The SRES data sets were published by the IPCC in 2000 and classified into four different scenario families (A1, A2, B1, B2). SRES_B2 storyline describes a world in which the emphasis is on local solutions to economic, social and enviromental sustainability. The global population is increasing at a lower rate than A2. It has an intermediate level of economic development and a less rapid and more diverse technological change than in A1 and B1. The atmospheric component AGCM2 is a spectral model with triangular truncation at wave no. 32 and 10 vertical levels. The ocean model component based on the GFDL MOM 1.1 code with 29 vertical levels and has a iospycnal / eddy stirring parameterization (Gent and McWilliams,1990). CGCM2 (http://ec.gc.ca/ccmac-cccma/default.asp?lang=En&n=40D6024E-1 ). The changes of anthropogenic emissions of CO2, CH4, N2O and sulphur dioxide are prescribed according to the above mentioned scenario. These data belongs to a set of three ensemble runs, with the CCCma-model, using the SRES_B2 scenario. They provide monthly averaged values of selected variables for the IPCC-DDC.

The SRES data sets were published by the IPCC in 2000 and classified into four different scenario families (A1, A2, B1, B2). SRES_A2 storyline describes a very heterogeneous world with the underlying theme of self-reliance and preservation of local identities. It results in this scenario a continous increasing population together with a slower economic growth and technological change. The atmospheric component AGCM2 is a spectral model with triangular truncation at wave no. 32 and 10 vertical levels. The ocean model component based on the GFDL MOM 1.1 code with 29 vertical levels and has a isopycnal / eddy stirring parameterization (Gent and McWilliams, 1990). CGCM2 (http://ec.gc.ca/ccmac-cccma/default.asp?lang=En&n=40D6024E-1 ). The changes of anthropogenic emissions of CO2, CH4, N2O and sulphur dioxide are prescribed according to the above mentioned scenario. These data belongs to a set of three ensemble runs, with the CCCma-model, using the SRES_A2 scenario. They provide monthly averaged values of selected variables for the IPCC-DDC.

'esmFdbk2' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 5.5-2 esmFdbk2 (5.5-2 ESM feedback 2) - Version 1: Carbon cycle sees historical/rcp45 CO2 concentration, but radiation sees 1% per year rise. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

'historical' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 3.2 historical (3.2 Historical) - Version 1: Simulation of recent past (1850 to 2005). Impose changing conditions (consistent with observations). Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

'historicalGHG' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 7.2 historicalGHG (7.2 GHG-only historical) - Version 1: Historical simulation but with greenhouse gas forcing only. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

'historicalNat' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 7.1 historicalNat (7.1 natural-only historical simulation) - Version 1: Historical simulation but with natural forcing only. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

'sstClimAerosol' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.4a sstClimAerosol (6.4a all aerosol forcing) - Version 1: AMIP-style experiment with control run climatological SSTs and sea ice (as in expt. 6.2a) but with aerosols consistent with conditions in year 2000 of the historical run (expt. 3.2) Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

"esmHistorical" is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 5.2 esmHistorical (5.2 ESM historical): Historical simulation (1850 to 2005) as in experiment 3.2_historical but emissions-forced (with atmospheric CO2 determined by the model itself) Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

'amip4K' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.8 amip4K (6.8 AMIP plus 4K anomaly) - Version 1: Consistent with CFMIP requirements, add a uniform +4 K SST to the AMIP SSTs of expt. 3.3 (which is the "control" for this run). Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

historicalExt is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 7.4 historicalExt (7.4 Historical Extension) - Version 1: Extend the CMIP5 historical runs to the near-present (as we have for AMIP), rather than ending them in 2005. Simulations extended to at least the end of 2012 using some estimate of recent and future forcing. Groups are free to use whatever concentrations, solar forcing, SO2 emissions etc. they want to use in extending these runs. It is recommended that if an ensemble of "all-forcings" historical simulations have been run, then *each* member of the ensemble should be carried to the end of 2012. If some other forcing is used or if the run is an RCP run that is truncated after a few years, then the run should be considered a "historical extension" experiment with its output placed in a directory named historicalExt. For these historicalExt experiments, the ensemble member (designated by the "rip" value appearing in the filename and recorded as netCDF global attributes) will be identical to the historical run it extends. List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .