The period of permanent measurement was : 1st July - 31 July 2007 The measured parameters are : Air pressure, air temperature, relative humidity, wind speed and direction, position. The operation was effective during IOP, up to 6 soundings a day. Near the village of Meistratzheim, 20 km south_westward of Strasbourg. The platform on the site of Niederrott is installed just between 2 types of vegetation : Maize on the west and short grass on the east part.

The two energy balance station run by Meteo-France/CNRM measured high-frequency (20 Hz) eddy-covariance raw data with a Solent-HS (Gill Instruments Ltd.) sonic anemometer and a LI-7500 (LI-COR Biosciences) hygrometer above the target land use type corn. The measuring set-up was continuously running during July 2007 in order to provide turbulent flux data of momentum, sensible and latent heat as well as carbon dioxide. Post-processing was performed using the software package TK2 (developed by the Department of Micrometeorology, University of Bayreuth) which produces quality assured turbulent flux data with an averaging interval of 30 min. The documentation and instruction manual of TK2 (see entry cops_nebt_ubt_info_1) and additional references about the applied flux corrections and post-field data quality control (see entry cops_nebt_ubt_info_2) as well as a document about the general handling of the flux data can be found in supplementary pdf-files within the energy balance and turbulence network (NEBT) experiment of the data base. The turbulent flux data in this data set are flagged according to their quality and checked for an impact of possible internal boundary layers. Additionally, the flux contribution from the target land use type intended to be observed to the total flux measured was calculated applying footprint modeling. Information and references about the internal boundary layer evaluation procedure and the footprint analysis are also given in additional info pdf-files. Pictures of the footprint climatology of the station as related to the land use and to the spatial distribution of the quality flags are included in the additional info pdf-file corresponding to the individual station.

The two energy balance station run by Meteo-France/CNRM measured high-frequency (20 Hz) eddy-covariance raw data with a Solent-HS (Gill Instruments Ltd.) sonic anemometer and a LI-7500 (LI-COR Biosciences) hygrometer above the target land use type corn. The measuring set-up was continuously running during July 2007 in order to provide turbulent flux data of momentum, sensible and latent heat as well as carbon dioxide. Post-processing was performed using the software package TK2 (developed by the Department of Micrometeorology, University of Bayreuth) which produces quality assured turbulent flux data with an averaging interval of 30 min. The documentation and instruction manual of TK2 (see entry cops_nebt_ubt_info_1) and additional references about the applied flux corrections and post-field data quality control (see entry cops_nebt_ubt_info_2) as well as a document about the general handling of the flux data can be found in supplementary pdf-files within the energy balance and turbulence network (NEBT) experiment of the data base. The turbulent flux data in this data set are flagged according to their quality and checked for an impact of possible internal boundary layers. Additionally, the flux contribution from the target land use type intended to be observed to the total flux measured was calculated applying footprint modeling. Information and references about the internal boundary layer evaluation procedure and the footprint analysis are also given in additional info pdf-files. Pictures of the footprint climatology of the station as related to the land use and to the spatial distribution of the quality flags are included in the additional info pdf-file corresponding to the individual station.

'abrupt4xco2' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.3 abrupt4xco2 (6.3 Abrupt 4XCO2) - Version 1: Impose an instantaneous quadrupling of CO2, then hold fixed. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

historicalExt is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 7.4 historicalExt (7.4 Historical Extension) - Version 1: Extend the CMIP5 historical runs to the near-present (as we have for AMIP), rather than ending them in 2005. Simulations extended to at least the end of 2012 using some estimate of recent and future forcing. Groups are free to use whatever concentrations, solar forcing, SO2 emissions etc. they want to use in extending these runs. It is recommended that if an ensemble of "all-forcings" historical simulations have been run, then *each* member of the ensemble should be carried to the end of 2012. If some other forcing is used or if the run is an RCP run that is truncated after a few years, then the run should be considered a "historical extension" experiment with its output placed in a directory named historicalExt. For these historicalExt experiments, the ensemble member (designated by the "rip" value appearing in the filename and recorded as netCDF global attributes) will be identical to the historical run it extends. List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

rcp85 is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 4.2 rcp85 (4.2 RCP8.5) - Version 1: Future projection (2006-2100) forced by RCP8.5. RCP8.5 is a representative concentration pathway which approximately results in a radiative forcing of 8.5 W m-2 at year 2100, relative to pre-industrial conditions. RCPs are time-dependent, consistent projections of emissions and concentrations of radiatively active gases and particles. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

aqua4xco2 is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. aqua4xco2 (6.7b 4xCO2 aqua planet) - Version 2: Consistent with CFMIP requirements, impose a 4xCO2 on zonally uniform SSTs of expt. 6.7a (which is the control for this run). Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

decadals are a group of experiments of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 1.5 decadal (1.5 decadal hindcast/forecast utilizing alternative initializations.) - Version 1: Decadal hindcast/prediction. Comparison of initialization strategies - for example, a repeat of experiment 1.1 using an alternate initialization strategy or alternate initial data. Individual decadal experiments are named decadalXXXX with starting year XXXX. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

'amip4xco2' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.5 amip4xco2 (6.5 4xCO2 AMIP) - Version 1: Identical to expt. 6.2b, but with AMIP SSTs prescribed as in expt. 3.3 (which is the control for this run). Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

piControl is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 3.1 piControl (3.1 Pre-Industrial Control) - Version 1: Pre-Industrial coupled atmosphere/ocean control run. Imposes non-evolving pre-industrial conditions. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .