From 1 - 10 / 119
  • In July 2022 we mapped the tidal area of the Elbe near Cuxhaven and Brunsbüttel. The data was gathered by UAV (Unmanned Aerial Vehicle) with a RBG camera and a PDGNSS-Rover (Precice Differential Global Navigation Satellite System) in three areas: 1) Otterndorf at low tidal level (beach area), 2) Neufelderkoog at low tidal level (wadden area), 3) Neufeld at high tidal level (flooded reed area). For each area we provide a digital orthophoto and the correlation of the measurement timing to the local sea level. The measurements were obtained at the same time as the radar satellite Sentinel 1 crossed the area. The data is structured in three zip-archives corresponding to the study areas: 1) 20220712_Tnw_Otterndorf.zip: provides the time series data as comma-separated text files (CSV)  provides (a) a digital orthophoto at 1,5 cm resolution, (b) an overview jpg showing of the measurement times and the local sea level, (c) timing of the UAV-flightlines and (d) two PDGNSS measurement series collected simultaneously as csv. (downloadable as 10.4 GB zip archive),  2) 20220712_Tnw_NeufelderkoogPriel.zip: provides (a) a digital orthophoto at 2 cm resolution and (b) an overview jpg showing of the measurement times and the local sea level (downloadable as 6,3 GB zip archive),  3) 20220720_Thw_Neufeld.zip: provides (a) a digital orthophoto at 2 cm resolution and (b) an overview jpg showing of the measurement times and the local sea level (downloadable as 8,4 GB zip archive). The data is used in the frame of the project "satellite based water-land-boundary detection" (Sat-Land-Fluss), as validation for Sentinel-1 derived water-land determinations. Sat-Land-Fluss was a R&D project lasting from 2020-2024, funded by the German Federal Ministry for Digital and Transport in the 4th project call "National Copernicus Application" (50EW2015).

  • The digital terrain model of waterways for the estuary of river Elbe (DGM-W 2022) in high resolution based on airborne laser scanning and echo sounder data is produced and published by the German Federal Waterways and Shipping Administration (Wasserstraßen- und Schifffahrtsverwaltung des Bundes, WSV). The data includes the Outer Elbe and the tidally influenced tributaries and branches of the Elbe estuary upstream to the town Geesthacht. The data is available in a raster resolution of 1 meter. Coordinate reference system: EPSG 25852, ETRS89 / UTM Zone 32N Elevation reference system: DHHN2016, NHN Survey methods: Airborne laser scanning (ALS) 02.04.2022 - 19.04.2022 Multibeam echo sounder, single beam echo sounder 09.02.2017 - 09.04.2023 It is strongly recommended to use the data source map for quality assessment.

  • Classilied polygon data set of various sedimentological parameters for the German Bight area. Polygons are based on a triangulated model grid (spatial resolution: 250 m * 250 m). Parameters: - "Median_Grain_Size": median grain size (D50) of interpolierted grain size distribution, - "Mean_Grain_Size": mean grain size´ of interpolierted grain size distribution, - "Sorting1": sorting after Trask (1932): sqrt(D75/D25) - "Sorting2": sorting after Folk and Ward (1957): (phi84-phi16)/4+(phi95-phi5)/6.6 - "Skewness": Skewness after Folk and Ward (1957): (phi16+phi84-2phi50)/2(phi84-phi16)+(phi5+phi95-2phi50)/2(phi95-phi5) - "Kurtosis": Kurtosis after Folk and Ward (1957): (phi95-phi5)/2.44(phi75-phi25) - "GSF_micrometer": content of sand fractions (half phi grad intervals) [%], 63 to 2000 micrometers - "PredominantSandFractions": spatial distribution of sediment fractions with a coontent 50 % / 20 % - 50 %. Data were generated within the framework of the German Coastal Engineering Research Council project AufMod ("Development of integrated model systems for the analysis of long-term morphodynamics in the German Bight", 01.11.2009-31.12.2012). For more information, please visit: https://gdi.bsh.de/en/data/Sedimentological-Parameters-Classified-Polygons-Project-AufMod_Information_Sedimentologische_Parameter_klassifizierte_Polygone_-Projekt_AufMod-_DE.pdf

  • The digital terrain model of waterways for the estuary of river Elbe (DGM-W 2016) in high resolution based on airborne laser scanning and echo sounder data is produced and published by the German Federal Waterways and Shipping Administration (Wasserstraßen- und Schifffahrtsverwaltung des Bundes, WSV). The data includes the Outer Elbe and the tidally influenced side branches of the Elbe estuary upstream to the town Geesthacht. The data is available in a raster resolution of 1 meter. Coordinate reference system: EPSG 25852, ETRS89 / UTM Zone 32N Elevation reference system: DHHN92, NHN Survey methods: Airborne laser scanning (ALS) 02. - 04.2016 Multibeam echo sounder, single beam echo sounder 2015-2017 It is strongly recommended to use the data source map for quality assessment.

  • Classilied polygon data set of various sedimentological parameters for the German Bight area. Polygons are based on a triangulated model grid (spatial resolution: 250 m * 250 m). Parameters: - "Median_Grain_Size": median grain size (D50) of interpolierted grain size distribution, - "Mean_Grain_Size": mean grain size´ of interpolierted grain size distribution, - "Sorting1": sorting after Trask (1932): sqrt(D75/D25) - "Sorting2": sorting after Folk and Ward (1957): (phi84-phi16)/4+(phi95-phi5)/6.6 - "Skewness": Skewness after Folk and Ward (1957): (phi16+phi84-2phi50)/2(phi84-phi16)+(phi5+phi95-2phi50)/2(phi95-phi5) - "Kurtosis": Kurtosis after Folk and Ward (1957): (phi95-phi5)/2.44(phi75-phi25) - "GSF_micrometer": content of sand fractions (half phi grad intervals) [%], 63 to 2000 micrometers - "PredominantSandFractions": spatial distribution of sediment fractions with a coontent 50 % / 20 % - 50 %. Data were generated within the framework of the German Coastal Engineering Research Council project AufMod ("Development of integrated model systems for the analysis of long-term morphodynamics in the German Bight", 01.11.2009-31.12.2012). For more information, please visit: https://gdi.bsh.de/en/data/Sedimentological-Parameters-Classified-Polygons-Project-AufMod_Information_Sedimentologische_Parameter_klassifizierte_Polygone_-Projekt_AufMod-_DE.pdf

  • Classilied polygon data set of various sedimentological parameters for the German Bight area. Polygons are based on a triangulated model grid (spatial resolution: 250 m * 250 m). Parameters: - "Median_Grain_Size": median grain size (D50) of interpolierted grain size distribution, - "Mean_Grain_Size": mean grain size´ of interpolierted grain size distribution, - "Sorting1": sorting after Trask (1932): sqrt(D75/D25) - "Sorting2": sorting after Folk and Ward (1957): (phi84-phi16)/4+(phi95-phi5)/6.6 - "Skewness": Skewness after Folk and Ward (1957): (phi16+phi84-2phi50)/2(phi84-phi16)+(phi5+phi95-2phi50)/2(phi95-phi5) - "Kurtosis": Kurtosis after Folk and Ward (1957): (phi95-phi5)/2.44(phi75-phi25) - "GSF_micrometer": content of sand fractions (half phi grad intervals) [%], 63 to 2000 micrometers - "PredominantSandFractions": spatial distribution of sediment fractions with a coontent 50 % / 20 % - 50 %. Data were generated within the framework of the German Coastal Engineering Research Council project AufMod ("Development of integrated model systems for the analysis of long-term morphodynamics in the German Bight", 01.11.2009-31.12.2012). For more information, please visit: https://gdi.bsh.de/en/data/Sedimentological-Parameters-Classified-Polygons-Project-AufMod_Information_Sedimentologische_Parameter_klassifizierte_Polygone_-Projekt_AufMod-_DE.pdf

  • Data were generated within the framework of the German Coastal Engineering Research Council project AufMod ("Development of integrated model systems for the analysis of long-term morphodynamics in the German Bight", 01.11.2009-31.12.2012). Various sedimentological parameters processed as products for the German Bight area were calculated from interpolated grain size distributions (spatial resolution of model grid 250 m * 250 m): - "Median_Grain_Size": Median-Durchmesser (D50) der interpolierten Kornsummenkurve - "Mean_Grain_Size": Mittelwert des Korndurchmessers - "Sorting1": Sortierung after Trask (1932): sqrt(D75/D25) - "Sorting2": Sortierung after Folk and Ward (1957): (phi84-phi16)/4+(phi95-phi5)/6.6 - "Skewness": Skewness after Folk and Ward (1957): (phi16+phi84-2phi50)/2(phi84-phi16)+(phi5+phi95-2phi50)/2(phi95-phi5) - "Kurtosis": Kurtosis after Folk and Ward (1957): (phi95-phi5)/2.44(phi75-phi25) - "GSF_micrometer": content of sand fractions (half phi grad intervals) [%], 63 to 2000 micrometers - "PredominantSandFractions": spatial distribution of sediment fractions with a coontent 50 % / 20 % - 50 %.

  • This dataset contains in-situ measurements of ship-generated wave heights and currents collected during 14 campaigns from 1998 to 2022 in German coastal waterways. It includes 81,092 filtered datapoints (from an initial 97,877) across 46 measurement stations in 28 cross-sections, with 23 unique locations, some of which were repeated after a certain time. Each wave event is linked to the ship and nautical parameters responsible for its generation. A more detailed metadata description for each campaign is attached to the dataset. Citation for this data set: Seemann, A.; Melling, G. (2024): Ship Wave Measurements in German Coastal Waterways from 1998 to 2022 [Dataset], DOI: https://doi.org/10.48437/42c292-ebac3d

  • DTM of the German Bight (yearly, 1982 - 2012). Spatiotemporally interpolated bathymetries for the years 1982 to 2012, with two parameters for the purposes of reliability: Confidence and Minimum dt. The parameter Confidence [m] indicates the reliability of the modelled bathymetry. Spatial resolution: 50 m, file format: CSV. Data were generated within the framework of the German Coastal Engineering Research Council project AufMod ("Aufbau integrierter Modellsysteme zur Analyse der langfristigen Morphodynamik in der Deutschen Bucht" ["Development of integrated model systems for the analysis of long-term morphodynamics in the German Bight"], 01.11.2009-31.12.2012).

  • DTM of the German Bight (yearly, 1982 - 2012). Spatiotemporally interpolated bathymetries for the years 1982 to 2012, with two parameters for the purposes of reliability: Confidence and Minimum dt. The parameter Confidence [m] indicates the reliability of the modelled bathymetry. Spatial resolution: 50 m, file format: CSV. Data were generated within the framework of the German Coastal Engineering Research Council project AufMod ("Aufbau integrierter Modellsysteme zur Analyse der langfristigen Morphodynamik in der Deutschen Bucht" ["Development of integrated model systems for the analysis of long-term morphodynamics in the German Bight"], 01.11.2009-31.12.2012).

Barrierefreiheit | Datenschutz | Impressum