This collection contains cloud-filtered monthly composites of Sentinel-2 Level 1C data. Sentinel-2 is a wide-swath, high-resolution, multi-spectral imaging mission developed by ESA as part of the Copernicus Programme, supporting the Copernicus Land Monitoring services, including the monitoring of vegetation, soil and water cover, as well as the observation of inland waterways and coastal areas. The full Sentinel-2 mission comprises two polar-orbiting satellites in the same orbit, phased at 180° to each other. File format: NetCDF Sensor: MSI (Multispectral Instrument) Repeat rate: 5 days (with two satellites) Launch dates: 23 June 2015 (Sentinel-2A), 07 March 2017 (Sentinel-2B) Archiving start date: 27 June 2015 Mission Status: ongoing Terms and conditions for the use of Sentinel data https://scihub.copernicus.eu/twiki/pub/SciHubWebPortal/TermsConditions/TC_Sentinel_Data_31072014.pdf Sentinel-2 Mission Overview https://sentinel.esa.int/web/sentinel/missions/sentinel-2 Sentinel-2 Level-1C Processing Overview https://earth.esa.int/web/sentinel/technical-guides/sentinel-2-msi/level-1c-processing Sentinel-2 spatial resolution https://sentinels.copernicus.eu/web/sentinel/user-guides/sentinel-2-msi/resolutions/spatial Sentinel-2 radiometric resolution and band numbering https://sentinels.copernicus.eu/web/sentinel/user-guides/sentinel-2-msi/resolutions/radiometric Sentinel-2 acquisition plans: https://sentinels.copernicus.eu/web/sentinel/missions/sentinel-2/acquisition-plans
Description: Spatial and seasonal distributions of selected species of seabirds in the German Bight. Data source: TOPAS-Windobs Datenbank + TOPAS-FTZobs Datenbank. These are data from Environmental Impact Assessments (EIS) and monitoring studies under the permit procedures of BSH in the North Sea EEZ and research data of the FTZ. Data collection: Ship-based and aircraft-based transect counts. The basis of all ship-based seabird counts is the standardized method described by Tasker et al. (1984) and Garthe et al. (2002). Following this method, seabirds within a transect strip of known length and width were recorded. Thus the number of birds per area (density) can be calculated. Seabird counts from aircrafts are described in Diederichs et al. (2002). It is also a transect based method. Time periods: Ship: June 2000 to Aug. 2013, aircraft: March 2002 to June 2013. Data analysis: Based on all survey years; for each species (or species group) and each species-specific season the mean density [individuals/km²] per raster cell is calculated as "the sum of the counted seabirds divided by the sum of the survey effort inside the raster cell". Species specific correction factors were used for the calculation of the density (Garthe et al. 2007, 2009; Markones and Garthe 2012). For divers separate correction factors were calculated for each single data collection team and then combined into a weighted average. Product description: Vector raster with "10 km x 10 km" raster cells (EPSG 3035). WMS: classification by mean density (5 ranges), visualization by graduated symbols. Bibliography see: ftp://ftp.bsh.de/outgoing/gdi-bsh/public/M/M5/docs/Seebirds_density_bibliography.htm
This collection contains Sentinel-1 Level-2 Ocean (OCN) products for wind, wave and currents applications which may consist of the following geophysical components: Ocean Wind field (OWI), Ocean Swell spectra (OSW), and Surface Radial Velocity (RVL). The availability of components depends on the acquisition mode. Sentinel-1 is a polar-orbiting, all-weather, day-and-night C-band radar imaging mission funded by the European Union and carried out by the ESA within the Copernicus Programme, consisting of a constellation of two satellites. Sensor: C-SAR (Synthetic Aperture Radar) Repeat rate: 12 days (1 satellite), 6 days (2 satellites) Launch date: 03 April 2014 Archiving start date: 12 April 2014 Mission Status: ongoing Terms and conditions for the use of Sentinel data https://scihub.copernicus.eu/twiki/pub/SciHubWebPortal/TermsConditions/TC_Sentinel_Data_31072014.pdf Sentinel-1 Mission Overview https://sentinel.esa.int/web/sentinel/missions/sentinel-1 Sentinel-1 Level-2 OCN Products Overview https://earth.esa.int/web/sentinel/technical-guides/sentinel-1-sar/products-algorithms/level-2-algorithms Spatial resolution of Sentinel-1 Level-2 OCN data: https://sentinels.copernicus.eu/web/sentinel/user-guides/sentinel-1-sar/resolutions/level-2-ocean File format of measurement data: netCDF Suggested software: ESA SNAP/Sentinel Toolbox (http://step.esa.int/main/download/) Please note: Support for OCN-data is still limited. Sentinel-1 acquisition plans: https://sentinel.esa.int/web/sentinel/missions/sentinel-1/observation-scenario/acquisition-segments
This collection contains radar image products of the German national TerraSAR-X mission acquired in Spotlight mode. Spotlight imaging allows for a spatial resolution of up to 2 m at a scene size of 10 km (across swath) x 10 km (in orbit direction). TerraSAR-X is a sun-synchronous polar-orbiting, all-weather, day-and-night X-band radar earth observation mission realized in the frame of a public-private partnership between the German Aerospace Center (DLR) and Airbus Defence and Space. For more information concerning the TerraSAR-X mission, the reader is referred to: http://www.dlr.de/dlr/en/desktopdefault.aspx/tabid-10377/565_read-436/
Statistik Metadaten Genesis Datenbank
The data cover all measuring stations of the Baltic Sea coast of Mecklenburg-Vorpommern. The data includes current, pressure for sea state and gauge measurement, water temperature and air pressure. Optionally data of wind speed, wind direction and air temperature can be collected.
