. "Northward" indicates a vector component which is positive when directed northward (negative southward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward northward" indicates the ZY component of a tensor. A downward northward stress is a downward flux of northward momentum, which accelerates the lower medium northward and the upper medium southward. The surface downward stress is the windstress on the surface. [CF-Standard Name]; unit: Pa

Attribute description
water_evaporation_flux
Descriptor

"Water" means water in all phases. Evaporation is the conversion of liquid or solid into vapor. (The conversion of solid alone into vapor is called "sublimation".) In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

Attribute description
surface_downward_eastward_stress
Descriptor

The surface called "surface" means the lower boundary of the atmosphere. "Eastward" indicates a vector component which is positive when directed eastward (negative westward). "Downward" indicates a vector component which is positive when directed downward (negative upward). "Downward eastward" indicates the ZX component of a tensor. A downward eastward stress is a downward flux of eastward momentum, which accelerates the lower medium eastward and the upper medium westward. The surface downward stress is the windstress on the surface. [CF-Standard Name]; unit: Pa

Attribute description
ocean_mixed_layer_thickness_defined_by_sigma_t
Descriptor

Ocean Mixed Layer Thickness Defined by Sigma T [CF-Standard Name]; unit: m

Attribute description
surface_downward_y_stress
Descriptor

surface_downward_y_stress [CF-Standard Name]; unit: N m-2

Attribute description
water_flux_into_ocean
Descriptor

water_flux_into_ocean [CF-Standard Name]; unit: m s-1

Attribute description
sea_water_x_velocity
Descriptor

A velocity is a vector quantity. "x" indicates a vector component along the grid x-axis, positive with increasing x. [CF-Standard Name]; unit: m s-1

Attribute description
geopotential_height
Descriptor

Geopotential is the sum of the specific gravitational potential energy relative to the geoid and the specific centripetal potential energy. Geopotential height is the geopotential divided by the standard acceleration due to gravity. It is numerically similar to the altitude (or geometric height) and not to the quantity with standard name height, which is relative to the surface. [CF-Standard Name]; unit: m

Attribute description
minus_one_times_toa_outgoing_shortwave_flux
Descriptor

"Minus one times" means that the quantity described takes the opposite sign convention to that for the quantity which has the same standard name apart from this phrase, i.e. the two quantities differ from one another by a factor of -1. Shortwave means shortwave radiation. "toa" means top of atmosphere. The TOA outgoing shortwave flux is the reflected and scattered solar radiative flux i.e. the "upwelling" TOA shortwave flux, sometimes called the "outgoing shortwave radiation" or "OSR". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

Attribute description
sea_water_salinity
Descriptor

sea_water_salinity [CF-Standard Name]; unit: 1e-3

Attribute description
sea_surface_height_above_geoid
Descriptor

sea_surface_height_above_geoid [CF-Standard Name]; unit: m

Attribute description
lagrangian_tendency_of_air_pressure
Descriptor

"tendency_of_X" means derivative of X with respect to time. The Lagrangian tendency of a quantity is its rate of change following the motion of the fluid, also called the "material derivative" or "convective derivative". The Lagrangian tendency of air pressure, often called "omega", plays the role of the upward component of air velocity when air pressure is being used as the vertical coordinate. If the vertical air velocity is upwards, it is negative when expressed as a tendency of air pressure; downwards is positive.[CF-Standard Name]; unit: Pa/s

Attribute description
cloud_ice_mixing_ratio
Descriptor

Mixing ratio of a parcel of ice in air is the ratio of the mass of ice to the mass of dry air. [CF-Standard Name]; unit: kg/kg

Attribute description
maximum_height_of_convective_cloud_tops
Descriptor

not filled; unit: Pa

Attribute description
surface_net_downward_longwave_flux
Descriptor

The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

Attribute description
surface_downward_x_stress
Descriptor

surface_downward_x_stress [CF-Standard Name]; unit: N m-2

Attribute description
relative_humidity
Descriptor

relative_humidity [CF-Standard Name]; unit: fraction

Attribute description
dew_point_temperature
Descriptor

Dew point temperature is the temperature at which a parcel of air reaches saturation upon being cooled at constant pressure and specific humidity. [CF-Standard Name]; unit: K

Attribute description
surface_net_downward_shortwave_flux_assuming_clear_sky
Descriptor

The surface called "surface" means the lower boundary of the atmosphere. A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "shortwave" means shortwave radiation. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

Attribute description
atmosphere_mass_content_of_cloud_ice
Descriptor

Content" indicates a quantity per unit area. The "atmosphere content" of a quantity refers to the vertical integral from the surface to the top of the atmosphere. For the content between specified levels in the atmosphere, standard names including content_of_atmosphere_layer are used. [CF-Standard Name]; unit: kg m-2

Attribute description
surface_air_pressure
Descriptor

The surface called "surface" means the lower boundary of the atmosphere.[CF-Standard Name]; unit: Pa

Attribute description
sea_ice_area_fraction
Descriptor

sea_ice_area_fraction [CF-Standard Name]; unit: 1

Attribute description
sea_surface_temperature
Descriptor

Sea surface temperature is usually abbreviated as "SST". It is the temperature of sea water near the surface (including the part under sea-ice, if any), and not the skin temperature, whose standard name is surface_temperature. For the temperature of sea water at a particular depth or layer, a data variable of sea_water_temperature with a vertical coordinate axis should be used. [CF-Standard Name]; unit: degC

Attribute description
toa_incoming_shortwave_flux
Descriptor

"shortwave" means shortwave radiation. "toa" means top of atmosphere. The TOA incoming shortwave flux is the radiative flux from the sun i.e. the "downwelling" TOA shortwave flux. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

Attribute description
cloud_area_fraction_in_atmosphere_layer
Descriptor

"Layer" means any layer with upper and lower boundaries that have constant values in some vertical coordinate. There must be a vertical coordinate variable indicating the extent of the layer(s). If the layers are model layers, the vertical coordinate can be model_level_number, but it is recommended to specify a physical coordinate (in a scalar or auxiliary coordinate variable) as well. "X_area_fraction" means the fraction ofhorizontal area occupied by X. "X_area" means the horizontal area occupied by X within the grid cell. Cloud area fraction is also called "cloud amount" and "cloud cover". [CF-Standard Name]; unit: 1

Attribute description
northward_wind
Descriptor

"Northward" indicates a vector component which is positive when directed northward (negative southward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m/s

Attribute description
surface_downward_latent_heat_flux
Descriptor

The surface called "surface" means the lower boundary of the atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). The surface latent heat flux is the exchange of heat between the surface and the air on account of evaporation (including sublimation). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

Attribute description
surface_net_downward_longwave_flux_assuming_clear_sky
Descriptor

The surface called "surface" means the lower boundary of the atmosphere. A phrase assuming_condition indicates that the named quantity is the value which would obtain if all aspects of the system were unaltered except for the assumption of the circumstances specified by the condition. "longwave" means longwave radiation. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

Attribute description
toa_net_downward_longwave_flux
Descriptor

"longwave" means longwave radiation. "toa" means top of atmosphere. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

Attribute description
sea_water_potential_temperature
Descriptor

sea_water_potential_temperature [CF-Standard Name]; unit: degC

Attribute description
sea_ice_volume_per_area
Descriptor

not filled; unit: m

Attribute description
sea_surface_salinity
Descriptor

The unit of salinity is PSU, which is dimensionless. The units attribute should be given as 1e-3 or 0.001 i.e. parts per thousand if salinity is in PSU. Sea surface salinity is often abbreviated as "SSS". For the salinity of sea water at a particular depth or layer, a data variable of sea_water_salinity with a vertical coordinate axis should be used. [CF-Standard Name]; unit: 1e-3

Attribute description
minus_one_times_surface_upwelling_longwave_flux_in_air
Descriptor

"Minus one times" means that the quantity described takes the opposite sign convention to that for the quantity which has the same standard name apart from this phrase, i.e. the two quantities differ from one another by a factor of -1. The surface called "surface" means the lower boundary of the atmosphere. "longwave" means longwave radiation. Upwelling radiation is radiation from below. It does not mean "net upward". When thought of as being incident on a surface, a radiative flux is sometimes called "irradiance". In addition, it is identical with the quantity measured by a cosine-collector light-meter and sometimes called "vector irradiance". In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: W m-2

Attribute description
surface_net_downward_shortwave_flux
Descriptor

The surface called "surface" means the lower boundary of the atmosphere. "shortwave" means shortwave radiation. "Downward" indicates a vector component which is positive when directed downward (negative upward). Net downward radiation is the difference between radiation from above (downwelling) and radiation from below (upwelling). In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics.[CF-Standard Name]; unit: W m-2

Attribute description
cloud_liquid_water_mixing_ratio
Descriptor

Mixing ratio of a parcel of liquid water in air is the ratio of the mass of liquid water to the mass of dry air. [CF-Standard Name]; unit: kg/kg

Attribute description
eastward_wind
Descriptor

"Eastward" indicates a vector component which is positive when directed eastward (negative westward). Wind is defined as a two-dimensional (horizontal) air velocity vector, with no vertical component. (Vertical motion in the atmosphere has the standard name upward_air_velocity.) [CF-Standard Name]; unit: m/s

Attribute description
stratiform_precipitation_flux
Descriptor

Stratiform precipitation, whether liquid or frozen, is precipitation that formed in stratiform cloud. "Precipitation" in the earths atmosphere means precipitation of water in all phases. In accordance with common usage in geophysical disciplines, "flux" implies per unit area, called "flux density" in physics. [CF-Standard Name]; unit: kg m-2 s-1

Attribute description
surface_temperature
Descriptor

The surface called "surface" means the lower boundary of the atmosphere. The surface temperature is the (skin) temperature at the interface, not the bulk temperature of the medium above or below. [CF-Standard Name]; unit: K

File identifier
wdc-climate.de:5275524 XML
Metadata language

eng; USA

Hierarchy level
collection
Hierarchy level name

PRIMAVERA_ctrl

Date stamp
2026-02-04T10:21:32
Metadata standard name

ISO 19115

Metadata standard version

ISO 19115-2:2009

Point of contact
  Deutsches Klimarechenzentrum - Dr. Chathurika Wickramage
http://www.dkrz.de/
Point of contact
  Max Planck Institute for Meteorology - Dr. Dian Putrasahan
https://mpimet.mpg.de/
 
 

Overviews

Spatial extent

N
S
E
W
thumbnail


Keywords


Provided by

logo
Access to the portal
Read here the full details and access to the data.

Associated resources

Not available


  •   About
  •   Github
  •