The SRES data sets were published by the IPCC in 2000 and classified into four different scenario families (A1, A2, B1, B2). SRES_B2 storyline describes a world in which the emphasis is on local solutions to economic, social and enviromental sustainability. The global population is increasing at a lower rate than A2. It has an intermediate level of economic development and a less rapid and more diverse technological change than in A1 and B1. The atmospheric component AGCM2 is a spectral model with triangular truncation at wave no. 32 and 10 vertical levels. The ocean model component based on the GFDL MOM 1.1 code with 29 vertical levels and has a iospycnal / eddy stirring parameterization (Gent and McWilliams,1990). CGCM2 (http://ec.gc.ca/ccmac-cccma/default.asp?lang=En&n=40D6024E-1 ). The changes of anthropogenic emissions of CO2, CH4, N2O and sulphur dioxide are prescribed according to the above mentioned scenario. These data belongs to a set of three ensemble runs, with the CCCma-model, using the SRES_B2 scenario. They provide monthly averaged values of selected variables for the IPCC-DDC.

The SRES data sets were published by the IPCC in 2000 and classified into four different scenario families (A1, A2, B1, B2). SRES_A2 storyline describes a very heterogeneous world with the underlying theme of self-reliance and preservation of local identities. It results in this scenario a continous increasing population together with a slower economic growth and technological change. The atmospheric component AGCM2 is a spectral model with triangular truncation at wave no. 32 and 10 vertical levels. The ocean model component based on the GFDL MOM 1.1 code with 29 vertical levels and has a isopycnal / eddy stirring parameterization (Gent and McWilliams, 1990). CGCM2 (http://ec.gc.ca/ccmac-cccma/default.asp?lang=En&n=40D6024E-1 ). The changes of anthropogenic emissions of CO2, CH4, N2O and sulphur dioxide are prescribed according to the above mentioned scenario. These data belongs to a set of three ensemble runs, with the CCCma-model, using the SRES_A2 scenario. They provide monthly averaged values of selected variables for the IPCC-DDC.

'rcp45' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 4.1 rcp45 (4.1 RCP4.5) - Version 1: Future projection (2006-2100) forced by RCP4.5. RCP4.5 is a representative concentration pathway which approximately results in a radiative forcing of 4.5 W m-2 at year 2100, relative to pre-industrial conditions. RCPs are time-dependent, consistent projections of emissions and concentrations of radiatively active gases and particles. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

historicalMisc is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc . Used forcings in individual ensemble runs (see attached addinfo for more information): r[1-5]i1p2 - LU: land-use change; r[1-5]i1p3 - SI: solar irradiance; r[1-5]i1p4 - AA: anthropogenic aerosols (a mixture of aerosols, not explicitly defined here).

'sstClimAerosol' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.4a sstClimAerosol (6.4a all aerosol forcing) - Version 1: AMIP-style experiment with control run climatological SSTs and sea ice (as in expt. 6.2a) but with aerosols consistent with conditions in year 2000 of the historical run (expt. 3.2) Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

rcp85 is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 4.2 rcp85 (4.2 RCP8.5) - Version 1: Future projection (2006-2100) forced by RCP8.5. RCP8.5 is a representative concentration pathway which approximately results in a radiative forcing of 8.5 W m-2 at year 2100, relative to pre-industrial conditions. RCPs are time-dependent, consistent projections of emissions and concentrations of radiatively active gases and particles. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

'esmFixClim2' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 ( https://pcmdi.llnl.gov/mips/cmip5 ). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. esmFixClim2 (5.4-2 ESM fixed climate 2) - Version 2: Radiation code sees historical/rcp45 CO2 concentration, but carbon cycle sees 1% per year rise. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax ( https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf ) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc .

'esmFdbk2' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 5.5-2 esmFdbk2 (5.5-2 ESM feedback 2) - Version 1: Carbon cycle sees historical/rcp45 CO2 concentration, but radiation sees 1% per year rise. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

'historicalGHG' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 7.2 historicalGHG (7.2 GHG-only historical) - Version 1: Historical simulation but with greenhouse gas forcing only. Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.

'sstClimSulfate' is an experiment of the CMIP5 - Coupled Model Intercomparison Project Phase 5 (https://pcmdi.llnl.gov/mips/cmip5). CMIP5 is meant to provide a framework for coordinated climate change experiments for the next five years and thus includes simulations for assessment in the AR5 as well as others that extend beyond the AR5. 6.4b sstClimSulfate (6.4b sulfate aerosol forcing) - Version 1: AMIP-style experiment with control run climatological SSTs and sea ice (as in expt. 6.2a) but with aerosols consistent with conditions in year 2000 of the historical run (expt. 3.2) Experiment design: https://pcmdi.llnl.gov/mips/cmip5/experiment_design.html List of output variables: https://pcmdi.llnl.gov/mips/cmip5/datadescription.html Output: time series per variable in model grid spatial resolution in netCDF format Earth System model and the simulation information: CIM repository Entry name/title of data are specified according to the Data Reference Syntax (https://pcmdi.llnl.gov/mips/cmip5/docs/cmip5_data_reference_syntax.pdf) as activity/product/institute/model/experiment/frequency/modeling realm/MIP table/ensemble member/version number/variable name/CMOR filename.nc.