This collection contains Sentinel-3 Level-2 Land products derived from the Sea and Land Surface Temperature Radiometer (SLSTR). The data consist of land surface parameters, including the land surface temperature (LST), generated on a 1 km measurement grid. The Sentinel-3 mission, jointly operated by ESA and EUMETSAT, is designed as a constellation of two identical polar orbiting satellites, separated by 180°, for the provision of long-term operational marine and land monitoring services. Sensor: SLSTR (Sea and Land Surface Temperature Radiometer) Revisit time: <2 days at the equator Launch date: 16 February 2016 Archiving start date: 29 February 2016 Mission Status: ongoing Terms and conditions for the use of Sentinel data https://scihub.copernicus.eu/twiki/pub/SciHubWebPortal/TermsConditions/TC_Sentinel_Data_31072014.pdf Sentinel-3 Mission Overview https://sentinel.esa.int/web/sentinel/missions/sentinel-3 Sentinel-3 SLSTR Level-2 Products Overview and Processing Levels https://sentinel.esa.int/web/sentinel/technical-guides/sentinel-3-slstr/level-2-algorithms-products https://sentinels.copernicus.eu/web/sentinel/user-guides/sentinel-3-slstr/processing-levels/level-2 Spatial resolution of Sentinel-3 SLSTR data: https://sentinels.copernicus.eu/web/sentinel/user-guides/sentinel-3-slstr/resolutions File format of measurement data: netCDF Suggested software: ESA SNAP/Sentinel Toolbox (http://step.esa.int/main/download/) Sentinel-3 SLSTR coverage: https://sentinel.esa.int/web/sentinel/user-guides/sentinel-3-slstr/coverage
The data cover 12 to 36 hours predictions as result of the BSH circulation model. resolution about 1 nautical mile (E-W 100'', N-S 60'') on a spharical grid. 3D-parameters (except wind, waterlevel and ice) have been computed for vertical levels with lower limits (meter) of 8, 16, 24, 50, 100, 150, 200, 250, 1000.
This collection contains Sentinel-3 Level-2 Land products derived from the OLCI (Ocean and Land Colour) instrument. The data consist of land and atmospheric geophysical products at full (~300m) and reduced (~1.2km) resolutions. The Sentinel-3 mission, jointly operated by ESA and EUMETSAT, is designed as a constellation of two identical polar orbiting satellites, separated by 180°, for the provision of long-term operational marine and land monitoring services. Sensor: OLCI (Ocean Land Colour Instrument) Revisit time: <2 days at the equator Launch date: 16 February 2016 Archiving start date: 29 February 2016 Mission Status: ongoing Terms and conditions for the use of Sentinel data https://scihub.copernicus.eu/twiki/pub/SciHubWebPortal/TermsConditions/TC_Sentinel_Data_31072014.pdf Sentinel-3 Mission Overview https://sentinel.esa.int/web/sentinel/missions/sentinel-3 Sentinel-3 OLCI Level-2 Products Overview and Processing Levels https://sentinel.esa.int/web/sentinel/technical-guides/sentinel-3-olci/level-2-algorithms-products https://sentinels.copernicus.eu/web/sentinel/user-guides/sentinel-3-olci/processing-levels/level-2 Spatial resolution of Sentinel-3 OLCI data: https://sentinels.copernicus.eu/web/sentinel/user-guides/sentinel-3-olci/resolutions/spatial File format of measurement data: netCDF Suggested software: ESA SNAP/Sentinel Toolbox (http://step.esa.int/main/download/) Sentinel-3 OLCI coverage: https://sentinel.esa.int/web/sentinel/user-guides/sentinel-3-olci/coverage
Objective weather types of Deutscher Wetterdienst derived from different Reanalysis and Global Climate Model simulations for the control run (1951-2000) and the projection period (2000-2100). Forthermore, the NAO-index is also provided. On the one hand, the dataset is useful for evaluation of representative circulation statistics in Central Europe, on the other hand, for the analysis of future weather types due to climate change. Added temperature and precipitation data allow to study the weather type effectiveness for these important climate parameters.
Datenschutz | Impressum